ERGONOMIC WIRELESS BLUETOOTH MOUSE

Package Contents

• 1x vertical mouse
• 1x receiver
• 1x USB charging cable
• 1x manual

The package includes a vertical mouse, a receiver, a USB charging cable, and a manual.

System Requirements

IBM or compatible computers

• Windows: 2000/ME/XP(x64)/7/8/10
• Mac OS x (over V10.4)
• One available USB port

Technical Parameters

Product Function Diagram

The mouse features the following components:

• 1. DPI key
• 2. Non-slip scroll wheel
• 3. Left/right button
• 4. Thumb grip design
• 5. Forward/backward key
• 6. Charging interface
• 7. Optical sensor system
• 8. Bluetooth pairing button
• 9. Power on/off switch
• 10. 2.4GHz and Bluetooth toggle switch
• 11. Nano receiver slot
• 12. Anti-slip tape

Product Usage

2.4 GHz Mode

1. Take out the receiver from the bottom of the mouse.
2. Insert the receiver into the computer's USB port.
3. Slide switch "10" [2.4GHz/Bluetooth toggle] to select 2.4GHz.
4. Slide switch "9" [Power on/off] to power on. When the mouse cursor appears on the computer screen, you can use the mouse normally.

Bluetooth Mode

1. Slide switch "10" [2.4GHz/Bluetooth toggle] to select Bluetooth.
2. Slide switch "9" [Power on/off] to power on.
3. Press Bluetooth button "8" for 2-3 seconds, then pair the mouse with your device by selecting "Bluetooth Mouse". When the mouse cursor appears, you can use the mouse freely.

Attention

1. In order to prolong battery life, please use the mouse on a white or light-colored desk.
2. Please turn the power switch off if you don't use the mouse for a long time to prevent battery leakage and product damage.

Frequently Asked Questions

1. If it doesn't work, what can we do?

• Make sure the battery is fully charged.
• Check if the USB receiver is seated firmly.
• When the mouse is in sleep mode, wake it up by turning the power switch "9" [Power on/off] off and on.

2. When the mouse moves slowly or malfunctions, what can we do?

• Increase the distance between the mouse and other computer or equipment.
• Turn off other wireless devices.
• Using the mouse on a metal surface (like copper, iron, aluminum) may affect transmission and extend the mouse's response time.

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

RF exposure: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.