ULTIMEA Nova S50 User Manual

About This Manual

Please read this user manual carefully and save it for future reference.

Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

Safety Instructions

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g. liquid filled objects, lit candles).
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
• The adapter should be installed near the device and should be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

Proper Disposal Instructions

This mark shown on the product or its packaging indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

FCC Regulatory Compliance

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Warnings

This device contains licence-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.

This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body. Cet équipement est conforme aux limites d'exposition IC définies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et la carrosserie.

Contents

01 User Manual - English

Connection and Installation - 02

05 Benutzerhandbuch - Deutsch

Anschluss und Installation - 06

09 ユーザーマニュアル - 日本語

接続と設置 - 10

13 Mode d'Emploi - Français

Raccordement et installation - 14

17 Manuale d'uso - Italiano

Connessione e installazione - 18

21 Manual del usuario - Español

Conexión e instalación - 22

Accessories

Subwoofer

Soundbar

Included Accessories:

• Power Adapter (x1)
• 3.5mm to 3.5mm Stereo Audio Cable (x1)
• HDMI Cable (x1)
• HDMI Adapter (x1)
• Digital Optical Cable (x1)
• Remote Control (x1)
• Wall Mount Kit (x4)
• Wall Bracket (x2)
• User Manual (x1)

Soundbar Controls

Control Panel:

1. Power Button: Press to turn on / Press and hold for 3 seconds to turn off.
2. Input Mode Button: Press to cycle through channels: eARC-OPT-BT-AUX-USB.
3. BT Button: Press to switch to BT channel / Press and hold for 3 seconds to disconnect the current device and connect to a new device (BT ID: Nova S50).
4. Volume Down Button:
5. Volume Up Button:

Remote Control

1. Power Button: Press to turn on / Press and hold for 3 seconds to turn off.
2. eARC Button: Press to switch to HDMI eARC channel.
3. BT Button: Press to switch to BT channel / Press and hold for 3 seconds to disconnect the current device and connect to a new device (BT ID: Nova S50).
4. OPT Button: Press to switch to Optical channel.
5. AUX Button: Press to switch to AUX channel.
6. USB Button: Press to switch to USB channel.
7. LED Button: Press to turn on the LED, press again to turn it off.
8. Volume Up Button:
9. Volume Down Button:
10. Previous Button: In BT and USB modes: Go to the previous track.
11. Next Button: In BT and USB modes: Go to the next track.
12. Play/Pause Button: For BT and USB modes only. Press and hold for 3 seconds to switch from single loop playback to list loop playback.
13. MOVIE Button: Switch to MOVIE mode.
14. GAME Button: Switch to GAME mode.
15. MUSIC Button: Switch to MUSIC mode.
16. BASSMX™ Button: Adjust bass level; the display shows: "BS-1", "BS 0", "BS 1".
17. Mute Button: Mute / Restore volume.

Connecting to the Subwoofer

Connect the SUB OUT port on the soundbar to the SUB IN port on the subwoofer using a suitable cable (not included).

Diagram showing the back panel connections of the soundbar and subwoofer, with arrows indicating the SUB OUT to SUB IN connection.

Connecting to the TV via HDMI eARC / ARC

Step 1: Connect one end of the HDMI cable to the HDMI (eARC/ARC) port on the soundbar.

Step 2: Connect the other end to the eARC/ARC port on the TV.

Step 3: Press the "eARC" button on the remote control to select the "HDMI (eARC)" input.

Note: The TV's HDMI port must support eARC to transmit Dolby Atmos audio format. For Dolby Atmos content, set the TV's audio output to "Pass Through". For DTS content, set the TV's audio output to "PCM".

Difference between HDMI IN, HDMI ARC, HDMI eARC:

• HDMI IN: Standard HDMI input for connecting devices. Supports audio and video but not ARC or eARC.
• HDMI ARC: Supports bidirectional communication between TV and audio system, allowing audio to be sent from TV to audio system and vice versa.
• HDMI eARC: An updated version of HDMI ARC that supports higher quality audio formats like Dolby Atmos and DTS:X.

Note: Enable the "CEC" function on your TV. When connected via eARC/ARC, the TV remote can control the soundbar's power and volume simultaneously.

Connecting to the TV via Optical/Auxiliary

Option 1: Optical

1. Ensure the cable is connected from the TV's OPTICAL OUT port to the Soundbar's OPTICAL port.
2. Ensure the optical plug is inserted correctly. Do not insert it backwards or damage the optical connector.

Note: If audio is played from the TV's internal speakers, disable or minimize the TV's volume. If no sound is heard in optical mode, try setting the TV's digital audio output to PCM.

Option 2: Aux

1. Connect the 3.5mm to 3.5mm audio cable to the TV's RCA AUDIO OUT port.
2. The TV's AUDIO IN port is not supported.

Note: Remember to disconnect the AUX cable from the TV and Soundbar when you want to use another mode.

Connecting via Bluetooth

1. Press the ">" button on the soundbar or remote control to enter Bluetooth pairing mode.
2. Open your phone's Bluetooth settings, find and select "Nova S50" to connect the soundbar.

Note: If already in Bluetooth mode and connected, press and hold the ">" button for 3 seconds to disconnect the current device and manually connect to a new device on your mobile phone/PC/TV.

Diagram showing Bluetooth pairing process on a phone.

Placement Options

The soundbar can be placed below the television.

Diagram illustrating soundbar placement below a TV.

Wall Installation

Diagrams showing different wall mounting configurations for the soundbar.

Diagram showing how to use the HDMI (eARC/ARC) port for audio transmission.

Specifications

Model Number: U2120

Power Supply: AC 100-240V~50/60Hz

Driver Size: Soundbar: 2.25" (x4) + 1" (x2) (Full Range + Tweeter); Subwoofer: 6.5" (x1) (Passive Radiator)

Frequency Response: 45Hz - 20KHz

Power Output: 190W

Standby Power: <0.5W

Operating Temperature: 41°F/5°C to 95°F/35°C

Bluetooth Version: 5.3

Dimensions:

• Soundbar: 800mm x 60mm x 70mm (31.5" x 2.36" x 2.76")
• Subwoofer: 240mm x 240mm x 240mm (9.45" x 9.45" x 9.45")
• Packaging: 832mm x 290mm x 300mm (32.76" x 11.42" x 11.81")
• Gross Weight: 6.9Kg (15.21 lbs)

Declaration of Conformity

Manufacturer: Dynanic (Shenzhen) Technology Limited

Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000

Declare under their sole responsibility that the product:

Trade Mark: ULTIMEA

Product Name: Nova S50 2.1 Channel Virtual Atmos Soundbar

Model No.: U2120

To which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/65/EU). Product is responsible to affix CE marking, the following standards were applied:

EN 55032:2015/A11:2020, EN 55035:2017/A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013/A1:2019, ETSI EN 301 489-1 V2.2.3(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09), EN 300 328 V2.2.2(2019-07), EN 50663:2017, EN IEC 62368-1:2020+A11:2020, IEC62321-3-1:2013, IEC 62321-4:2013+A1:2017, IEC 62321-5:2013, IEC 62321-6:2015, IEC 62321-7-1:2015, IEC 62321-7-2:2017, IEC 62321-8:2017

Full Name: Yoyo. Yu

Position: Approbation Manager

Signature: yoyo yu

Place/Date: Shenzhen, China/Dec. 25-2022

Trade Marks:

Dolby Atmos: Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright 2012-2021 Dolby Laboratories. All rights reserved.

Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Soundlab Technology Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners.

HDMI™: The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other.

EC REP: Dynanic GmbH, Buchenring 57, 22359 Hamburg, Germany

UK REP: UK Crossborder limited, 7 Bell Yard London WC2A 2JR, UK United Kingdom

Made in China

Support: If you need our support, kindly reach out to our service team. We are always glad to help.

Contact:

• +1 888-598-8875 (US)
• +49 89-628-25828 (EU)
• support@ultimea.com
• support@ultimea.de
• support.ultimea.com
• support.ultimea.de

Social Media:

• f (Facebook)
• (Instagram)
• (YouTube)
• (TikTok)

ULTIMEA Official