Ultimea Nova S90 7.1.4 Channel Dolby Atmos Soundbar User Manual

System Overview

The Ultimea Nova S90 is a 7.1.4 channel Dolby Atmos soundbar system designed to deliver immersive audio experiences. The system includes a main soundbar, a subwoofer, and two surround speakers, supporting Dolby Atmos, HDMI, and Bluetooth connectivity.

Accessories List

• Subwoofer (x1)
• Soundbar (x1)
• Surround Speaker (x2)
• Soundbar Power Adaptor (x1)
• Subwoofer Power Cable (x1)
• Surround Speaker Power Adaptor (x1)
• HDMI Cable (x1)
• HDMI Adaptor (x1)
• Digital Optical Cable (x1)
• Stereo 3.5mm to RCA Audio Cable (x1)
• 8-pin Cable for Soundbar Connection (140mm) (x1)
• Remote Control (x1)
• Wall Mounted Kit (x1)
• Wall Bracket (x1)
• User Manual (x1)

Soundbar Controls

Control Panel:

• 1: ? [Power Button] - Press to power on/off.
• 2: ➡️ [Input Mode] - Switch channels: eARC, HDMI IN1, HDMI IN2, OPTICAL, BT, AUX, USB.
• 3: ? [Bluetooth] - Switch to Bluetooth channel and enter pairing mode. Hold for 3 seconds to disconnect current device and connect to a new device.
• 4: ⬇️ [Volume Down]
• 5: ⬆️ [Volume Up]

Remote Control

• 1: ? [Power Button] - Press to power on/off.
• 2: ➡️ [eARC] - Switch to HDMI eARC channel.
• 3: ➡️ [HDMI IN] - Switch to HDMI IN channel.
• 4: ➡️ [OPTICAL] - Switch to OPTICAL channel.
• 5: ➡️ [AUX] - Switch to AUX channel.
• 6: ? [Bluetooth] - Switch to BLUETOOTH channel.
• 7: ➡️ [USB] - Switch to USB channel.
• 8: ? [SUB PAIR] - Press and hold for 3 seconds to pair with the subwoofer.
• 9: ? [USB REPEAT] - Switch between single loop and list loop playback.
• 10: ⬆️ [Volume Up]
• 11: ⬇️ [Volume Down]
• 12: ◀️ [Previous Track] - For BT and USB mode only.
• 13: ▶️ [Next Track] - For BT and USB mode only.
• 14: ▶️⏸️ [Play/Pause] - For BT and USB mode only.
• 15: ? [MUTE]
• 16: ? [LED DIMMER] - Adjust display brightness (5 levels), hold for 3s to turn off LED.
• 17: ?️ [BASSMAX] - Adjust bass level (B5-6 to B5+6).
• 18: ?️ [MIDRANGE] - Adjust midrange level (MR-6 to MR+6).
• 19: ?️ [TREBLE] - Adjust treble level (TB-6 to TB+6).
• 20: ? [MOVIE] - Switch to MOVIE mode.
• 21: ? [MUSIC] - Switch to MUSIC mode.
• 22: ?️ [VOICE] - Switch to VOICE mode.
• 23: ? [SPORT] - Switch to SPORT mode.
• 24: ? [GAME] - Switch to GAME mode.
• 25: ? [NIGHT] - Switch to NIGHT mode.
• 26: ? [SURROUND] - Adjust surround sound level (SR-6 to SR+6).
• 27: ? [UP-FIRING] - Adjust up-firing volume level (UP-3 to UP+3).

Soundbar Installation

Assembly Steps:

1. Step 1: Set the two parts of the Soundbar on the same level and align the connection joints. Connect the two parts by pushing parallelly to combine as one piece.
2. Step 2: Plug in the 8-pin Cable.

Connections

Connect to TV via HDMI OUT eARC / ARC

Step 1: Connect one end of the HDMI cable to the eARC / ARC port on the back of your TV.

Step 2: Connect the other end into the HDMI OUT(eARC) port of the soundbar.

Step 3: Press the "eARC" button on the remote control to select "eARC" input.

Notes:

• Ensure your TV HDMI supports eARC for Dolby Atmos audio transmission.
• For Dolby Atmos movies, set TV audio output to Pass Through (TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through).
• For DTS movies, set TV audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
• HDMI IN: Standard input for audio/video.
• HDMI ARC: Supports two-way communication for audio return.
• HDMI eARC: Enhanced Audio Return Channel, supports higher quality audio like Dolby Atmos and DTS:X.
• Enable the "CEC" function on your TV for simultaneous control of soundbar and TV (power on/off, volume).

Connect to Other Device via HDMI IN1 / HDMI IN2

Step 1: Connect the HDMI Cable from the Soundbar's HDMI OUT (eARC) port to the TV's HDMI IN (eARC / ARC) port.

Step 2: Connect an HDMI cable from the other device's (e.g., DVD player, game console) HDMI OUT port to the Soundbar's HDMI IN1 / HDMI IN2 port.

Step 3: Press the input button on the Soundbar or Remote Control to switch to HDMI IN1 / HDMI IN2 channel.

Note: Your TV HDMI needs to support eARC to transmit the Dolby Atmos audio format to your Soundbar.

Connect to TV via OPTICAL / AUX

Option 1: OPTICAL

1. Ensure the TV's port is OPTICAL OUT. Connect both ends of the optical cable to the OPTICAL ports on the TV and soundbar.

2. Insert the optical plug correctly; do not insert it upside down.

Note: If audio is coming from the TV speakers, mute or minimize the TV volume.

In Optical Mode: If there is no sound, try setting the TV audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).

Option 2: AUX

1. Connect the 3.5mm to RCA audio cable to your TV's RCA AUDIO OUT port.

2. Ensure the cable colors match the TV port colors.

Note: Unplug the AUX cable from the TV and Soundbar when switching to other modes.

Connect to Bluetooth

1. Press the ? [Bluetooth] button on the soundbar or remote control to enter Bluetooth pairing mode.

2. On your phone, go to Bluetooth settings, find and select "Nova S90" to connect.

Note: If already connected, press and hold the ? [Bluetooth] button for 3 seconds to disconnect the current device and manually connect to a new device on your mobile phone, PC, or TV.

Pairing Subwoofer

The subwoofer is factory paired with the soundbar. Re-pairing may be necessary if no sound is produced by the subwoofer.

Step 1: Press and hold the "SUB PAIR" ? button on the remote control for 3 seconds until the soundbar displays "SUB" flashing.

Step 2: Press and hold the "PAIR" button on the subwoofer for 5 seconds until its white LED light flashes. The subwoofer is paired successfully when the white LED light becomes solid.

Note: The 'SUB OUT' interface on the subwoofer is a reserved port. An optional active subwoofer can be purchased and connected here for enhanced bass.

Pairing Surround Speaker

For optimal listening, ensure the switches on the back of the surround speakers are set to "L" and "R" respectively before pairing.

The surround speakers are factory paired. Re-pairing may be necessary if no sound is produced by the surround speakers.

Step 1: Press and hold the "SURROUND" ? button on the remote control for 5 seconds until the soundbar displays "SUR" flashing.

Step 2: Press and hold the "PAIR" button on the surround speakers for 5 seconds until their white LED lights flash. The surround speakers are paired successfully when the white LED lights become solid.

Placement Options

The soundbar and surround speakers should be placed at or near ear level for the best listening experience.

Wall Mount Installation

Step 1: Attach mounting brackets to the TV or wall.

Step 2: Mount the soundbar using the brackets.

Step 3: Mount the surround speakers using the brackets.

Note: Use the HDMI Adaptor for easier plugging and unplugging of the HDMI Cable.

Specifications

Safety Instructions

• Please read this user manual carefully and save it for future reference.
• Do not make unauthorized alterations to the product, as this may compromise safety, regulatory compliance, system performance, and may void the warranty.
• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not place dangerous items on top of this device (e.g., liquid-filled objects, lit candles).
• Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
• To avoid hearing damage, do not listen for extended periods at high volume.
• Do not expose batteries to extreme heat sources such as direct sunlight or open flames.
• The ideal operating temperature for this product and its accessories is between 5°C and 35°C (41°F - 95°F).
• The adapter should be installed near the device and be easily accessible.
• Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

Proper Disposal Instructions

The symbol on the product or its packaging indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent harm to the environment or human health from uncontrolled waste disposal, please separate this from other waste types and recycle it responsibly to promote the sustainable reuse of material resources.

Waste Electrical & Electronic Equipment: Household users should contact their retailer or local government office for details on environmentally safe recycling. Business users should contact their suppliers.

Regulatory Compliance

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If interference occurs, users are encouraged to correct it by reorienting/relocating the receiving antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a dealer/technician.

This equipment complies with FCC radiation exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Warnings (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation.

The device meets exemption from routine evaluation limits in section 2.5 of RSS 102 and complies with RSS-102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Declaration of Conformity

Manufacturer: Ultimea Technology (Shenzhen) Limited

Address: 20th Floor, Building 4, Tianan Cloud Park, Bantian St., Longgang District Shenzhen, China 518000

Product: Ultimea Nova S90 7.1.4 Channel Dolby Atmos Soundbar

Model No.: U4420

This product conforms to the essential requirements of the Council Directive on the Approximation of the laws of the Member States relating to RED Directive (2014/53/EU) & RoHS (2011/65/EU). The following standards were applied:

• EN 55032:2015/A1:2020
• EN 55035:2017/A11:2020
• EN IEC 61000-3-2:2019/A1:2021
• EN 61000-3-3:2013/A2:2021
• ETSI EN 301 489-1 V2.2.3 (2019-11)
• ETSI EN 301 489-17 V3.2.4 (2020-09)
• ETSI EN 300 328 V2.2.2 (2019-07)
• EN 50663: 2017
• EN IEC 62368-1:2020+A11:2020
• IEC 62321-3-1:2013
• IEC 62321-4:2013+A1:2017
• IEC 62321-5:2013
• IEC 62321-6:2015
• IEC 62321-7-1:2015
• IEC 62321-7-2:2017
• IEC 62321-8:2017

Full Name: Yoyo Yu

Position: Approbation Manager

Place/Date: Shenzhen, China / Apr 19-2024

Trade Marks

Dolby Atmos: Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2021 Dolby Laboratories. All rights reserved.

Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of these marks by Ultimea Technology (Shenzhen) Limited is under license. Other trademarks and trade names are those of their respective owners.

HDMI: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress, and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Support and Contact Information

EC REP: Ultimea GmbH, Buchenring 57, 22359 Hamburg, Germany

UK REP: UK CROSSBORDER LIMITED, 7 Bell Yard London WC2A 2JR, UK United Kingdom

For support, please reach out to the Ultimea service team:

• Phone (US): +1 888-598-8875 (Mon-Fri 9am-5pm PST)
• Phone (EU): +49 89-628-25828 (Mon-Fri 9am-5pm CET)
• Email: support@ultimea.com
• Website: support.ultimea.com

Follow Ultimea on social media: @ultimea_official [Facebook] [Instagram] [YouTube] [TikTok]