ULTIMEA Nova S90 Dolby Atmos Soundbar User Manual

Introduction

This document serves as the user manual for the ULTIMEA Nova S90 soundbar. It provides comprehensive instructions for setup, operation, and features, ensuring an optimal audio experience with technologies like Dolby Atmos and seamless connectivity via HDMI and Bluetooth.

Getting Started

Unpack your ULTIMEA Nova S90 soundbar and ensure all components are present. Refer to the quick start guide for initial physical setup.

Connecting the Subwoofer

The subwoofer is designed for wireless pairing. Once powered on, it will attempt to connect automatically to the soundbar. A solid white LED indicator on the subwoofer signifies a successful pairing. If pairing fails, consult the troubleshooting section.

Note: Ensure the subwoofer is within range of the soundbar for a stable connection.

Audio Features

Dolby Atmos

Experience immersive, three-dimensional sound with Dolby Atmos support. For Dolby Atmos playback, ensure your audio source (e.g., streaming device, Blu-ray player) and connected TV are configured to output Dolby Atmos signals via HDMI. The soundbar will automatically detect and process the Dolby Atmos stream.

HDMI Connectivity

Connect your TV and other audio sources to the soundbar using HDMI cables. Utilize the HDMI ARC (Audio Return Channel) port on your TV and the soundbar for simplified audio return from the TV. Ensure HDMI CEC (Consumer Electronics Control) is enabled on your TV for convenient control.

Bluetooth Connectivity

To connect a Bluetooth-enabled device (e.g., smartphone, tablet):

1. Press the "Bluetooth" button on the remote control or the soundbar unit to enter pairing mode.
2. On your device, search for available Bluetooth devices and select "ULTIMEA Nova S90" from the list.
3. Once paired, the soundbar will indicate a successful connection, and audio will play through the soundbar.

Tip: For the best Bluetooth audio quality, ensure your device is close to the soundbar and that there are no significant obstructions.

Audio Output Settings

When configuring audio output settings on your connected devices or TV, select "PCM" or "Bitstream" as appropriate for your content and desired audio processing. The soundbar supports various audio formats.

Maintenance and Care

Keep the soundbar and subwoofer clean by wiping them with a soft, dry cloth. Avoid using liquids or abrasive cleaners. Ensure ventilation slots are not blocked.

Troubleshooting

Subwoofer Not Connecting:

• Ensure both the soundbar and subwoofer are powered on.
• Check that the subwoofer is within the recommended wireless range.
• Try restarting both the soundbar and the subwoofer.
• If issues persist, perform a manual pairing process as described in the advanced settings section (if applicable).

No Sound:

• Verify that the correct input source is selected on the soundbar.
• Check volume levels on both the soundbar and the connected source device.
• Ensure audio cables are securely connected.
• Confirm that the correct audio output settings are selected on your TV or source device.

Specifications

Model: Nova S90

Brand: ULTIMEA

Audio Technologies: Dolby Atmos, DTS (if applicable)

Connectivity: HDMI (ARC), Bluetooth, Optical, AUX

Power Requirements: [Specify Voltage/Frequency]

Dimensions: [Specify Dimensions]

Weight: [Specify Weight]