Honeywell Bi-Spectrum Bullet VGA Cameras

Product Models

This guide covers the following Honeywell Bi-Spectrum Bullet VGA Camera models:

• HC60TB4R1VT09
• HC60TB4R4VT15
• HC60TB4R2VT25
• HC60TB4R2VT35
• HC60TB4R2VT50

Installation Steps

Step 1: Prepare Tools and Camera

Gather necessary tools, including T10 and T15 screwdrivers. Prepare the camera unit, ensuring a Micro SD card slot and reset button are accessible.

Step 2: Drill Mounting Holes

Mark and drill mounting holes on the installation surface. Use a 6mm drill bit for pilot holes and a 25mm drill bit for wall anchors if required.

Step 3: Mount Camera Bracket

Secure the camera's mounting bracket to the prepared surface using appropriate screws.

Step 4: Connect Cables

Connect all necessary cables to the camera. Refer to the wiring table below for detailed connections.

Step 5: Finalize Installation

Mount the camera onto the installed bracket and make any necessary adjustments for optimal viewing angle.

Compatible Accessories

Honeywell offers various compatible accessories for installation. Ensure accessories are purchased according to your needs and installed using the provided screws.

Examples of compatible accessories include:

• Mounting brackets: HA35PLM01, HA35CNM01, HA35JCBHBB
• Mounting accessories: HA35CLM01, HA35CLM02, HA35PCM04B
• Camera mounts: HAS1PTD, HAS1PTDP

Software and Configuration

1. Visit the Honeywell website: https://myhoneywellbuildingsuniversity.com
2. Navigate to the Download Center.
3. Download the "Unified Tool".
4. Launch the Honeywell Unified Tool and use the Camera Manager for configuration.
5. When logging in, set a strong password (8+ characters, mix of cases, numbers, symbols). It is recommended to use HTTPS only for secure communication.

Note: Chrome version 91 or later is recommended. The camera defaults to DHCP/APIPA IP address assignment. Users can choose to keep this default or assign a static IP address.

Connecting to Legacy NVR: If connecting to a legacy NVR that does not support HTTPS, change the camera's mode to HTTP & HTTPS.

Scenarios:

• Scenario A (Factory Default): Follow steps 1a-5a.
• Scenario B (Already Initialized): Follow steps 1b-5b. Ensure selected devices are authenticated.

Cautions and Warnings

CAUTION: RISK OF ELECTRIC SHOCK

DO NOT OPEN. Refer servicing to qualified service personnel. This symbol [⚡] indicates dangerous voltage.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

This symbol [?] indicates important operating and maintenance instructions.

WARNING: Use only certified LPS or Class 2 power adapters. Power over Ethernet (PoE) must meet IEEE 802.3af standard. Consult Honeywell for recommended adapters.

CAUTION: Invisible LED radiation (850 nm). Avoid exposure to beam.

Important Safeguards

• Read and keep these instructions.
• Ensure installation area can safely support the camera's weight.
• Do not aim the camera at bright light sources for extended periods. Avoid unstable light sources, fluorescent lamps, or reflective objects.
• Do not touch the camera lens.
• Do not drop the camera or subject it to physical shock.
• Use mild detergents for cleaning.
• Operate within temperature range: -40°F to 149°F (-40°C to 65°C).
• Avoid operating near strong electromagnetic radiation sources (e.g., radio/TV transmitters).
• Connect only to PoE networks, not outside plant networks.
• If using a power adapter, ensure it is properly grounded.
• Installation and dismantling should be performed by qualified technicians only.
• Cut power before any repair or installation work.

Mounting and Environmental Considerations

The product supports ceiling or wall mounting. For wall mounting, ensure the Cable Gland faces downwards and the product is installed at least 3 meters high. Install the camera at least 10 centimeters away from building eaves.

Contact an authorized Honeywell distributor for accessories like Cable Glands and cables.

If using a Class I adapter or switch for power, ensure the power cord is firmly plugged in and the main earth connection is confirmed.

Regulatory Statements

FCC Statement of Compliance: This equipment complies with Class A digital device limits under Part 15 of FCC Rules, designed for reasonable protection against harmful interference. Users are encouraged to correct interference by reorienting antennas, increasing separation, or connecting to a different circuit. Modifications not expressly approved may void user authority. This apparatus complies with Canadian ICES-003.

Manufacturer's Declaration of Conformance:

• North America: Conforms to UL 62368-1 and CSA C22.2 No. 62368-1.
• Europe: Compliant with EU Directives on Restriction of Hazardous Substances (RoHS 3) and EMC Directive. Conforms to standards EN 55032 (emissions), EN 50130-4 (immunity), and EN 62368-1 (safety).

Waste Electrical and Electronic Equipment (WEEE)

Correct Disposal: In the European Union and other countries with separate collection systems, this product should be disposed of according to local laws, regulations, and procedures at the end of its useful life.

Check Local Waste Guidelines: Components require separate waste collection. Consult local guidelines for sorting rules.

Data Privacy and Patents

This product may store personal data, protected by GDPR (2016/679) in Europe. Data subjects have rights regarding their personal data. Consult the GDPR website for details.

This product is covered by patents listed at patentlist.hevcadvance.com.

Contact Information and Copyright

For support, visit buildings.honeywell.com/security or call +1 800 323 4576 (North America only).

© 2025 Honeywell International Inc. All rights reserved. Information is subject to change without notice.