Honeywell Bi-Spectrum Ball Cameras

Installation Steps

1. Mounting the Camera: Follow the diagrams for ceiling or wall mounting. Ensure the mounting surface can support the camera's weight. Use appropriate screws provided in the accessory box.
2. Connecting Cables: Connect the network cable (RJ45) and power cables (DC 12V) as indicated in the diagrams. Refer to the wiring table for specific pinouts (Network, Power, Alarm, RS485, Audio).
3. Optional Accessories: If using mounting accessories like HA35PLM01, HA35CNM01, HA60WLMB1, HA35PMC02, HA35CLM01, HA35CLM02, or HA35JCBHA1, follow the specific installation diagrams provided.
4. Initial Setup and Configuration:
• Access the camera via its IP address. The camera defaults to DHCP/APIPA.
• Use the Honeywell Unified Tool for initial setup, including password configuration and network settings.
• For legacy NVRs that do not support HTTPS, change the camera's mode to HTTP & HTTPS.
• Ensure the camera is authenticated, especially when connecting to NVRs.

Cautions and Warnings

• Electrical Safety: Use only certified LPS or Class 2 power adapters or PoE compliant with IEEE 802.3af. Ensure proper grounding if using a power adapter.
• Operating Environment: Avoid extreme temperatures (-40°F to 149°F / -40°C to 65°C), high humidity, dust, and strong electromagnetic radiation.
• Installation Precautions: Install at least 10 cm away from building eaves. If wall-mounted, ensure the Cable Gland faces down and the product is above 3 meters. Do not touch the camera lens. Avoid aiming the camera at bright light sources for extended periods.
• Servicing: Refer servicing to qualified personnel. Cut off power before repair or installation.
• Cleaning: Do not use strong or abrasive detergents.

Regulatory Information

• FCC Compliance: Complies with Class A digital device limits to provide reasonable protection against harmful interference.
• Manufacturer's Declaration of Conformance (Europe): Compliant with RoHS 3 (2015/863), EMC Directive (2014/30/EU), and electrical safety standards.
• WEEE Disposal: Dispose of the product according to local laws and regulations for electronic waste.
• Data Protection: Product may store personal data, protected by GDPR. Users have rights regarding data usage and distribution.

Contact Information

For accessories and support, contact authorized Honeywell distributors.

Honeywell Buildings: https://buildings.honeywell.com/security

North America Support: +1 800 323 4576