Security | Honeywell Building Technologies
Home - Access Advance
myhoneywellbuildingsuniversity.com
Installation Guide for Honeywell models including: HC35W25R3-H, HA35CLM01, HA35CLM02, HC35W25R3-H Series IR Fixed Micro Dome Camera, HC35W25R3-H Series, IR Fixed Micro Dome Camera, Fixed Micro Dome Camera, Micro Dome Camera, Dome Camera
Honeywell HC35W25R3-H in/outdoor micro dome IP camera
File Info : application/pdf, 6 Pages, 2.91MB
DocumentDocumentIR Fixed Micro Dome Camera HDMI HC35W25R3-H
Quick Installation Guide
1
T10
x2
x2
x1
x1
x1
2
3
6mm
25mm
OR
6mm
25mm
4
5
7
DC 12V
Network RJ45
Power
DC12V
Micro HDMI Female
6
8
IP66
X1 X1
9
HA35CLM01 + HA35CLM02+HA35PCM04B+Camera
HA35PLMO1 or HA35CNM01+HA35JCBM01+Camera
OR
HA35PLM01
HA35CNM01
HA35CLM01
HA35CLM02
10
HA35JCBMO1
HA35PCMO4B
HA35PLMO1 or HA35CNM01+HA60WLMB1+HA35PCMO4B +Camera
OR
HA35PLM01
HA35CNM01
HA60WLMB1
HA35PCMO4B
search
1
Web sitehttps://myhoneywellbuildingsuniversity.com SelectDownload Center Download Unified Tool
2
2x
3
HC35W25R3-H
1x
4
or
HC35W25R3-H
Note Chrome 91 (or later) is supported. The camera comes with the IP address set as DHCP/APIPA by default. It is not required to switch to a static IP address. Users may choose to keep the default DHCP/APIPA assigned IP address.
Connecting to Legacy NVR which doesn't Support HTTPS
Please change the camera to HTTP & HTTPS mode if you connect it to legacy NVR which doesn't support HTTPS mode.
Scenario A : Devices are in factory default mode. Please follow the 1a~5a steps below.
HC35W25R3-H
1a
2a
1x
3a 4a
5a
Scenario B : Devices are already been initialized. Please follow the 1b~5b steps below.
Note : Please make sure the selected devices are authenticated.
HC35W25R3-H
1x 1b
2b
3b 4b
5b
Cautions and Warnings
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THE UNIT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS ACCOMPANY THIS UNIT.
WARNING
To ensure compliance with electrical safety standards,Local Certified / CSA Certified / UL Listed LPS or Class 2 power adapters are required. Power over Ethernet (PoE) shall be provided by listed Information Technology Equipment meeting the IEEE 802.3af PoE standard. The PoE is not intended to be connected to exposed (outside plant) networks. Consult Honeywell for the recommended adapter.
CAUTION
Invisible LED radiation (850 nm). Avoid exposure to beam.
Important Safeguards
· Read and keep these instructions. · Please ensure that your installation area can safely support
the weight of the camera. · Do not aim the camera toward a bright light source for
extended periods to prevent damage to the imager. Avoid operating the unit under or close to unstable light sources (may cause flickering), or close to fluorescent lamps or objects reflecting light. · Do not touch the camera lens. · Do not drop the camera or subject it to physical shock. · Do not use a strong or abrasive detergent when cleaning the camera. · Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments, where the operating temperature is outside the recommended range of -40°F to 140°F (-40°C to 60°C). · Avoid operating the unit close to sources of powerful electromagnetic radiation, such as radio or TV transmitters. · The product is only to be connected to PoE network without routing to outside plant. · If powered by a power adapter, the adapter should be properly grounded. (Consult Honeywell for the recommended adapter). · Installation and dismantling should be performed only by qualified and experienced technicians. · Make sure the power is cut off before the product is being repaired or installed.
· The product can be ceiling or wall mounted. When wall mounted, the Cable Gland will face down and make sure the height of the product is above 3 meters.
· Please contact the authorized distributor of Honeywell for related accessories (Cable Gland, Cable, etc.) for purchase and installation.
· The camera should be installed at least 10 centimeters away from the eave of a building.
· If a Class I adapter or switch is used to provided power, be sure that the power cord is firmly plugged into the socket and confirm the main earth connection.
Manufacturer's Declaration of Conformance
Europe The manufacturer declares that the equipment supplied with this guide is compliant with the European Parliament and Council Directive on the Restrictions of the use of certain hazardous substances in electrical and electronic equipment (2011/65/EU) as Amended by RoHS 3 (2015/863), and the essential requirements of the EMC Directive (2014/30/EU), conforming to the requirements of standards EN 55032 for emissions, EN 50130-4 for immunity, and EN 62368-1 for electrical equipment safety.
Waste Electrical and Electronic Equipment (WEEE)
Correct Disposal of this Product (applicable in the European Union and other European countries with separate collection systems).
This product should be disposed of, at the end of its useful life, as per applicable local laws, regulations, and procedures.
Check Local Waste Guidelines
Components of this product require separate waste collection. Check local waste guidelines for sorting rules.
Covered by one or more claims of the patents listed at patentlist. hevcadvance.com Please be aware that this product can store personal data. Personal data is protected by the General Data Protection Regulation (2016/679) in Europe and there fore the owners of personal data have obtained certain rights thanks to this regulation. We strongly advise you to be fully aware of these owner ("data subjects") rights as well as which limitations you have to obey regarding the use and distribution of this data. Further details can be found on the GDPR website of the EU
buildings.honeywell.com/security +1 800 323 4576 (North America only) Document 800-35QI10 Rev C-11/2024 © 2024 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes. For patent information, see https://buildings.honeywell. com/en-us/company/patent.