Product Overview
This document provides installation instructions for the UNICOL CT1 and CT2 truss clamps. These clamps are designed for securely mounting equipment to standard truss structures.
Key Specifications
- Models: CT1, CT2
- Maximum Load Capacity: 120kg
- Intended Use: Indoor applications
- Required Tool: 3/16th Allen Key
- Recommended Installers: 1 qualified person
Installation Summary
The CT1 and CT2 clamps come fully assembled. Installation involves placing the clamp over the truss, tightening the wing nut securely, and then inserting and securing the column (sold separately) using the provided through-bolt and grub screws.
The CT2 model features an integrated safety hook for enhanced security.
Important Safety Warnings
Users must carefully inspect the product for any damage before assembly. Ensure the supporting surface can withstand five times the combined load. Never exceed the maximum load capacity. Installation should be performed by qualified tradespersons, with assistance or lifting equipment used for positioning products. Avoid pinch points and do not tamper with spring-loaded parts.
Support and Further Information
For support, please contact UNICOL via phone at +44 (0)1865 767676 or email at sales@unicol.com. Additional installation resources can be found at unicol.com/instructions.
