Instruction Manual

Thank You

For purchasing this product. To achieve the perfect hidden-line effect, we use severely thin aviation-grade wire with high tension and pressure tolerance. Due to its delicate nature, exercise caution to avoid cutting the wire, as it may be susceptible to shearing during installation. Always ensure brick pieces are not pressed down directly onto the wire.

Let's Get Started

If you encounter any challenges during installation, please feel free to contact us via email at support@gameofbricks.eu. Game of Bricks offers 2 years of free light kit maintenance.

Step 1 (Bag 1)

Prepare the components from Bag 1. Attach the thin wires with LEDs to the small, flat brick elements.

Step 2 (Bag 2)

Take the components from Bag 2. Route the wires through the red Tokyo Tower structure and connect the LEDs to their designated points.

Step 3 (Bag 3)

Use the parts from Bag 3. Connect the wires to the colorful brick assemblies. Integrate these assemblies into the base of the Tokyo model, carefully managing the wires.

Step 4 (Bag 4)

From Bag 4, connect the wires to additional building elements. Place these components into the base section of the Tokyo model.

Step 5 (Bag 5)

Utilize the parts from Bag 5. Connect the wires to the white tower structures and integrate them into the model, ensuring proper wire placement.

Step 6 (Bag 6)

Use the components from Bag 6. Connect the remaining wires to the model, including the final LED strips. Connect the USB power cable to the power source.