Light Kit for Infinity Gauntlet 76191

Instruction Manual

Thank You

Thank you for purchasing this product. Game of Bricks uses severely thin aviation-grade wire with high tension and pressure tolerance for a perfect hidden-line effect. Please be careful not to cut through the wire, as it might be susceptible to shearing during installation. Always ensure brick pieces are not pressed down on the wire.

Getting Started

If you encounter any challenges, please feel free to reach out via support@gameofbricks.eu. Game of Bricks offers 2 years of free light kit maintenance.

Step 1 (Bag 1)

This step involves components from Bag 1. A plastic bag labeled '1' contains a thin wire. The wire is shown being connected to the LEGO Infinity Gauntlet model. The model has several colored light bricks (red, blue, yellow, green) installed in the fingers.

Step 2 (Bag 2)

This step uses components from Bag 2. A plastic bag labeled '2' contains a thin wire. The wire is connected to the Infinity Gauntlet model. Additional light bricks (orange, red, blue, yellow) are shown, and the wire is routed through the gauntlet's structure.

Step 3 (Bag 3)

This step involves components from Bag 3. A plastic bag labeled '3' contains a thin wire. The wire is connected to the Infinity Gauntlet model near the wrist area. A green light brick is visible, and the internal structure of the gauntlet is exposed.

Step 4 (Bag 4)

This step uses components from Bag 4, which includes multiple thin wires. These wires are being connected and routed through the fingers and palm of the gauntlet. The model has red, blue, yellow, and green light bricks installed. Small LEGO pieces are shown for placement.

Step 5 (Bag 5)

This step involves components from Bag 5, containing a thin wire and a small circuit board. The wire is connected to the Infinity Gauntlet model. The internal base of the gauntlet is shown, with wires being routed and connected.

Step 6 - Classic Version

The following instructions are for the Classic Version only. If you ordered the Standard Version, please skip to Step 7.

Step 6 (Bag 6) - Classic Version

This step uses components from Bag 6, which includes a USB power connector and a circuit board. Wires are connected to the internal components. The process involves connecting the light kit to a power source via the USB connector. Multiple connection points on a circuit board are visible.

Step 7 - Standard Version

The following instructions are for the Standard Version only.

Step 7 (Bag 7) - Standard Version

This step involves components from Bag 7, containing thin wires and small circuit boards. Wires are routed and connected to the Infinity Gauntlet model. The model is partially assembled. The process involves connecting the lights to the main board and routing wires. A USB connector is shown. The text "NR Sensor Switch can be Installed in Multi-position" is visible on a component, along with "LEGO INFINITY SAGA INFINITY GAUNTLET".

Final Connection

Connect the light kit to the battery box. Your installation is now complete.

If you choose to use an alternative power source, please ensure the maximum voltage is 6V.

	Game of Bricks Light Kit for LEGO Classic TV Series Batman Cowl 76238 Instructions Detailed instructions for installing the Game of Bricks light kit for the LEGO Classic TV Series Batman Cowl set 76238. Enhance your LEGO model with LED lighting and bring the iconic cowl to life.
	Game of Bricks Light Kit for LEGO Singapore 21057 - Instruction Manual Step-by-step guide for installing the Game of Bricks LED lighting kit for the LEGO Architecture Singapore 21057 set. Learn how to connect wires and LEDs for a stunning illuminated display.
	Game of Bricks Light Kit for 1970 Ferrari 512 M 76906 Instruction Manual Detailed instructions for installing the Game of Bricks LED light kit for the LEGO 1970 Ferrari 512 M (76906) set. Learn how to connect the wires and illuminate your model.
	Game of Bricks Light Kit for LEGO The Battle of Hogwarts 76415 Instructions Step-by-step instructions for installing the Game of Bricks light kit for the LEGO The Battle of Hogwarts 76415 set. Learn how to illuminate your Hogwarts model.
	Game of Bricks Light Kit for Mos Espa Podrace Diorama 75380 Instruction Manual Step-by-step instructions for installing the Game of Bricks LED light kit for the LEGO Star Wars Mos Espa Podrace Diorama 75380. Learn how to enhance your display with hidden wiring and lighting.
	Game of Bricks Light Kit for Heihei 43272 Instruction Manual Step-by-step instructions for installing the Game of Bricks light kit for the Heihei 43272 model. The manual details wire routing and component placement across multiple bags, concluding with connection to a power source.
	Game of Bricks Light Kit for Fountain Garden 10359 Instruction Manual Detailed instructions for installing the Game of Bricks LED light kit for the LEGO Fountain Garden 10359 set. This guide covers component identification, wiring, and connection for both Classic and Remote versions, ensuring a perfect hidden-line effect.
	Game of Bricks Light Kit for Snowglobe 40223 Instruction Manual Step-by-step instructions for installing the Game of Bricks light kit for the LEGO Snowglobe 40223 set. Learn how to safely connect wires and illuminate your model.