Thank You
Thank you for purchasing this product. To achieve a perfect hidden-line effect, Game of Bricks uses thin aviation-grade wire with high tension and pressure tolerance. However, due to its thin nature, be careful not to cut through it as it might be susceptible to shearing during installation. Always ensure brick pieces are not pressed down directly onto the wire.
Let's Get Started
If you face any challenges during installation, please feel free to reach out via support@gameofbricks.eu. Game of Bricks offers 2 years of free light kit maintenance.
Step 1 (Bag 1)
This step involves the initial assembly of the main Hogwarts structure and the placement of lighting components from Bag 1. The bag contains LED strips and thin wires with small LED bulbs.
- Route the thin wires through the designated brick channels in the base and lower sections of the model.
- Attach LED strips to the underside of brick plates or along edges where illumination is desired, such as around the main entrance or lower facade.
- Place small LED bulbs near minifigure locations or where torches are mounted to enhance these features.
- Focus on illuminating the torches and the exterior details of the building's lower levels.
Step 2 (Bag 2)
This step focuses on assembling and lighting the tower sections of the Hogwarts model using components from Bag 2.
- Thread wires through the internal structures of the tower sections.
- Integrate LED strips into the walls or floors of these towers to provide internal and external lighting.
- Ensure wires are neatly routed to avoid obstructing further building steps.
Step 3 (Bag 3)
Continue with the assembly of building sections and integration of lighting from Bag 3.
- Connect wires to previously placed components or new LED strips.
- Position LED strips to illuminate specific architectural features or interior spaces within the model.
- Carefully place light strips into detailed sections of the building, ensuring they are secure and wires are hidden.
Step 4 (Bag 4)
This step involves lighting a specific accessory or character element using components from Bag 4.
- Prepare the accessory, such as the red spiky weapon shown in the visuals.
- Attach a small LED to the accessory or its handle.
- Route the wire from the LED discreetly.
Step 5 (Bag 5)
This step includes lighting another accessory or character element and connecting the main power source using components from Bag 5.
- Prepare the accessory, such as the green spiky weapon.
- Attach a small LED to this accessory or its handle and route the wire.
- Connect the main power source, which is a USB connector, to the wiring harness.
- Attach the final LED strip, potentially for a display base or feature.
Final Connection
Connect the assembled light kit to the battery box to complete the installation. If you intend to use an alternative power source, please ensure that its maximum voltage does not exceed 6V.
