Harbor Breeze LED Path Lights Installation Guide

Product Information

Harbor Breeze and its logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Item #: 5488933

Model #: ZDL1193-LRGB

LED Path Lights / Luces para Senderos LED

Printed in China

Preparation and Assembly

Before beginning assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not attempt to assemble if any part is missing or damaged.

Estimated Assembly Time: 10 minutes

Tools Required: None

For questions, problems, or missing parts, contact Harbor Breeze customer support at 888-251-1003 (8 a.m. - 8 p.m., EST, Monday - Sunday) or ascs@lowes.com.

For more information, visit Lowes.com and refer to the Guides & Documents tab on the product page.

Troubleshooting

Problem: The light does not turn on at night.

• Possible Cause: The battery ran out.
• Corrective Action: Shine light on the solar panel.

Care and Maintenance

Clean the lens, lamp head, and lamp stand regularly with a non-abrasive cleaner.

Warranty

This fixture is warranted to be free from defects in materials and workmanship for one (1) year from the date of original purchase. To obtain a Return Authorization number and further instructions, call 888-251-1003. The manufacturer is liable for the replacement of defective items.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

Warnings:

• Keep the lamp away from materials that may burn.
• Do not touch hot lenses, guards, or fixture housings.
• Do not touch the LED at any time, as this may cause damage to the fixture.

Precautions:

• This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• Users are encouraged to try to correct interference by: reorienting or relocating the receiving antenna; increasing the separation between the equipment and receiver; connecting the equipment into an outlet on a circuit different from that to which the receiver is connected; or consulting the dealer or an experienced radio/TV technician.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
• This product is not a toy and must not be operated by children.
• Do not submerge in water, as the product can be damaged.

Installation Overview

The path lights offer 7 color modes (warm white, red, green, blue, orange, purple, and smooth rotating) plus an OFF setting.

Package Contents:

• A: LED Path Light x 1
• B: Ground Stake x 1

Installation Steps:

1. Assemble the light fixture and stake.
2. Remove the protective film from the solar panel.
3. Insert the stake into the ground at the desired location.
4. Connect the light fixture to the stake.
5. Ensure the solar panel is exposed to direct sunlight.