Product Overview
This document details the Nylex 22700 Litre Round water tank, a robust and certified polyethylene tank designed for water storage.
Specifications
Dimensions
| Width/Diameter | 3500mm |
| Inlet Height | 2700mm |
| Total Height | 3000mm |
| Weight (approx.) | 400kg |
Note: Dimensions can vary slightly due to shrinkage variations. All dimensions are approximate.
Standard Supply
The tank is supplied standard with:
- 1 x 400mm inlet strainer
- 1 x 90mm overflow cap
- 1 x 40mm brass outlet
- 1 x 40mm brass gate valve
Standard Fitout Details
The standard fitout configuration is as follows:
| Inlet | @ 12 o'clock - 400mm inlet strainer |
| Overflow | @ 6 o'clock - 90mm overflow cap (molded into tank) |
| Outlet | @ 12 o'clock - 40mm brass outlet and brass gate valve |
Note: When no specific fitout is nominated, the standard fitout will be supplied. A bucket tap is not included with the tank.
Fitout Options
Additional fitout options are available:
- Inlet is always positioned at 12 o'clock.
- Overflow can be located in different positions at an additional charge.
- Outlet can be placed in any location on the tank and fitted on site.
- Tanks are available in any standard COLORBOND® roofing colours.
Certifications and Quality Standards
Nylex Tanks is managed and certified to the ISO9001:2008 international Quality Management Systems standard. The tanks are manufactured and certified to the Australian Polyethylene tank standard AS/NZS4766:2006.
All Nylex tanks are manufactured in Australia using UV stabilised Polyethylene, complying with AS/NZS 4020 and AS/NZS 2070.
Certifications:
- Quality Management System: ISO 9001:2008 (Certified by SAI GLOBAL, Certificate No. QEC24048)
- Product Standard: Australian Standard AS/NZS 4766:2006 (Certified by SAI GLOBAL, Certificate No. SMKP25513)
Contact and Company Information
Nylex Tanks
ABN: 84 661 692 793
Address: 34 Gap Road (P.O. Box 2475), Sunbury Victoria 3429
Phone: 1300 664 148
Fax: 1300 400 049
Website: nylextanks.com.au
