Hose Hanger
Product Code: 50135422
Product Overview
This document provides instructions for the Nylex Hose Hanger, designed for residential watering applications. It guides users through installation, usage, and warranty information.
The Nylex Hose Hanger is a durable accessory for organizing garden hoses, featuring a design that can also store hose fittings.
Important Information
⚠️ Caution
- Before use and installation, read the entire manual.
- This hose hanger is for residential watering applications only; not for commercial use.
- Ensure the Hose Hanger is securely attached to the wall before use.
- Regularly inspect the bracket for signs of wear.
- Avoid exceeding the recommended length capacity of the hanger.
⚠️ Warning
- Ensure there are no live electrical wires or plumbing in the wall at the location you are drilling.
- If your wall's plywood cladding is thicker than 12mm, you can directly mount the hanger to the wall.
- Ensure the wall or surface can support the weight of the hose when fully loaded.
What You Will Need
- Electric Drill [drill]
- Drill Bit (Appropriately sized to suit your wall substrate) [drill bit]
- Screws (Appropriately sized to suit your wall substrate) [screws]
- Pencil [pencil]
- Tape Measure [tape measure]
- Phillips head screwdriver [phillips screwdriver]
Installation Guide
Step 1: Choose the location
It is recommended to install the hanger on a flat surface about 120cm (approx. 1.2m) off the ground. This height can be adjusted based on personal preference.
[Illustration showing the recommended installation height for the hose hanger on a wall, approximately 1.2 meters from the ground.]
Step 2: Mark the position
Measure and mark 156mm distance, or hold the hose hanger against your chosen surface and use a pencil to mark the desired location of the screw holes.
Nylexpert Tip: Installing the hose hanger in a position out of direct sunlight and elements will help extend the hose life.
[Illustration demonstrating how to mark screw hole positions on a wall using the hose hanger as a template, with a measurement of 156mm indicated.]
Step 3: Secure the fasteners
Drill holes at the marked points and screw in the appropriate fasteners for your wall with a screwdriver. (Fasteners and tools not included).
[Illustration of drilling holes into a wall and inserting screws.]
Step 4: Install the Hanger
Align the holes of the hanger with the exposed head of the screws and slide down into place. Now that the hose hanger is securely mounted, it is ready for use.
Nylexpert Tip: Coiling your hose neatly before stowing on the hanger will help to prevent tangling of the hose.
[Illustration showing the hose hanger being attached to screws on the wall.]
Step 5: Store your accessories
Disconnect your fittings or accessories. Any accessories with a male end can be inserted into the slots on the back of the hanger. Other accessories can be stowed inside the shelf compartment.
[Illustration depicting hose fittings with male ends being stored in the slots on the back of the Nylex Hose Hanger, and a coiled hose stored in the shelf compartment.]
Warranty Information
AMES Australasia Pty Ltd (AMES) guarantees that this product will be free from defects in workmanship and materials for 2 years from the date of purchase. If such a defect becomes evident during that period, AMES will, at its option, either repair, replace or refund the product.
In the event of such a defect, the product should be returned to the place of purchase (together with proof of purchase and the original packaging) at the address below. Any handling and transportation costs (and other expenses incurred in claiming under this guarantee) are not covered by this guarantee and will not be borne by AMES.
The obligation of AMES under this guarantee is limited to the circumstances set out above and is subject to: the customer being able to evidence the acquisition of the product, the purchase price paid for the product and the relevant defect in materials or workmanship; the product not having been altered, tampered with or otherwise dealt with by any person in a manner other than as intended in respect of the relevant product; and the product not having been used or applied in a manner that is contrary to customary usage or application for the relevant product or contrary to any stated instructions or specifications of AMES.
In addition to other rights and remedies that may be available under law, our goods come with guarantees that cannot be excluded under the Australian Consumer Law (for consumers in Australia) and the Consumer Guarantees Act (for consumers in NZ). If you are a consumer in Australia, you are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you are a consumer in New Zealand, we will comply with our obligations to you under the Consumer Guarantees Act.
Contact Us
For further information contact AMES Australasia:
- Email: nylex@amesau.com
- Australia Free Call: 1300 381 559
- New Zealand: 0800 447 144
AMES Australasia
ABN 89 169 427 061
Level 1, 660 Doncaster Road,
Doncaster, Victoria, 3108, Australia.
Follow us on: [facebook] [instagram]
Website: www.nylex.com.au
Scan for user guide: [link to user guide]
