LILLVIKEN Water Trap and Strainer Installation

Tools Required

The following tools may be needed for installation:

• Screwdriver
• Scissors
• Hacksaw
• Measuring tape

Parts Included

Ensure you have all the necessary parts before beginning:

• 1x Main trap body (148962)
• 1x Strainer body (195565)
• 1x Threaded pipe
• 1x Nut (148977)
• 1x Screw (148975)

Installation Steps

1. Step 1: Assemble the trap body

   Connect the main trap body components. Ensure a 'CLICK!' sound is heard to confirm proper connection.

2. Step 2: Attach trap to sink

   Insert the assembled trap into the sink's drain opening.

3. Step 3: Secure the trap

   From underneath the sink, align the trap with the drain opening and push it upwards. A magnified view shows the correct alignment with the sink's rim.

4. Step 4: Cut the pipe (if necessary)

   Use a hacksaw to cut the flexible pipe to the desired length. Ensure clean cuts for a proper seal.

5. Step 5: Connect the flexible pipe

   Attach the flexible pipe to the trap body using the provided screw and nut. Tighten securely.

6. Step 6: Install the strainer

   Insert the strainer into the sink's drain opening. Use a screwdriver to tighten the retaining nut from underneath the sink. Ensure the rubber seal is properly seated.

7. Step 7: Final assembly

   The trap and strainer are now installed in the sink.

8. Step 8: Connect to waste pipe

   Connect the flexible pipe to the main waste pipe. Use the provided collar to secure the connection.

9. Step 9: Secure the pipe

   Ensure the flexible pipe is properly positioned and secured to prevent kinks or strain.

10. Step 10: Connect outlet

    Attach the outlet fitting to the end of the flexible pipe.

11. Step 11: Connect to drain

    Connect the flexible pipe to the household drain system.

12. Step 12: Final pipe connections

    Ensure all pipe connections are secure and properly aligned.

13. Step 13: Secure strainer assembly

    Ensure the strainer assembly is correctly installed and locked in place.

14. Step 14: Wall mounting (optional)

    Use scissors to cut a piece of string or cable. Attach it to the wall brackets to secure the pipework.

15. Step 15: Secure pipework

    Use the provided brackets and screws to secure the flexible pipe to the wall or cabinet for stability.

16. Step 16: Insert strainer

    Place the strainer into the sink opening.

17. Step 17: Test for leaks

    Run water into the sink and check all connections for leaks. Ensure water drains correctly and the trap is sealed.

Maintenance

After a period of use, check all connections to ensure they are tight and properly sealed.