Dickert OSR-868A1KL00 1-Channel Outdoor Hand Transmitter
Model: OSR-868A1KL00
Frequency: 868.3MHz AM (Optional 433.92MHz AM)
Coding: 18bit-Dickert-Linearcode, Optional Dickert KeeLoq-Code
Product Overview
The OSR-868A1KL00 is a 1-channel outdoor hand transmitter designed for general remote control applications without safety relevance. It is registration and license-fee-free.
Key Features:
- Selectable Frequency: 868.3MHz or 433.92MHz AM. Range is optimized for 868MHz.
- Selectable Coding: 18bit-Dickert-Linearcode or Dickert KeeLoq-Code.
- Operating Voltage: 3V Lithium button cell battery CR2032.
- Temperature Range: -20°C to +60°C.
- Protection Type: IP67.
- Dimensions: Approx. 40 x 47 x 16 mm.
- Weight: Approx. 12g (incl. battery, without bracket).
Safety Notes:
- This remote control is only permitted for devices in systems where a malfunction does not result in danger to people or property, or this risk is covered by other safety equipment.
- Never allow children to play with the transmitter.
- Do not store or operate the transmitter in places exposed to direct sunlight.
Function Settings
The transmitter operates with 868.3MHz AM and Fixcode by default. The frequency and coding can be selected using the 2-pole coding switch [S1].
Switch Settings:
- [S1] Position 1: Selects Frequency (ON for 433.92MHz, OFF for 868.3MHz).
- [S1] Position 2: Selects Coding (ON for KeeLoq-Code, OFF for Linearcode).
Frequency and Coding Combinations:
- 868.3MHz, 18-Bit Linearcode: [S1] Position 1 OFF, Position 2 OFF.
- 433.92MHz, 18-Bit Linearcode: [S1] Position 1 ON, Position 2 OFF.
- 868.3MHz, KeeLoq-Code Dickert: [S1] Position 1 OFF, Position 2 ON.
- 433.92MHz, KeeLoq-Code Dickert: [S1] Position 1 ON, Position 2 ON.
Opening the Transmitter
The upper and lower shells of the housing are latched together. To adjust the coding switch [S1] and change the battery, the transmitter must be opened.
The opening point is located near the loop for the key ring. A flat-head screwdriver can be used to separate the housing halves.
Battery Replacement:
To replace the button cell battery, slide it from the center towards the outer edge. When inserting the new battery, follow the reverse procedure. The '+' side should face upwards.
Troubleshooting
- Check batteries; replace if necessary. Dispose of used batteries for recycling.
- Check the position and orientation of the receiver antenna/receiver.
Technical Specifications
Approval: No registration and free of charge.
Frequency: 868.3MHz, or optional 433.92MHz.
Modulation: AM.
Coding: Fixcode or optional KeeLoq.
Operating Voltage: 3V Lithium button cell battery CR2032.
Power Consumption (Transmit): Typ. 19mA @ 868MHz; Typ. 13mA @ 433MHz.
Standby Consumption: <0.2μΑ.
Temperature Range: -20°C to +60°C.
Protection Type: IP67.
Dimensions: Approx. 40 x 47 x 16 mm.
Weight: Approx. 12g incl. battery, without bracket.
Declaration of Conformity
Dickert Electronic GmbH, Fünfhausen 1, D-35091 Cölbe-Schönstadt, Tel.: +49 6427/9224-0, Email: info@dickert.net, hereby declares that the radio equipment type OSR is in compliance with Directive 2014/53/EU and 2011/65/EU.
The full text of the EU declaration of conformity is available at: ce.dickert.com.
CE Marking: CE
Manufacturer Information
Dickert Electronic GmbH
Fünfhausen 1
D-35091 Cölbe-Schönstadt
Website: www.dickert.com
Email: info@dickert.com
Phone: +49 6427 9224 0
Disposal Information
Dispose of batteries in a recycling container. [Recycling symbol]
