MARQUANT Speaker Wall Mount

Product Overview

This document provides operating instructions and safety information for the MARQUANT Speaker Wall Mount, model number 929051. It is designed for securely mounting speakers to walls for optimal audio placement.

Safety Instructions

• Read the entire user manual before starting installation and assembly. [? Read instructions]
• Maximum load capacity: 3.5 kg.
• Follow all instructions carefully. Incorrect installation can result in personal injury and/or material damage.
• The product is designed for installation on walls with wooden studs, concrete walls, or brick walls.
• Ensure the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
• Use the mounting screws provided and do not overtighten them. Fasten screws in the middle of studs where appropriate.
• Use safety equipment and suitable tools for the installation.
• The product contains small parts that can result in a risk of suffocation if swallowed. Keep these parts out of the reach of children.
• The product is only intended for indoor use. Using it outdoors can result in personal injury and/or material damage.
• Check at regular intervals, or at least every three months, that the product is firmly attached.

Important!

Before installation, ensure that you have received all parts according to the component checklist. If any parts are missing, contact customer service.

Installation Guide

Parts Included

• A (x2): Speaker Brackets (main bracket and wall plate)
• B (x4): Mounting Screws (for attaching bracket to wall)
• C (x4): Wall Plugs (for use in concrete/brick walls)
• D (x4): Speaker Attachment Screws (for securing speaker to bracket)

Assembly Steps

1. Identify Parts: Verify all components (A, B, C, D) are present and undamaged.
2. Prepare Wall Mounting Plate: Attach the wall mounting plate (part of A) to the wall.
3. Mark and Drill Holes: Use the wall mounting plate as a template to mark hole positions. Drill holes suitable for the wall type and provided wall plugs (C). Recommended drill bit size: 3mm (1/8"). Recommended screw length: 25mm (1.0"). For stud mounting, ensure screws (B) are fastened into the center of the studs.
4. Secure Wall Mounting Plate: Insert wall plugs (C) into drilled holes if necessary. Secure the wall mounting plate to the wall using mounting screws (B). Ensure the plate is level and firmly attached. Diagrams indicate correct [✔️] vs. incorrect [❌] mounting methods.
5. Attach Speaker to Bracket: Secure the speaker to the main bracket (part of A) using the provided speaker attachment screws (D).
6. Mount Speaker Assembly: Slide the speaker assembly onto the wall mounting plate and secure it.
7. Adjust Speaker Position: The mount allows for adjustable angles: ±20° vertical tilt and ±140° horizontal swivel.

Installation Notes:

• Ensure correct screw type and length for your wall type.
• Do not overtighten screws.
• The maximum load capacity is 3.5 kg.

Environmental Considerations

Care for the environment! Recycle discarded products in accordance with local regulations. [♻️ Recycling symbol]

Company Information

JULA AB, BOX 363, SE-532 24 SKARA

For the latest version of operating instructions, visit www.jula.com.