MARQUANT 002-214 Powerbank
Model: 002-214
Product Overview
The MARQUANT 002-214 is a portable power bank featuring a solar panel for charging. It includes multiple USB output ports, LED indicators, a power switch, and an integrated flashlight.
Key Components:
- 1. Solar Panel: Located on the top surface for solar charging capabilities.
- 2. USB Port 1 A: An output port providing 5V/1A for charging devices.
- 3. Power Switch: Used to turn the power bank on/off and control the flashlight functions.
- 4. LED Indicators: Display the charging status of the power bank and its remaining battery capacity.
- 5. USB Port 2.1 A: An output port providing 5V/2.1A for faster charging of compatible devices.
- 6. Torch: An integrated LED flashlight for illumination.
- 7. Micro USB Port: The input port used for charging the power bank itself via a USB cable.
Safety Instructions
- Do not expose the product to temperatures exceeding 45°C for extended periods.
- Avoid exposing the product to dusty environments.
- Do not charge the power bank while it is simultaneously charging another device.
- Disconnect cables when the product is not in use to prevent potential issues.
- Do not short-circuit, open, or modify the product in any way.
- Keep the product away from water and fire hazards.
- Do not use the product if it or its power cord is damaged.
Technical Data
| Specification | Value |
|---|---|
| Battery | 8000 mAh Li-Ion |
| Charging In (USB) | 5 V / 2 A |
| Charging In (Solar Panel) | 120-200 mA |
| USB Port 1 Output | 5 V / 1 A |
| USB Port 2 Output | 5 V / 2.1 A |
| Charging Time | 5-8 hours |
| Dimensions | 140 x 75 x 17 mm |
| Weight | 200 g |
How to Use
Charging the Power Bank
Connect a USB cable to the power bank's charging port (Micro USB) and to a USB charger. The LED indicators will show the charging progress in four steps (25%, 50%, 75%, 100%). A full charge takes approximately 5-8 hours. Solar charging is an alternative method intended for situations where a standard USB connection is not available.
Charging Devices
Connect a USB cable from one of the power bank's USB output ports (Port 1 or Port 2) to the device you wish to charge. Press the power switch to start charging. Charging begins automatically. The LED indicators will display the remaining battery capacity of the power bank.
Turning Off
To turn off the power bank, press and hold the power switch for two seconds.
Using the Torch
Double-click the power switch quickly to turn the integrated torch on or off. When the torch is on, a single press of the power switch will cycle through flashing light modes, and another press will activate a flashing SOS signal.
Maintenance
- Clean the power bank with a dry, soft cloth. Never use solvents or corrosive chemicals.
- If the power bank will not be used for an extended period, charge it fully every 3 months to maintain battery health.
Environmental Information
Dispose of this product responsibly by recycling it in accordance with local regulations. Manufactured by JULA AB, BOX 363, SE-532 24 SKARA. Document Date: 2022-01-11.
