Aldes VELONE® 2 F400-120 1.2 Smoke Extraction Turret

Model: 11021191

Product Overview

The VELONE® 2 F400-120 1.2 is a smoke extraction turret designed for tertiary, industrial, and collective housing premises. It is classified as F400-120 according to EN 12101-3.

Image of the Aldes VELONE® 2 F400-120 1.2 smoke extraction turret.

Key Product Advantages:

Protected accessories against shocks and weather thanks to the metallic casing.
Factory-wired electrical accessories protected against shocks and weather.
Factory-connected airflow pressure switch.

Functioning Principles

Upon command from the Fire Safety Control Panel (CMSI), the VELONE F400 smoke extraction turret is activated in smoke extraction mode by the relay control unit. The control unit then switches it to 'fault' mode and subsequently to 'standby' mode.

Product Description

The VELONE® F400-1.2 - Tri/Mono is part of the F400-120 classified smoke extraction turret range, suitable for tertiary, industrial, and collective housing. Its design allows for airflows up to 27,000 m³/h without increasing the base dimensions. Aldes offers a 'All-in-One' solution with a factory-fitted relay control unit for this range.

Application Areas

Collective residential housing, New construction, Renovation, Tertiary premises

Installation

Outdoor installation, directly on a duct or on a roof outlet (accessory).

Main Characteristics

Classification F400-120 according to EN 12101-3.
Optional non-return damper and rain protection kit compliant with CE certificate.
Airflow from 100 to 1,200 m³/h at 200 Pa.
Possible factory connection of the airflow pressure switch.
Galvanized steel base and motor support.
ABS hood fixed with 4 quick-thread screws.
Galvanized steel reaction impeller.
Class F, IP55 electric motor.
Galvanized steel protection grille.
Pivoting shaft for easy cleaning.
Can replace any Velone turret delivered between 1998 and 2007 due to identical base dimensions.
Type 1.2 M: 4 poles, 230V, 0.24kW, 50Hz, 2.4A nominal, Id/ln 2.9, IE2 efficiency class.
Type 1.2-4T: 4 poles, 400V, 0.25kW, 50Hz, 0.75A nominal, Id/ln 4.3, IE2 efficiency class.

Complementary Characteristics

Available accessories (fire tested and CE certified):
IPX4 rain protection kit (tested in laboratory for smoke extraction only), sprays water in all directions.
Sheet metal rain protection kit (for smoke extraction and ventilation).
Non-return damper.
Vertical discharge kit.
Sealing frame or on-duct frame.
Pivoting shaft.
Roof outlet or terrace outlet (with slope).
Discharge blanking plug.
Electrical accessories: Single-phase voltage variator, Three-phase auto-transformer, Frequency variator.
Available options: Aerodynamically connected, fixed, and protected pressure switch; Wired, fixed, and protected proximity switch; 'All-in-One' solution (not available in single-phase): relay control unit supplied wired with pressure switch and proximity switch.
EPOXY paint finish.

Accessories

Designation	References
Non-return damper 1.2/1.5/3.2	11021260
IPX4 Rain Protection Kit - 1.2/1.5/3.2	11021285
VELONE 1.2/1.5/3.2 Vertical Discharge Kit	11021366
3-phase Auto-transformer 2A	11086096
VELONE F400-120 Pivot Shaft - Model 1.2/1.5/3.2 - 533 mm base	11021069
AXONE/SOS VELONE Double Reset Box	11057200
VELONE 1.2/1.5/3.2 Sealing Frame	11021290
VELONE 1.2/1.5/3.2 On-Duct Frame	11021295
Terrace Roof Outlet H330 VELONE F400-120 Model 1.2/1.5/3.2-533 mm	11021080
1.2/1.5/3.2 Roof Outlet	11021085
Terrace Roof Outlet H500 1.2/1.5/3.2	11021140
VARILONE VF 0.75 kW - 3-phase/3-phase	11057270
Velone/Velone 2 Size 3 Kit	11021092
VELONE 1.2 Blanking Plug Kit	11021155
Axone Micro VELONE 1.2 All-in-One Support Kit	11021145
3-piece Sheet Metal Rain Protection Kit for VELONE Sizes 1.2/5/3	11021169
3-piece Vertical Kit for VELONE Sizes 1.2/1.5/3.2	11021165
4-piece Sheet Metal Rain Protection Kit for VELONE Sizes 1.2/5/3.2	11021173

General Data

References	Motor Type	Wheel Type
11021191	AC	Reaction

Dimensional Data

References	A (mm)	B (mm)	F (mm)	H (mm)	J (mm)	K (mm)	ØD (mm)	Weight (kg)
11021191	533	519	493	190	87	580	185	36

Diagram showing the dimensions of the VELONE® 2 F400-120 1.2 turret.

Installation Options & Accessories

Diagram illustrating various installation options and accessories for the VELONE turret.

Flowchart for selecting VELONE accessories and AXONE control units based on application and motor type.

Performance Curves

Performance curves for VELONE 1.2 - 4T, showing pressure (Pa) versus airflow (m³/h). Includes acoustic data (Lpm6 (dB(A))) at 6m.

Curve Notes:

Curves comply with NF EN ISO 5801 standard, with connected intake (Ø 250 mm).
Pressures indicated on the curves are static pressures.
Encircled values represent the overall sound pressure level radiated in free field at 6m, weighted A (Lpm6 (dB(A))).

	Aldes VELONE 2 F400-120 8.5 Smoke Extraction Turret - Technical Specifications Detailed technical specifications and features of the Aldes VELONE 2 F400-120 8.5 smoke extraction turret, including performance curves, dimensions, and available accessories.
	Aldes VELONE® 2 F400-120 3.2 Smoke Extraction Turret - Technical Data Comprehensive technical information and specifications for the Aldes VELONE® 2 F400-120 3.2 smoke extraction turret, designed for tertiary, industrial, and collective housing applications. Includes features, performance data, and available accessories.
	Aldes H330 VELONE F400-120 Smoke Vent Turret - 11021082 Technical specifications and installation guide for the Aldes H330 VELONE F400-120 smoke vent turret (model 11021082), designed for horizontal roof mounting.
	Aldes VELONE F400-120 Pivot Axle for Smoke Ventilation - Model 8.5/13.0 Detailed information on the Aldes VELONE F400-120 pivot axle, model 8.5/13.0, with an 834 mm base. This stainless steel pivot axle facilitates maintenance of the VELONE smoke ventilation turret by providing access to the duct and fan wheel. Suitable for new installations, renovations, and tertiary buildings. Includes installation instructions and key features.
	ProtectONE® R 21.0 EL 1V: Smoke Extraction Unit for Commercial and Industrial Buildings Detailed information on the ProtectONE® R 21.0 EL 1V smoke extraction unit by Aldes, including features, technical specifications, installation guidelines, and accessories for commercial and industrial applications.
	Aldes 11021263 Clapet Anti-Retour 20/27 - Accessoire de Ventilation Spécifications techniques et caractéristiques du clapet anti-retour Aldes 11021263 (réf. 11021263) pour tourelles de désenfumage. Détails sur les applications, la mise en œuvre, la résistance au feu et les dimensions.
	Aldes ProtectONE® T 11039535 TR 355 1V Smoke Extraction Unit Technical specifications and features of the Aldes ProtectONE® T 11039535 TR 355 1V smoke extraction unit, designed for tertiary and industrial applications. Includes operational principles, applications, installation guidelines, complementary features, accessories, options, electrical data, and performance curves.
	Aldes ProtectONE® TR 250 1V Smoke Extraction Unit - Technical Specifications Detailed technical specifications and features of the Aldes ProtectONE® TR 250 1V smoke extraction unit, including operational principles, applications, dimensions, electrical data, and performance curves.