Mark-10 Series F Test Frames

Quick Start Guide

Models: F755 | F755S | F1505 | F1505S

Software: IntelliMESUR® Software

Thank You

Thank you for purchasing a Mark-10 Series F Test Frame. With proper usage, we are confident that you will get many years of great service with this product. Mark-10 instruments are ruggedly built for many years of service in laboratory and industrial environments.

Please read through this Quick Start Guide and the complete User's Guide before use.

[Image: A Mark-10 Series F test frame with a control panel and force sensor attached.]

In the Box

Qty.	Description
1	Control panel, mounting bracket, and hardware (-IMT models only)
1	USB flash drive containing software installation files (-IM models only)
1	USB dongle (-IM models only)
1	USB cable -IMT models: right-angle C to B -IM models: A to B
1	Eye end kit for base
2	Lock ring for eye end
2	Spanner wrench
1	Power cord
1	Allen wrench set

Setup

Place the test frame on a clean, flat and level work area free from vibration. Ensure that the rear of the column is easily accessible to connect the power cord and connection cables. To prevent tipping, it is suggested to mount the test frame to a work bench via screws fastened into the underside of the base. Connect the power cord to an outlet.

Installing a Force Sensor

Install the sensor to the underside of the crosshead using the supplied socket head screw and hardware. Plug the connector into the receptacle in the top front surface of the crosshead, then fasten the two thumbscrews. Grips and fixtures may be threaded onto the underside of the sensor.

Installing the Control Panel (-IMT Models)

Test frame part numbers ending in "-IMT", for example Model F1505-IMT, include a Windows tablet with attached ball mount and mounting bracket, packaged separately. The mounting arm is pre-installed into the front right slot in the test frame column via two screws.

Loosen the knob sufficiently to slide the ball, mounted to the rear of the tablet, into the arm. Orient the tablet horizontally, with the USB-C port positioned on the left side. Adjust the viewing angle as desired, then tighten the knob.

Connect the included USB cable between the USB-C port and the USB-B port in the rear of the column, and connect the AC adapter connector.

Plug in the AC adapter and press the Power button, in the lower right corner of the tablet. The tablet will boot up directly into the IntelliMESUR application. If not, select the IntelliMESUR® icon in the Windows home screen.

Installing the Software (-IM Models)

For model numbers ending in “-IM”, a separate license is provided to install onto the user’s device. Locate the box containing a USB flash drive and USB dongle. Plug in the flash drive, then locate and double-click the file “setup.exe”. Refer to the User’s Guide for complete instructions.

Further Information

User’s Guide: www.mark-10.com/downloads/product-downloads/manualSeriesF.pdf

Download user’s guides, data sheets, software, solid models, and more: www.mark-10.com/downloads

	Mark-10 ESM Series Force Test Stands User's Guide Comprehensive user's guide for Mark-10 ESM Series Force Test Stands (ESM1500, ESM1500S, ESM750, ESM750S). Covers setup, safety, operation, troubleshooting, and specifications for tension and compression force measurement applications.
	Mark-10 Model M7I Advanced Force/Torque Indicator Quick Start Guide Quick start guide for the Mark-10 Model M7I Advanced Force/Torque Indicator, detailing product overview, included items, safety considerations, software downloads, and PC requirements for data acquisition.
	Mark-10 EC Declaration of Conformity for Force Gauges and Sensors Official EC Declaration of Conformity from Mark-10 Corporation, certifying compliance for various force gauges, torque sensors, torque testers, and wire crimp pull testers with relevant European directives.
	MARK-10 Manual Force Test Stands: TSB100, TSC1000, TSF Series MARK-10 offers a range of manual force test stands including the TSB100, TSC1000, and TSF series. These stands provide precise force measurement capabilities for various applications like spring, tensile, rubber, and polymer testing, featuring modular designs and optional digital travel displays.
	Mark-10 Series EK3 Ergonomics Kits Quick Start Guide \| Software Installation & Accessory Setup Comprehensive quick start guide for Mark-10 Series EK3 Ergonomics Kits. Covers MESUR software installation, PC requirements, included items, and detailed instructions for mounting double/single handles and various attachments.
	Mark-10 WT-205M Motorized Wire Crimp Pull Tester User's Guide This user's guide provides comprehensive instructions for the Mark-10 WT-205M Motorized Wire Crimp Pull Tester. It covers setup, safety precautions, operating modes, controls, calibration, specifications, and troubleshooting for pull test applications up to 200 lbF (1,000 N).
	Mark-10 90° Peel Fixture and Grips & Attachments Data Sheet Detailed data sheet for the Mark-10 G1109 90° peel fixture and related grips and attachments (AC1078, AC1079, AC1080, AC1087) for adhesive strength testing.
	Mark-10 WT-205 / WT-205M Wire Crimp Pull Tester Quick Start Guide Quick start guide for the Mark-10 WT-205 and WT-205M wire crimp pull testers, covering setup, safety, and software installation. Features include specifications, included items, and PC requirements.