PSVR2 SHOWCASE™ PREMIUM PSVR2 CHARGE & DISPLAY STAND
Product Overview
This product is the PSVR2 Showcase™ Charging Stand, designed exclusively to charge the PlayStation VR2 (PSVR2) Sense controllers. It provides an organized solution, keeping your PSVR2 and Sense controllers ready for your next play session. Both the left and right Sense controllers can be charged simultaneously using the included USB-C AC adapter. It is crucial to use only the provided AC adapter, as other adapters may damage the charging stand and the Sense controllers. Please read this manual and keep it for future reference.
Key Components:
- 1. USB-C Power Port for Included AC Adapter
- 2. Left/Right Charging LED Indicator
- 3. Left Magnetic Charging Port
- 4. Right Magnetic Charging Port
Package Contents
- PSVR2 Stand
- USB-C Magnetic Male Connector x2
- 5V/2A AC Adapter
- Warranty Card
- QR Card
Setup Instructions
- Connect the AC Adapter to the USB-C power port at the back of the PSVR2 Stand.
- The Logo LED of the PSVR2 Stand will light up, and both charging LEDs will light up and remain BLUE.
- Insert the included USB-C magnetic male connectors into each of the Sense controllers. These connectors can remain in the Sense controllers permanently and during gameplay.
- To charge the controllers after use, place the Sense controllers onto the appropriate left or right Sense controller cradles on the stand. The cradles are labeled L and R respectively.
- The front Left and Right charging LEDs will light up RED for the corresponding controller that requires charging.
- Once charging is complete, the front LEDs will return to BLUE.
- Before placing the Headset on the stand, ensure the front of the headset is extended to its maximum position. To do this, PRESS and HOLD the scope adjustment button on the top right of the headset and SLIDE out the scope.
- It is now safe to place and rest the headset on the stand for storage.
For more information, check out the setup video at: https://youtu.be/n5MovbYf4_Y
LED Indicators
| PSVR2 Stand Status | LED Lighting Status |
|---|---|
| No Sense Controller | Blue LED |
| Only Left/Right Controller Charging | Left/Right Charging LED is Red |
| Both Controllers Charging | Both Charging LEDs are Red |
| Controller Fully Charged | Charging LED is Blue |
| Charging Error | Charging LEDs Blink Red |
Specifications
- Input: DC 5V 2A
- Output: 5V 700mA*2
- Charging Time: Less than 90 minutes
- Overcurrent Protection: Each port's charging current cannot exceed 1100mA
- Overvoltage Protection: Input voltage is more than 6.0V
- Low Voltage Protection: Input voltage is less than 4.6V
Troubleshooting
| Issue | Solution |
|---|---|
| No Red Charging LED | Please check that the USB-C magnetic male connector is inserted securely into the Sense controller's USB-C port. Ensure the Sense controller is placed onto the PSVR2 Stand in the correct position. |
| VR2 Stand is Not Powered ON | Please check the connection between the AC adapter and the PSVR2 Stand. Ensure the USB-C connector is inserted firmly. |
| Flashing Red LED | Please check for any obstructions to charging and verify that the correct AC adapter is being used. Simply REMOVE the Sense Controller & Magnetic Connector, wait 5 seconds, and RESEAT the controller into the charging dock. |
Precaution and Maintenance
- Store in a cool, dry, and dust-free area.
- Do not store in areas of extreme low temperatures (0 °C) or high temperatures (40 °C).
- Avoid direct sunlight and heat sources.
- Do not allow the product to get wet or dirty, as this may cause damage.
- Do not clean with benzene, paint thinner, acetone, alcohol, or other solvents.
- Do not take the product apart, as doing so will void your warranty and may cause electrical shock or damage to internal components.
- Please help conserve the environment by recycling the cardboard packaging of this product.
- This product should NOT be disposed of in normal household waste and should be disposed of separately. Please take it to an electrical waste collection point.
