Jabra Evolve 65 TE
User Manual
Technology for life's new rhythm
Copyright and Model Information
© 2024 GN Hearing A/S (GN Audio A/S). All rights reserved. Jabra® is a registered trademark belonging to GN Audio A/S. Other trademarks mentioned here belong to their respective owners. The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of these marks by GN Audio A/S is under license.
Made in China
MODEL: HSC018Wa END085W
Declaration of Conformity can be found at www.jabra.com/doc
Rev C
Welcome
Thank you for using the Jabra Evolve 65 TE. We hope you will like it!
Jabra Evolve 65 TE - Features
- Connects to your computer via the Jabra Link 390 Bluetooth adapter or USB cable.
- Connects to mobile devices via Bluetooth.
- Built-in Busylight.
- Superior audio and voice capabilities.
- HiFi audio.
Overview
2.1 Stereo Variant
Diagram showing the Jabra Evolve 65 TE stereo headset. Callouts indicate: Adjustable headband, Volume up, Busylight indicator, Multifunction button, On/off/connect button, USB port for connection and charging, Status lamp, Volume down, Microphone boom.
2.2 Mono Variant
Diagram showing the Jabra Evolve 65 TE mono headset. Callouts indicate: Adjustable headband, Volume up, Busylight indicator, Multifunction button, On/off/connect button, USB port for connection and charging, Status lamp, Volume down, Microphone boom.
2.3 Included Accessories (Stereo and Mono)
- Travel case
- USB cable
- Bluetooth adapter: Jabra Link 390 USB-A
How to Wear the Product
3.1 Wear on Left or Right
The Jabra Evolve 65 TE can be worn on the left or right by rotating the microphone to the other side (270° max). Do not rotate the microphone more than 270°, to avoid damaging it.
Illustration of a person wearing the Jabra Evolve 65 TE headset. A circular arrow indicates the microphone boom can be rotated up to 270 degrees.
3.2 Adjust the Headband
Adjust the headband until it fits as comfortably as possible.
Illustration showing how to adjust the headband for a comfortable fit.
3.3 Position the Microphone
It is recommended to position the microphone close to your mouth (a few cm away). The microphone can be bent as desired.
Illustration showing the microphone positioned close to the user's mouth. A separate illustration shows the microphone boom can be bent. Safety information regarding potential recording is provided.
SAFETY INFORMATION: Microphones can potentially be used to record private conversations.
Charging the Battery
The headset battery charges when the headset is connected to a computer via USB cable, or when using a USB charger that came with your mobile device. The headset can still be used for calls while charging via USB cable connected to a computer. It takes approximately two hours to charge the battery.
Diagram illustrating the headset connected to a laptop via a USB cable for charging.
4.1 Sleep Mode
When the headset is turned on and not in use, it automatically enters sleep mode after 15 minutes to save battery. To manually exit sleep mode, press any button on the headset. After 24 hours in sleep mode, the headset will turn off completely. To turn the headset back on, move the On/off/connect button from On to Off and then back to On. Sleep mode is enabled by default and can be disabled via Jabra Direct.
Connecting the Product
5.1 Connect to Computer (via Jabra Link 390)
- Ensure the headset is on.
- Connect the Jabra Link 390 USB adapter to a USB port on your computer. The headset and Jabra Link 390 are pre-connected.
Diagram showing the Jabra Link 390 USB adapter plugged into a laptop's USB port, with the headset connected.
Before first use, it is recommended to update the headset to the latest firmware with Jabra Direct or Jabra Sound+.
SAFETY INFORMATION: No encryption is used for data exchange between the headset and USB devices or ports.
5.2 Connect to a Mobile Device (via Bluetooth)
- Put on the headset.
- Hold the On/off/connect button in the connection position for three seconds until you hear voice prompts. The Bluetooth indicator will flash blue.
- Follow the voice prompts to connect.
Diagram showing the on/off/connect button being held in the connection position, with the Bluetooth indicator blinking blue.
Before first use, it is recommended to update the headset to the latest firmware with Jabra Direct or Jabra Sound+.
SAFETY INFORMATION: The headset uses a secure Bluetooth connection with a 128-bit encryption key. If your Bluetooth device does not support secure connections, it will not be able to pair with or connect to the headset.
5.3 Connect to Computer (via USB Cable)
- Ensure the headset is on.
- Connect the headset to a USB port on your computer using the included USB cable.
Diagram showing the headset connected to a laptop via a USB cable.
Before first use, it is recommended to update the headset to the latest firmware with Jabra Direct or Jabra Sound+.
SAFETY INFORMATION: No encryption is used for data exchange between the headset and USB devices or ports.
What the Lights Mean
BUSYLIGHT INDICATOR
- Busylight on: Red ?
- Incoming call: Red ?
STATUS LAMP
- Connected or incoming call: Blue ?
- Pairing: Pulsing blue ?
- Charging: Red ?
- Fully charged battery: Green ?
- Power on: Flashing green ?
- Power off or low battery: Flashing red ?
Diagram illustrating the headset with callouts for the Busylight indicator (showing red for busy/incoming call) and the Status Lamp (showing different colors for connection, pairing, charging, and battery status).
Usage
Diagram showing the Jabra Evolve 65 TE headset with labels for adjustable headband, volume up, busylight indicator, multifunction button, on/off/connect button, USB port for connection and charging, status lamp, volume down, and microphone boom.
7.1 Daily Functions
| Function | Action |
|---|---|
| Headset on/off ? | Change state using the On/off/connect button. |
| Answer/end call ? | Press the Multifunction button. |
| Reject call ❌? | Double-press the Multifunction button. |
| Battery and connection status ? | Press the Multifunction button when not in a call. |
| Activate/deactivate voice prompts ?️ | Hold the Multifunction button when turning on the headset. |
| Adjust volume ? / ? | Press the Volume up or Volume down button. |
| Turn Busylight on/off manually ? | Press the Volume up and Volume down buttons simultaneously. |
| Activate/deactivate Busylight function ?⚙️ | Hold the Volume up and Volume down buttons simultaneously for three seconds. |
| Microphone mute/unmute ? | Hold the Volume down button for 2 seconds. |
7.2 Handling Multiple Calls
The headset can receive and handle multiple calls simultaneously.
| Function | Action |
|---|---|
| End current call and answer incoming call | Press the Multifunction button. |
| Switch between parked and active call* ? | Hold the Multifunction button for 2 seconds. |
| Park current call and answer incoming call* | Hold the Multifunction button for 2 seconds. |
| Reject incoming call while on a call | Double-press the Multifunction button. |
*All headsets except the Microsoft Teams variant of the headset.
7.3 Busylight
The Busylight indicator on the headset can be turned on to show others that you are busy.
TURN BUSYLIGHT ON/OFF MANUALLY
Turn Busylight on/off manually by pressing the Volume up and Volume down buttons simultaneously.
ACTIVATE/DEACTIVATE BUSYLIGHT FUNCTION
To activate/deactivate the Busylight function, hold the Volume up and Volume down buttons simultaneously for three seconds.
7.4 Using the Travel Case
It is recommended to use the travel case when transporting the headset from place to place to avoid damage.
1. Fold the earcups inwards.
2. Place the headset into the travel case.
Illustration showing how to fold the earcups of the headset and place it into its travel case.
The earcups can only be rotated in one direction. Do not rotate the earcups in the opposite direction, to avoid damaging the headset.
Software and Firmware
8.1 Jabra Direct
Jabra Direct is a computer program designed to support, manage, and enable optimal functionality for Jabra devices. Download the latest version for free from jabra.com/direct.
8.2 Update Firmware
Before first use, it is recommended to update the headset to the latest firmware with Jabra Direct. Firmware updates improve performance or add new features to Jabra devices.
- Connect the Jabra Evolve 65 TE to a computer.
- Use Jabra Direct to search for the latest firmware updates.
8.3 Reset Headset
When you reset the headset, the list of paired devices is cleared, and all settings are reset.
- Hold the Volume up button and then press the Multifunction button to reset the headset.
Illustration showing the user holding the Volume up button and pressing the multifunction button to reset the headset.
2. The headset must be paired with the mobile device again. It is important to remove/forget the pairing in the Bluetooth menu of the previously paired device.
Support
9.1 Frequently Asked Questions
Frequently asked questions can be found at jabra.com/support.
9.2 How to Care for Your Headset
- Always store the headset turned off and well protected.
- Avoid storage in extreme temperatures (above 50°C or below -10°C). This can shorten the battery life and negatively affect the headset.
