APP LIGHTS
Smart RGB LED Flagpole Christmas Tree Lights
App & Remote control
Product Parameters
- Category
- LED Controller
- Domination Principle
- Ble
- APP
- Surplife
- Operation Platform
- Android 7.0 or IOS12.0 or later
- Input Voltage
- DC5V
- Supported Driver IC
- OS-P009
- Working Temperature
- -20~+55°C
- Control Distance
- Visible distance 30M
- Certification
- CE, RoHS, FCC
- Net Weight
- 630g
- Dimension
- 1M*1M/2M*2M...1000M*1000M
Download Surplife APP
Download the "Surplife” APP from the App Store or Google Play Store. The app icon features a stylized house with a Wi-Fi symbol, labeled "Surplife APP".
How to connect to Surplife App?
-
Register/Login: Open the Surplife app and register for a new account or log in to your existing Surplife account. The app interface shows screens for signing up with an email and password, and logging in.
-
Enable Bluetooth: Turn on the LED curtain light device and ensure your phone's Bluetooth is enabled.
-
Add Device: In the Surplife app, tap the "add device" button or the "+" icon to begin the process of adding your new device. The app will search for nearby devices. A screen shows "DeviceBCF2" as a detected device.
-
Rename and Assign Room: After the device is added, you will be prompted to rename it and select a room for it within the app. The app provides options to name the device (e.g., "DeviceBCF2") and assign it to a room like "Livingroom", "Master bedroom", etc.
Once connected, the app can automatically match the light without additional steps, allowing for simple and quick smart light experience.
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum 20cm distance between the radiator and your body. Use only the supplied antenna.
Frequently Asked Questions
How to set up your Bluetooth LED curtain light?
- Enable your Bluetooth on your phone.
- Then power on the LED curtain light.
- Open the "Surplife" App. The app can directly connect to the device, automatically matching the light without other steps. You can experience the smart light simply and quickly.
How can I do if connecting the Bluetooth device or adding a new device failed?
Please power off the LED strip light, then turn it on again. If the problem persists, please restart your phone.
For further assistance, refer to the electronic manual or the APP FAQ.
The diagrams illustrate powering a device via a wall socket and the LED lights emitting colorful illumination.
