HOTO Camplight User Manual

01 Product Overview

Read this manual carefully before use, and retain it for future reference. Thanks for using HOTO Camplight.

Product Components:

• 1. Flashlight: For focused illumination.
• 2. Camp light: For general area lighting.
• 3. Ambient light: For creating atmosphere.
• 4. Mode adjusting head: Used to switch between lighting modes.
• 5. Switch button: Controls power and brightness adjustments.
• 6. Battery indicator light: Shows battery status.
• 7. Outer casing: The main body of the product.
• 8. Charging port: Type-C port for charging.
• 9. Hook: For hanging the light.
• 10. Foldable lampshade: Diffuses light for softer illumination.

02 How to Use

Mode Adjusting Head

This product features three distinct lighting modes. To select a desired mode, rotate the mode adjusting head and align the markings on the lampshade with those on the cylinder tool body.

• [Flashlight Mode Icon] Flashlight mode: Ideal for travel and long-distance illumination.
• [Camp Light Mode Icon] Camp Light mode: Suitable for illuminating surroundings.
• [Ambient Light Mode Icon] Ambient Light mode: Designed for creating atmosphere.

When the product is powered "ON", modes can be freely adjusted by rotating the mode adjusting head. The selected mode will activate at its highest light intensity.

ON/OFF and Brightness Control

Under the Flashlight Mode:

• Press the switch button to turn the Flashlight on gradually.
• Press it again to turn the Flashlight off gradually.
• The flashlight defaults to its brightest setting. Press and hold the switch button for stepless dimming, adjusting brightness from highest to lowest. Corresponding mode indicators will light up progressively.
• Press and hold again to switch from the lowest brightness back to the highest. Corresponding mode indicators will light up progressively.

Under the Camp Light Mode:

• Press the switch button to turn the Camp Light on gradually.
• Press it again to turn the Camp Light off gradually.
• The camp light defaults to its brightest setting. Press and hold the switch button for stepless dimming, adjusting brightness from highest to lowest. Corresponding mode indicators will light up progressively.
• Press and hold again to switch from the lowest brightness back to the highest. Corresponding mode indicators will light up progressively.

Under the Ambient Light Mode:

• Press the switch button to turn the Ambient Light on gradually.
• Press it again to turn on the Candlelight mode.
• Press it again to turn the Ambient Light off gradually.
• The ambient light defaults to its brightest setting. Press and hold the switch button for stepless dimming, adjusting brightness from highest to lowest. Corresponding mode indicators will light up progressively.
• Press and hold again to switch from the lowest brightness back to the highest. Corresponding mode indicators will light up progressively.

Brightness cannot be changed under Candlelight mode.

Note: All functions can be used normally while the product is being charged.

Charging and Battery

Charging

Plug a Type-C charging cable into the charging port to charge the product. This product is equipped with a Type-C charging cable.

Battery Indicator Light

In the "ON" status, the battery indicator light shows:

• Flashing red light: 0-10% battery remaining.
• Continuous red light: 10%-30% battery remaining (turns off after 5 seconds).
• Continuous orange light: 30%-60% battery remaining (turns off after 5 seconds).
• Continuous green light: 60%-100% battery remaining (turns off after 5 seconds).

Charging Indicators:

• Charging in process: Red breathing light (breathing rate: every 3 seconds).
• Charging completed: Permanent green light.

Foldable Lampshade

To attach the foldable lampshade, align it with the groove between the mode adjusting head and the body's outer casing, where the magnets are located.

03 Warning

Safety Precautions

• For proper use: Please follow the instructions in this User Guide to use this product properly.
• Repair services: Do not disassemble this product. Only authorized personnel are allowed to repair this product to avoid safety accidents.
• Charging instructions:
  1. This product can only be charged with a charger that meets its charging parameters.
  2. If the status indicator light does not work properly during charging after a long period of disuse, please charge it for 30 minutes for observation.
• Instructions for use:
  1. This product emits strong light. Keep direct rays of light away from eyes of people and animals, and the lens of optical equipment.
  2. To reduce the risk of injury, children should be accompanied by their parents when using this product.
  3. To reduce the risk of electric shock, do not place this product in water or other liquids.
  4. Do not place or store this product where it may fall into a bathtub or sink.

Warnings

1. Damages caused by using a charger with unfitting parameters for charging are not covered by the warranty and may lead to other hazards.
2. If the battery temperature reaches 45°C, the charging protection function will be triggered, and charging will be discontinued. The recommended ambient temperature for charging is 0-30°C.

Battery Safety Warnings

• Do not open or shred the battery.
• Do not expose the battery to heat sources or flames. Do not store the battery under direct sunlight.
• Do not perform mechanical shocks to the battery.
• If the battery accidentally leaks, avoid direct contact of leaking liquid with skin or eyes. In case of contact, rinse with abundant water.
• Charge the battery before first use.
• After long-term storage, the battery needs to be charged and discharged several times to obtain the best battery performance.
• Battery performance is best when used at ordinary temperature (20±5°C).
• The battery must be removed before this product is disposed of.
• Before removing the battery, the power of this product must be cut off.
• Please recycle and dispose of the battery in an environmentally correct manner.

⚠️ All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. [WEEE disposal symbol]

Declarations of Conformity

FCC Supplier's Declaration of Conformity

We Shanghai HOTO Technology Co., Ltd., hereby declare that this equipment is in compliance with the applicable Directives and European Norms, and amendments.

This supplier's declaration of conformity is hereby for:

• Product: HOTO Camplight
• Model Number(s): QWLYD001
• Brand/Trade: HOTO

We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part 15 Regulation.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Representative of Responsible Party for SDoC:

• Company: HOTO (US) TECHNOLOGY CO LTD
• Address: 919 North Market Street, Suite 950, Wilmington DE 19801, Country: U.S.A.
• Customer Service(US): +1 855-577-2659 (Mon-Fri 9:00am-5:00pm CST)

EU Declaration of Conformity

CE We Shanghai HOTO Technology Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments.

We declare that the product: HOTO Camplight / QWLYD001 Complies with the essential health and safety requirements of the following directives:

• 2014/35/EU The Low Voltage Directive
• References to the following harmonized standard were made: EN 60598-1:2008, EN 60598-2-4:2018

• 2014/30/EU Electromagnetic Compatibility directive References to the following harmonized standard were made: EN 55015:2019, EN 61547: 2009, EN 62471:2008

• 2011/65/EU+ (EU) 2015/863 Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment

Authorised signatory and technical file holder: Shanghai HOTO Technology Co., Ltd., Building 45, No.50 Moganshan Road, Shanghai, China.

UK Declaration of Conformity

UK CA We Shanghai HOTO Technology Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments.

We declare that the product: HOTO Camplight/QWLYD001 Complies with the essential health and safety requirements of the following directives:

• Electrical Equipment (Safety) Regulations 2016 and Electromagnetic Compatibility Regulations 2016 Electromagnetic Compatibility directive References to the following harmonized standard were made: BS EN IEC 60598-1: 2021 + A11:2022, BS EN 60598-2-4: 2018, BS EN 62493: 2015, BS EN IEC 55015: 2019+A11:2020, BS EN 61547: 2009
• Electronic Equipment Regulations 2012 (S.I. 2012/3032) (as amended) Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment

Authorised signatory and technical file holder: Shanghai HOTO Technology Co., Ltd., Building 45, No.50 Moganshan Road, Shanghai, China.

04 Specifications

Lighting Parameters

The data parameters mentioned are measured in a laboratory environment and may differ due to objective environmental and usage factors. The light source of this luminaire is not replaceable; the entire luminaire should be replaced when the light source reaches the end of its life. If the external cable or cord is damaged, it must be replaced with a cable or cord specially provided by the manufacturer or its service agent.

Manufacturer: Shanghai HOTO Technology Co., Ltd.

Address: Building 45, No.50 Moganshan Road, Shanghai, China.

Troubleshooting