Aerocool Streak PC Case

Model: ACCM-PV19012.11

Front Panel Connections

This section details the front panel connectors for your PC case. Proper connection ensures functionality of power, reset, LED indicators, and USB ports.

Front Panel Connector Pinout:

POWER SW: Controls the system power on/off.
RESET SW: Resets the system.
HDD LED: Indicates hard drive activity.
POWER LED: Indicates system power status.
USB: For connecting USB devices (e.g., USB 3.0, USB 2.0).
HD AUDIO & Mic.: For connecting audio devices and microphones.
LED Strip: For connecting RGB or LED lighting strips.

Refer to your motherboard's manual for precise pin assignments.

Accessory Bag Contents

The accessory bag typically contains the necessary hardware for installation:

[1] SSD Screw: Used for mounting 2.5-inch SSDs.
[2] HDD Screw: Used for mounting 3.5-inch HDDs.
[3] PSU Screw: Used for securing the Power Supply Unit (PSU).
[4] MB Standoff: Small risers that elevate the motherboard from the case chassis, preventing short circuits.

Note: Specifications may vary. Consult your local retailer for specific details.

Installation Guide

Follow these steps to install your components:

Step 1: Install Motherboard

Place the motherboard onto the pre-installed or manually installed standoffs within the PC case. Align the motherboard's screw mounting holes with the standoffs. Secure the motherboard using the provided MB Screws.

Step 2: Install PSU

Mount the Power Supply Unit (PSU) into its designated bay, typically at the bottom or rear of the case. Secure it using the PSU Screws.

Step 3: Install Add-on Card

Insert expansion cards, such as graphics cards or sound cards, into the appropriate PCIe slots on the motherboard. Secure the card to the case chassis using screws if necessary.

Step 4: Install 3.5" HDD

Mount up to three 3.5-inch Hard Disk Drives (HDDs) into the drive bays. Use the HDD Screws to secure them in place.

Step 5: Install 2.5" SSD

Mount up to four 2.5-inch Solid State Drives (SSDs) into their designated mounting points or drive bays. Use the SSD Screws to secure them.

Step 6: Install Front Fans

Mount the front intake fans into the front of the case. Ensure proper airflow direction (typically pulling air into the case). Secure the fans with screws.

Step 7: Install Front Radiator

If using a liquid cooling system, install the front radiator. Mount the radiator and fans according to the radiator's specific instructions, ensuring it fits within the case's front mounting points.

Front I/O Panel Ports

The front panel provides convenient access to essential ports:

Power Button: To turn the system on/off.
Reset Button: To restart the system.
USB 3.0: High-speed USB ports for peripherals.
USB 2.0: Standard USB ports.
HD Audio & Mic.: Connectors for headphones and microphones.

LED Control Button

This button allows control over the case's lighting effects. Press the button to cycle through different modes or colors. Hold the button for approximately 2 seconds to turn the LED lighting off.

Lighting Control Mapping:

RGB1-RGB11 correspond to various lighting channels.
Colors include: White, Cyan, Yellow, Purple, Blue, Green, Red.

Contact Information

For consultation and purchase of this equipment, please contact AND-Systems:

Address: 125480, Moscow, ul. Turistskaya, d.33/1

Website: https://andpro.ru

Phone: +7 (495) 545-4870

Email: info@andpro.ru

Mention the promo code AND-PDF for a discount.

	AeroCool FLO Computer Case Installation Guide Comprehensive guide for installing components into the AeroCool FLO PC case, covering motherboard, PSU, storage drives, expansion cards, and cooling solutions.
	Aerocool AirHawk / NightHawk PC Case Installation Guide A comprehensive guide for installing components into the Aerocool AirHawk and NightHawk PC cases, covering motherboard, PSU, storage drives, expansion cards, and cooling solutions.
	Aerocool Python PC Case Installation and User Guide Comprehensive guide for installing the Aerocool Python PC case, covering front panel connections, component installation (motherboard, PSU, drives, cards), fan and radiator mounting, and RGB fan hub setup.
	Aerocool CS-107 Mini Tower Case Installation Guide Comprehensive installation guide for the Aerocool CS-107 Mini Tower PC Case. Learn how to install your motherboard, power supply unit (PSU), storage drives (SSD/HDD), expansion cards, fans, and radiators. Includes front panel I/O setup and bag contents.
	Aerocool Aero-300 PC Case Installation Guide A comprehensive guide for installing components into the Aerocool Aero-300 PC case, covering PSU, motherboard, ODD, HDD, SSD, and fan installations.
	AeroCool D502A Mid Tower Case Installation and Connection Guide Detailed installation and connection guide for the AeroCool D502A Mid Tower Case, covering component installation, front panel I/O, and RGB fan hub setup for various motherboard sync technologies.
	Aerocool CS-103 PC Case User Manual This manual provides instructions for installing components into the Aerocool CS-103 PC case, including the motherboard, PSU, storage drives, and expansion cards. It covers front panel connections and fan installation.
	AeroCool Rift BG Computer Case Installation Guide Step-by-step guide for installing the AeroCool Rift BG PC case, covering front panel connections, accessory components, and the installation of motherboards, PSUs, add-on cards, 3.5" HDDs, 2.5" SSDs, and fans.