Olight PL-2 Valkyrie User Manual
Introduction
This document provides instructions for the Olight PL-2 Valkyrie flashlight.
Inside the Box
- PL-2 Valkyrie flashlight
- 1913 Rail Mount (for 1913 Rail)
- T6/T8 Socket Head Wrench
- 2 x 1600mAh CR123A Batteries
- User Manual
Specifications
Material: 6061-T6 aluminum alloy structure, Type III hard anodizing.
- Range: 235 meters
- Brightness: 1200-600 lumens
- Runtime: *1.5+70 minutes (Results are given based on tests using two 3V 1600mAh CR123A batteries)
- Waterproof Rating: IPX6
- Dimensions: 3.25*1.44*1.28 inches (82.5*36.5*32.5 mm)
- LED: Cree XHP35 HI
- Max Beam Intensity: 13800 cd
- Weight: 2.82 oz / 80 g (excluding batteries)
Supported Battery: 2 x CR123A
Installation
Battery Installation
1. Pull the spring lock and open the tailcap.
2. Insert the batteries inside the body following the direction of the positive and negative marks.
3. Hold the tailcap firmly and then close the spring lock. Before first use, open the tailcap, remove the insulating film, then cover the tailcap.
Pistol Light Installation
Pull open the swing arm. Align the two nuts with the slot of the pistol rail. Attach the light to the rail, turn, and fix the swing arm. Close the swing arm.
Operating Modes
The PL-2 has three different operational methods:
Constant ON/OFF
For constant illumination, single click either side switch. When the light is on, click either side switch to turn it off.
Momentary ON/OFF
When the light is off, press and hold either side switch. Release the switch to turn the light off.
Strobe ON/OFF
Press the left and right switches simultaneously and then release for constant strobe. Click either side switch to turn it off.
Safety Warning
DANGER: ⚠️ Do not turn the light directly into human eyes. This may cause blindness for seconds or hurt the eyes.
Warranty & Support
Warranty
Within 30 days of purchase: Return to retailer from which you purchased for repair or replacement.
Within 5 years of purchase: Return to Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse, disintegrations, negligence, accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olight itself.
Technical Support Inquiries
techsupport@olightworld.us
Customer Service
customer-service@olightworld.com, cs@olightworld.us
Visit www.olightworld.com to see our complete product line of portable illumination tools.
Manufacturer Information
OLIGHT Technology Co., Limited
Address: 5th Floor, Building A2, Fuhai Information Harbor, Fuhai Subdistrict, Bao'an District, Shenzhen, China 518103
Model Version: V2. 05, 15, 2017
Product Code: 3.0902.6010.9990
Compliance: RoHS, CE
