MAYFLASH NEW adapter for PS5

Overview

This adapter provides a solution for connecting wired PS4/PS5 controllers to joysticks (like MAYFLASH F300, F500) or FPS gaming adapters (like MAYFLASH MAX SHOOTER ONE, HAMA Speedshot) on both PS4 and PS5 systems. A function sample is available.

Features: Plug & play, no driver needed.

The adapter has two modes: LED blue indicates PS4 mode, and LED white indicates PS5 mode.

Image Description: A small black USB adapter is shown. One view highlights a 'mode switch' button on the side, while another shows the USB-A connector. The adapter features an LED indicator light.

How to Connect

1. Connect your joystick or FPS gaming adapter, which requires a wired PS4/PS5 controller, to your PS4/PS5 game console.
2. Plug this adapter into the USB slot of your joysticks or FPS GAMING adapter. The LED will be blue for PS4 mode and white for PS5 mode. Press the mode switch for 3 seconds to change the mode.
3. Once the joysticks or FPS gaming adapter are identified successfully, the LED on the adapter will remain lit.

How to Update Firmware

1. Download the latest firmware from the MAYFLASH official website: https://www.mayflash.com/Support/
2. Run the firmware update software on your Windows PC.
3. Press and hold the MODE switch on the adapter and plug it into a USB port on your PC.
4. As soon as the adapter is recognized by the software, select "Update".
5. Do not disconnect the device until you are informed that the update was completed successfully.

Compliance and Warnings

Warning

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.