MAYFLASH PodsKit Bluetooth USB Audio Adapter
For Nintendo Switch, PS4 & PC
FCC ID: 2ASVQ-NS003
Introduction
Thank you for purchasing the MAYFLASH PodsKit Bluetooth Audio Adapter for Nintendo Switch, PS4 and PC! Please read this manual thoroughly before using the PodsKit for the first time, and retain this manual for future reference.
System Compatibility
The PodsKit is compatible with the following platforms:
- Nintendo Switch ?
- Nintendo Switch Lite ?
- PS4 ▶️
- Windows PC ?
Quick Start
Follow these steps to connect your Bluetooth headphones or earphones:
Connection Methods:
- For Switch (handheld mode), Switch Lite, and PC (with USB-C port): Plug the PodsKit directly into the USB-C port of your console or PC.
- For Switch (docked mode), PS4, and PC (with USB-A port): Attach the included USB-C to USB-A adapter to the PodsKit before plugging it into the USB-A port.
Visual Description: A diagram shows the PodsKit being plugged into a USB-C port on one side, and the PodsKit with a USB-A adapter being plugged into a USB-A port on the other.
Pairing Process:
- Set your Bluetooth headphones or earphones to "pairing" mode. Refer to your Bluetooth device's operating manual for specific instructions.
- Enter pairing mode on the PodsKit by holding either button 1 or button 2 for 4 seconds.
- The LED indicator on the PodsKit will start flashing white, indicating it has entered pairing mode.
- Pairing is successful when the LED on the PodsKit changes from flashing white to a constant white light.
Visual Description: A sequence of diagrams illustrates the pairing process: headphones in pairing mode, pressing a button on the PodsKit for 4 seconds, the PodsKit's LED flashing white, and finally the LED showing a solid white light.
You are now ready to enjoy high-quality sound through your Bluetooth headphones / earphones!
Visual Description: A graphic representing sound waves indicates high-quality audio output.
Connecting a Second Bluetooth Device
The PodsKit supports simultaneous connection for two pairs of Bluetooth headphones or earphones.
- To connect a second pair, repeat steps 1-4 of the Quick Start guide.
- If you used pairing button 1 for the first device, use pairing button 2 for the second device (and vice versa).
- Once a device has been paired with the PodsKit, it will automatically reconnect the next time it is turned on.
Visual Description: A diagram shows the PodsKit connected to two separate pairs of headphones, with the LED indicator showing a solid white light.
Microphone
Visual Description: An icon representing a microphone is displayed.
The PodsKit supports audio transmission for Bluetooth headsets, which may include a microphone.
Product Specification
- Input port: USB Type C / USB A (using the included adapter)
- Transmission distance: 10m / 33ft
- Frequency range: 2.402GHz - 2.480GHz
- Product size: 48mm x 14mm x 5.0mm
- Platforms: Nintendo Switch, Switch Lite, PS4, PC
- Supported protocols: Qualcomm® aptX™ LL, aptX™, SBC, A2DP, AFH, HFP, HSP
- Low Latency transmission is available only when both the Bluetooth adapter and headset support aptX™ LL or aptX™ technology.
- Bluetooth headsets with aptX™ LL or aptX™ technology are recommended for music games.
- To activate low delay transmission using aptX™ or aptX™ LL protocols, both the Bluetooth headset and Bluetooth transmitter must be equipped with aptX™ or aptX™ LL technology.
- Due to Bluetooth signal transmission characteristics and size limitations, TWS (True Wireless Stereo) earphones typically have weaker signal strength and anti-interference ability compared to ordinary Bluetooth earphones.
- Due to the specific wireless technology in individual Bluetooth headsets, users may experience temporary disconnections or sound delays caused by electromagnetic interference. To mitigate this, reduce the distance between the Bluetooth headset and the PodsKit, or move to a different location.
Important Information & Compliance
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance Statement
This device has been evaluated to meet the general RF exposure requirement.
