SKOGSTA Chair Assembly Instructions
IKEA Design and Quality, IKEA of Sweden
Product Overview
This document provides step-by-step instructions for assembling the SKOGSTA chair by IKEA. Please follow these instructions carefully to ensure safe and correct assembly.
Parts List
Part Name/Description | Part Number | Quantity |
---|---|---|
Bolt | 10093115 | 2x |
Screw | 114575 | 6x |
Washer | 100842 | 6x |
Connector | 100514 | 2x |
Allen Key | 10083377 | 1x |
Tools required: Screwdriver [Tool: Screwdriver].
Assembly Steps
Step 1: Prepare the Seat
Place the chair seat upside down on a table covered with a protective cloth. [Place item here] ⬇️.
Step 2: Attach First Set of Legs
Attach the first set of legs to the underside of the seat. Use three screws (Part 114575) and three washers (Part 100842) per leg. Ensure you use the correct screw (114575) and not the bolt (10093115). [Correct part: Screw 114575, Washer 100842].
Step 3: Attach Second Set of Legs
Repeat the process from Step 2 to attach the second set of legs to the underside of the seat. Use three screws (Part 114575) and three washers (Part 100842) per leg. [Correct part: Screw 114575, Washer 100842].
Step 4: Attach Back Support Frame
Connect the back support frame to the seat assembly using two connectors (Part 100514) and two bolts (Part 10093115). Begin tightening these bolts with the Allen key (Part 10083377).
Step 5: Secure Back Support
Firmly secure the back support by tightening all six fastening points using the Allen key (Part 10083377). Ensure all connections are snug and stable. [Correct assembly: Tightened connections].
Assembly is now complete. Ensure all parts are securely fastened before use.
Document reference: AA-2376791-3. © Inter IKEA Systems B.V. 2022.