Amazon Basics Articulating TV Wall Mount Installation Guide

Product Overview

This document provides instructions for installing the Amazon Basics Articulating TV Wall Mount, suitable for most 22-inch to 55-inch TVs. The mount supports a maximum weight of 80 lbs (36.3 kg) and allows for a tilt of up to 15 degrees.

Product Name: Articulating TV Wall Mount

Compatibility: Most 22-inch to 55-inch TVs

Maximum Load Capacity: 80 lbs (36.3 kg)

Model Number: B01KBEOL5E

Manufacturer: Amazon Basics

Parts Included

The delivery content includes the following parts:

• EA (x1)
• MP (x1)
• AP (x4)
• IT (x1)
• HT (x1)
• FS (x2)
• TS (x3)
• U8 (x3)
• A (x4)
• C (x4)
• J (x4)
• L (x4)
• M (x4)
• OS (x4)
• BE (x8)
• E (x4)
• BF (x4)
• CC (x1)
• P (x8)
• R (x4)
• S (x4)
• T (x1)

Tools Needed

The following tools are required for installation:

• Drill with 10 mm (25/64 inch) drill bit
• Drill with 8 mm (5/16 inch) drill bit
• Drill with 4 mm (5/32 inch) drill bit
• Screwdriver
• Level
• Stud finder
• Pencil
• Measuring tape

Installation Steps

Step 1: Attach Brackets to TV

Attach the TV brackets (labeled A and C) to the back of your TV using the appropriate screws (J, L, M, P, R, S). Ensure the brackets are securely fastened. Note: Different screw sizes are provided to accommodate various TV models. Refer to the diagrams for correct screw selection.

Diagrams show attaching brackets to the back of a TV using screws and washers.

Step 2: Locate Wall Studs

Use a stud finder to locate wall studs. Mark the desired mounting location on the wall with a pencil. Ensure the mounting location is level.

Diagrams show using a stud finder and marking a level line on the wall.

Step 3: Mount the Wall Plate

Attach the wall plate (labeled CC) to the wall using the lag bolts (BE) and washers (BF). Ensure the wall plate is securely mounted into the studs. Use a level to confirm it is straight.

Diagrams show mounting the wall plate to the wall using lag bolts and washers, ensuring it is level.

Step 4: Attach the Arm Assembly

Lift the TV with attached brackets and hook it onto the wall plate. Secure the TV to the wall plate using the safety screws (TS) and any necessary adapters (e.g., U8).

Diagrams show lifting the TV and attaching it to the wall plate, then securing it with screws.

Step 5: Adjust and Secure

Adjust the TV to the desired angle. Tighten the locking mechanism to secure the TV in place. Ensure all connections are tight and the TV is stable.

Diagrams show adjusting the TV's position and tightening screws to lock it in place.

VESA Compatibility

The mount is compatible with the following VESA mounting patterns:

• 100x100
• 100x200
• 200x100
• 200x200
• 200x300
• 200x400
• 300x300
• 400x300
• 400x400

Diagrams illustrate various VESA pattern configurations.

Wall Type Considerations

The installation method may vary depending on your wall type (e.g., wood studs, concrete). Ensure you use the appropriate hardware for your wall type. For concrete walls, use appropriate anchors (not included).

Diagrams show different wall types and the corresponding mounting hardware.

Safety Information

Always ensure the TV is securely mounted. Do not exceed the maximum weight capacity. Periodically check the mount for tightness and stability.

For more information, visit amazon.com/AmazonBasics.