Product Installation Manual

Important Information

Please read the entire manual before starting to assemble and/or use this product. Follow the manual thoroughly and keep it for further reference.

Assembly Tips:

• Avoid Scratches: Assemble furniture on a soft surface, such as a rug, to prevent scratches.
• Improve Efficiency: Consider having a partner assist with the installation to speed up the process.

Anti-Topple Warning!

Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, ensure you use the wall attachment if included. If not included, please purchase a suitable wall attachment for your wall type. Seek professional advice if unsure. Read and follow each step of the instructions carefully.

Maintenance and Stability:

It is crucial that any product assembled using screws is re-tightened 2 weeks after assembly and every 3 months thereafter to ensure stability throughout its lifespan.

Regular Maintenance:

• For the frame: Use a rag dipped in neutral detergent, wipe clean, and then dry with a clean rag.
• For glass materials: Wipe with a rag dampened with glass cleaner, then dry with a dry rag.

Do not use an electric screwdriver, and do not apply excessive force during installation, as the board is prone to breakage.

Tools Required

• Pencil
• Phillips Head Screwdriver
• Hammer
• Drill

When installing, carefully confirm that each screw corresponds to the manual. Parts with similar shapes can be distinguished by size.

Parts List

Hardware List

Assembly Instructions

Step 1: Prepare Components

Screw eccentric rod (A) into boards 2, 20, 21, and 30.

Attach board 18 to boards 21 and 30. Insert cam lock (C) and tighten clockwise.

Attach board 18 to board 32 and board 20. Attach board 18 and 31 to board 20. Insert cam lock (C) and tighten clockwise.

Step 2: Assemble Base Structure

Fix the four components to board 2 using screw (D). Insert cam lock (C) into boards 18, 31, and 32 and tighten clockwise.

Step 3: Prepare Side Panels

Screw eccentric rod (A) into boards 11, 12, and 3.

Step 4: Attach Shelves to Side Panel

Screw eccentric rod (A) into boards 1, 2, and 10.

Step 5: Assemble Drawer Slides

Insert part (U) into boards 22 and 23. Fix slide rails (CL) and (CR) to boards 22 and 23 with screw (B).

Step 6: Attach Decorative Plate

Attach plate 13 to plates 11 and 12 and secure with hardware (C).

Step 7: Attach Support Brackets

Fix part (F) to boards 10 and 17 with screw (B).

Step 8: Prepare Vertical Panels

Screw eccentric rod (A) into boards 4 and 5.

Step 9: Attach Shelves to Vertical Panel

Attach boards 10, 8, and 17 to board 5. Insert cam lock (C) and tighten clockwise.

Step 10: Connect Vertical Panels

Attach board 4 to boards 10, 8, and 17. Insert cam lock (C) and tighten clockwise.

Step 11: Attach Top and Bottom Panels

Attach boards 11 and 12 to boards 4 and 5. Insert cam lock (C) and tighten clockwise.

Step 12: Insert Back Panel

Insert back board 9 along the grooves.

Step 13: Attach Bottom Panel

Attach board 2 to the bottom. Insert cam lock (C) and tighten clockwise.

Step 14: Attach Drawer Supports

Fix boards 22 and 23 to board 2 with screw (J).

Step 15: Attach Back Support

Flip the cabinet to its back. Attach board 6 to board 10. Insert cam lock (C) and tighten clockwise.

Step 16: Insert Remaining Back Panels

Insert back board 7 along the grooves. Fix board 6 to board 8 using screw (J).

Step 17: Secure Top Panel

Fix board 3 with board 1 using screw (J).

Step 18: Finalize Top Panel Attachment

Attach board 1 to the top. Insert cam lock (C) and tighten clockwise.

Step 19: Assemble Drawer Components

Screw eccentric rod (A) into board 26. Fix handle (O) with screw (H). Fix boards 27, 29, and 28 to board 24 with screw (J).

Step 20: Assemble Drawer Interior

Insert board 25 along the grooves. Attach board 26 to boards 27, 29, and 28. Tighten cam lock (C) clockwise. Fix tracks (DL) and (DR) to boards 28 and 27 respectively with screw (B).

Step 21: Attach Door Hardware

Fix handle (N) to panels 15 and 16 with screw (P). Fix part (G) to panels 15 and 16 with screw (B).

Step 22: Attach Hinges

Fix hinge (E) to panels 15 and 16 with screw (W).

Step 23: Mount Doors

Assemble door panels 15 and 16 to boards 11 and 12 by fixing the hinges with screw (W).

Step 24: Install Drawer

Insert the assembled drawer into the cabinet.

Step 25: Install Anti-Tipping Device

Insert buckle (M) into the back slots and fix with screw (B).

Install the anti-tipping device as shown, securing it to the wall and the furniture.

Anti-Topple Safety

Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install the anti-tip device provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place the heaviest items in the lowest drawers.

This is a permanent label. Do not remove!

Warranty Information

Warranty Claims

• There is a 30-day warranty for broken furniture or other malfunctioning parts. The warranty starts from the date of purchase, verified by proof of purchase.
• Before making a claim, contact customer support. Provide your purchase order number and details of the problem for replacement parts. Replacements will be arranged within 48 hours. If a part is out of stock, you will be notified of the shipping date.
• The product must be used in accordance with the provided instructions.
• For returns due to other reasons, the furniture must be cleaned and dried and returned within 30 days of receipt.

Type of Warranty Claim

• Failure to follow furniture instructions will invalidate the warranty.
• Damage during installation is not covered, but damage during transportation is covered.

Scope of Responsibility

• No responsibility will be borne for misuse, user damage, or loss of parts during installation.
• Damage and scratches to the furniture after use are not covered by the warranty.

Warranty Coverage (US)

• Sheet parts: 1 month from the date of purchase.
• Electrical parts: 1 month from the date of purchase.

Returns and Defective Items

Changed Your Mind?

If you have purchased the item and simply changed your mind, please follow the retailer's instructions for returns.

Defective Items

If your item is defective (e.g., it doesn't work but the cause is unclear), please contact customer support first.

Damaged Items

If you receive an order with obvious shipping damage, it is recommended to refuse the delivery. If delivery is accepted and shipping damage is found later, follow the specific instructions provided by the retailer.

In all circumstances, save all packaging material and paperwork for the order. Disposing of packaging or attempting to return merchandise without contacting the fulfillment center may jeopardize your claim and may result in no credit for the return.

After-Sales Contact

For any after-sales support, please contact: adelahu@fufugaga.com