Assembly Instructions for Adjustable Desk (Model RAAN1247)
Accessories List
- Part 1: One piece, dimensions 18.5 inches (47cm) by 40.5 inches (103cm).
- Part 2: Two pieces, dimensions 4.65 inches (12cm) by 40.2 inches (102cm).
- Part 3: One piece, dimensions 5 inches (12.6cm) by 40.2 inches (102cm).
- Part 4: One piece, dimensions 7 inches (18.1cm) by 20 inches (51cm).
- Part 5: One piece, dimensions 2.4 inches (6cm) by 40.2 inches (102cm).
- Part 6: One piece, dimensions 40.2 inches (102cm) by 20.7 inches (52.5cm).
- Part 7: One piece, dimensions 40.2 inches (102cm) by 18.2 inches (46.2cm) by 20.9 inches (53cm).
- Part 8: One piece, dimensions 40.2 inches (102cm) by 18.2 inches (46.2cm) by 20.9 inches (53cm).
- Part 9: Two pieces, dimensions 2.9 inches (7.3cm) by 18 inches (45.5cm).
- Part 10: Two pieces, dimensions 2.9 inches (7.4cm) by 13.8 inches (35cm).
- Part 11: Two pieces, dimensions 2.9 inches (7.4cm) by 13.8 inches (35cm).
- Part 12: Two pieces, dimensions 18 inches (46.5cm) by 13.6 inches (34.5cm).
- Part 13: Two pieces, dimensions 4.4 inches (11.2cm) by 19.6 inches (50cm).
- Part 14: One piece, dimensions 2.4 inches (6cm) by 47.2 inches (120cm) by 23.6 inches (60cm) by 18.3 inches (46.4cm).
- Part 15: Two pieces, dimensions 2.4 inches (6cm) by 47.2 inches (120cm) by 23.6 inches (60cm) by 18.3 inches (46.4cm).
Hardware List
- Hardware A: 34 + 4 screws, size Ø6mm x 35mm.
- Hardware B: 34 + 4 screws, size Ø6mm x 30mm.
- Hardware C: 25 + 3 screws, size Ø4mm x 38mm.
- Hardware D: 5 screws, size Ø15mm x 10mm.
- Hardware E: 9 + 1 screws, size M6 x 12mm.
- Hardware F: 2 screws.
- Hardware G: 4 + 1 screws, size 60mm x 60mm.
- Hardware H: 12 + 2 screws, size 21mm x 130mm.
- Hardware I: 1 lifting frame.
- Hardware J: 1 lifting frame.
- Hardware L: 12 + 2 screws.
- Hardware M: 1 screw, size Ø5mm x 30mm x 90mm.
In many cases, additional hardware is included as a convenience for your assembly.
Exploded View
Diagram illustrating the overall assembly of the product components, showing how parts fit together before final assembly.
Assembly Steps
Step 1
Fully tighten all the screws.
Connect Part 7 (two instances shown) using twenty pieces of Hardware A. Connect Part 11 (two instances shown) using six pieces of Hardware A.
Step 2
Fully tighten all the screws.
Connect Part 6 (one instance shown) and Part 12 (two instances shown) using six pieces of Hardware A.
Step 3
Fully tighten all the screws.
Connect Part 2 (two instances shown) and Part 13 (two instances shown) using eight pieces of Hardware A.
Step 4
Fully tighten all the screws.
Connect Part 15 (two instances shown) and Part 14 (one instance shown) using eight pieces of Hardware C.
Step 5
Fully tighten all the screws.
Connect Part 3 (one instance shown) and Part 5 (one instance shown) using six pieces of Hardware C.
Step 6
Fully tighten all the screws.
Connect Part 4 (one instance shown) and Part 2 (two instances shown) using seven pieces of Hardware C.
Step 7
Fully tighten all the screws.
Connect Part 10 (two instances shown) and Part 11 (two instances shown) using four pieces of Hardware C.
Step 8
Fully tighten all the screws.
Connect Part 2 (two instances shown) and Part 15 (two instances shown) using two pieces of Hardware B.
Step 9
Fully tighten all the screws.
Connect Part 2 (two instances shown) and Part 15 (two instances shown) using two pieces of Hardware B.
Step 10
Fully tighten all the screws.
Connect Part 4 (one instance shown) and Part 3 (one instance shown) using one piece of Hardware B.
Step 11
Fully tighten all the screws.
Connect Part 5 (one instance shown) and Part 4 (one instance shown) using one piece of Hardware E.
Step 12
Fully tighten all the screws.
Connect Part 3 (one instance shown), Part 6 (one instance shown), and Part 5 (one instance shown) using five pieces of Hardware B.
Step 13
Fully tighten all the screws.
Connect Part 2 (two instances shown) and Part 7 (two instances shown) using four pieces of Hardware B.
Step 14
Diagram shows Part 1 (one instance shown) being attached to Part 2 (two instances shown).
Step 15
Fully tighten all the screws.
Connect Part 3 (one instance shown), Part 6 (one instance shown), Part 5 (one instance shown), Part 7 (two instances shown) using six pieces of Hardware B.
Step 16
Fully tighten all the screws.
Connect Part 8 (one instance shown) using ten pieces of Hardware B.
Step 18
Fully tighten all the screws.
Connect Part 10 (two instances shown) and Part 11 (two instances shown) using eight pieces of Hardware E.
Step 19
Diagram shows Part 12 (two instances shown) and Part 10 (two instances shown) being connected.
Step 20
Fully tighten all the screws.
Connect Part 13 (two instances shown), Part 12 (two instances shown), and Part 10 (two instances shown) using four pieces of Hardware B.
Step 21
Fully tighten all the screws.
Connect Part 13 (two instances shown) using two pieces of Hardware F.
Step 23
Do not fully tighten the screws yet.
Attach Part 14 (one instance shown) using four pieces of Hardware H. Attach the lifting frame (Parts I/J, one instance each) using four pieces of Hardware G.
NOTICE: Please put the board 14 and lifting frame I/J in the correct direction in strict accordance with the description in the steps before assembly. Otherwise, it will lead to the wrong situation that the desktop does not match the main body of the table.
Step 24: Installation A
Do not fully tighten the screws yet.
Attach Part 14 (one instance shown) using eight pieces of Hardware H.
Note: Top board lift locates in the opposite side of the drawers.
Step 25: Installation B
Do not fully tighten the screws yet.
Attach Part 14 (one instance shown) using eight pieces of Hardware H.
Note: Top board lift locates in the same side of the drawers.
Step 26
Fully tighten all the screws.
Attach using twelve pieces of Hardware L.
