VIMAR 46239.040A PT Wi-Fi Camera

1 - Package Content

Illustration showing the camera, power supply with USB cable, a bracket, fixing screws, the quick guide, and a reset pin.

• Telecamera (Camera)
• Alimentatore e cavo USB (Power supply and USB cable)
• Staffa (Bracket)
• Viti di fissaggio (Fixing screws)
• Guida rapida (Quick Guide)
• Pin di reset (Reset pin)

2 - Characteristics

Diagram showing the camera with callouts for its features:

• Lens: 96° field of view, Full HD 1080p resolution.
• Microphone: Ambient microphone to hear what is happening around the camera.
• SD Card Slot: For recording (max 128 GB).
• Reset Button: To restore initial values.
• Status LED: Indicator light.
• Power Connector: For power supply.
• Speaker: To communicate from the App with those close to the camera.

3 - Installation

3.1 - Positioning

Place the camera firmly on a flat surface or use the fixing bracket for ceiling mounting. To prevent overexposed images, avoid installing the camera under backlight or excessive light conditions.

Illustration showing the camera placed on a flat surface and another showing it mounted on a ceiling using the bracket.

4 - Configuration

4.1 - Power up the camera

1. Connect the USB cable to the power port on the camera.
2. Connect the power supply to a wall socket.
3. Wait for the status LED to flash. You will hear spoken feedback: "Camera ON" and then "Camera setup".

4.2 - Install the App on the smartphone

Download the Vimar "VIEW Product" App and install it on your smartphone by searching for it directly in your reference App Store.

4.3 - First access

a) If you already have an account for MyVIMAR: Open the App and log in with your credentials.

b) If not: Create a new account by tapping on the "Create a new account" link. Follow the in-app instructions, enter your credentials, and proceed from step 4.4.

Screenshots of the Vimar app login screen, showing fields for email and password, and options to log in or create a new account.

Status LED Description

• Red light on: Network anomaly.
• Flashing red light: Waiting for network for connection (slow blinking), connecting to the network (fast flash).
• Blue light on: The camera is working correctly.
• Blinking blue light: Awaiting manual Wi-Fi configuration, or currently connecting (faster blinking).

Reset Button

Press and hold for 5 seconds to reset the camera to the initial values.

4.4 - Adding a camera

Follow the on-screen instructions to complete installation and connection to your router. For easier setup, stay close to your router.

Addition via QR Code

Use the camera to scan the QR code displayed on your smartphone. Note: After the camera is switched on, the status LED lights up. After the acoustic signal, the device LED flashes quickly.

Steps:

1. Tap "Add device"
2. Select model
3. Enable next step, follow on-screen instructions
4. Set the Wi-Fi for the device
5. Continue with the procedure to display the QR code.

A QR code will be displayed on your smartphone. Face the phone screen towards the camera at a distance of 15-20 cm from the lens. After a few seconds, a tone will be emitted. Tap on "Tone Emitted" (refer to the images below).

Diagram showing a smartphone displaying a QR code, with the camera positioned at a distance of 15-20 cm from the phone screen. An arrow indicates the phone screen facing the camera.

Wait for connection to be completed. After a few seconds, the device will be successfully added and emit the spoken feedback "Online".

Important Notes

ATTENTION: To safeguard your data and security, if you intend to add the same camera via another account, you must cancel the camera from the App where it is associated. In case of product return, it is also recommended to remove the SD card.

The camera is also compatible with the "Smart Life" application.

For more information, see the complete and updated manuals available in the product sheet on the site: https://faidate.vimar.com/it/it

Specifications

Camera

Power Supply Specifications

Operation Disclaimer for Wi-Fi Cameras

The Wi-Fi camera allows images to be viewed on the buyer's smartphone and/or tablet by simply installing the Vimar VIEW Product application. Image visualization is allowed only through a connection to a home Wi-Fi network with Internet access, which must have the following characteristics:

• IEEE 802.11 b/g/n (2.4 GHz) standard
• Frequency range: 2412-2472 MHz
• Transmitted RF power: <100mW (20dBm)

Operating modes:

• Networks: WEP, WPA and WPA2.
• TKIP and AES encryption protocols are supported for WPA and WPA2 networks.
• "Hidden" networks (hidden SSID) are not supported.

To use the service, the Customer must have technical equipment that allows connection to the Internet and sign an agreement with an ISP (Internet Service Provider); this agreement may involve related costs. Vimar is not responsible for the choice of technical equipment or the agreement with the ISP. Data consumption via the Vimar VIEW Product App, both within the home/building and outside the Wi-Fi network used for installation, remains the responsibility of the Customer.

The interaction and correct remote operation via the Vimar VIEW Product App, through the Internet network of your mobile phone/data provider, with the Wi-Fi camera installed by the Customer may depend on:

• a) type, brand, and model of the smartphone or tablet;
• b) quality of the Wi-Fi signal;
• c) type of the home internet access contract;
• d) type of data contract on the smartphone and tablet.

The camera supports connection via P2P technology; therefore, it is necessary to check that your ISP (Internet Service Provider) does not block it.

Vimar is exempt from any liability for malfunctions due to non-compliance with the minimum technical specifications necessary for the product's operation. For problem resolution, refer to the complete manual and the "Questions and answers" section on the product page at: https://faidate.vimar.com.

Vimar reserves the right to modify the characteristics of the products shown at any time and without notice.

Conformity and Legal Information

Conformity

RED directive. RoHS directive. Standards: EN 301 489-17, EN 300 328, EN 62311, EN 62368-1, EN 55032, EN 55035, EN 61000-3-2, EN 61000-3-3, EN IEC 63000. REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.

Vimar SpA declares that the radio equipment complies with Directive 2014/53/EU. The full text of the EU declaration of conformity, the instruction manual, and the configuration software are available on the product sheet at: https://faidate.vimar.com.

WEEE - Information for users

The crossed-out bin symbol on the equipment or packaging indicates that the product must not be disposed of with other general waste at the end of its working life. The user must take the worn product to a sorted waste center or return it to the retailer when purchasing a new one. Products for disposal can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400m², if they measure less than 25cm. Efficient sorted waste collection for environmentally friendly disposal, or subsequent recycling, helps avoid potential negative effects on the environment and people's health, and encourages the re-use and/or recycling of the construction materials.

Privacy Policy

In accordance with Regulation (EU) 2016/679 on the protection of personal data, Vimar S.p.A. guarantees that electronic data processing minimizes the use of personal and identification information, processing it only when strictly necessary for the stated purposes. Personal data is processed according to the product/application privacy policy available on our website www.vimar.com (legal section: Product - App Privacy Policy - Vimar energia positiva).

Please remember that, pursuant to Regulation (EU) 2016/679, the user is the controller of processing for data collected during product use and is responsible for adopting suitable security measures to protect recorded and stored personal data and avoid its loss.

If the camera monitors public areas, a visible notice about the 'area under video surveillance' as per privacy regulations must be displayed. Recordings may be stored for the maximum period permitted by legal and/or regulatory provisions in the installation location. Users must ensure recordings are deleted in compliance with applicable regulations.

Furthermore, the user must guarantee possession and control of their passwords and related web access codes. When requesting assistance from the Vimar Support Centre, the user must provide the system password for support activities, which constitutes consent for processing. Each user is responsible for changing their system access password after any intervention by the Vimar Support Centre.