AIRROBO Robot Vacuum Cleaner P20 User Manual

Introduction

AIRROBO is a smart home appliance brand focused on AI-enabled technologies. Supported by a world-leading enterprise in humanoid robotics, AIRROBO aims to bring cutting-edge technology to more households globally, making smart homes a new norm of life.

This manual provides comprehensive instructions for the AIRROBO Robot Vacuum Cleaner (referred to as 'robot'). It is strongly recommended to read the user manual thoroughly, including proper use, safety information, and maintenance instructions before using the robot.

For any situations not covered in this manual, please contact customer service at support.airrobo@ubtrobot.com for technical support. Content and images in this manual may be updated without further notice.

Part 1: Important Information

1.1 Before First Use

• Unbox the robot and remove all protective packaging and wrappings. Check if all parts are included.
• Ensure the power outlet is switched on and remove any obstacles from the surroundings. The robot will pass over each floor section multiple times to build a cleaning map.
• Side brushes may occasionally flick small particles, but the robot will eventually pick them up. Empty the dustbin after each use for optimal performance.
• A full dustbin may prevent the robot from cleaning effectively. Clean the dustbin regularly.
• Dispose of or store packaging materials safely. Keep packaging away from infants and children for safety.
• Install the two side brushes in their corresponding positions and fasten them before cleaning.

1.2 WARNING

• Only authorized technicians should dismantle or repair the robot.
• Use only the manufacturer-provided adapter. Incompatible adapters may cause electric shock, fire, or damage.
• Do not touch the plug or adapter with wet hands.
• Clear the floor of fragile items, cables, clothes, tissues, and curtains to prevent entanglement.
• Keep the robot away from cigarettes, lighters, matches, or other flammable materials.
• Do not bend the power cable forcefully or expose it to pressure from heavy or sharp objects.
• The robot is for indoor use only.
• Do not sit on the robot or place objects on it.
• Do not use the robot in wet or damp environments.
• Operate the robot within a temperature range of 0°C to 45°C (32°F to 113°F).
• If using in a suspended environment, use protective fences to prevent falls and potential injury or property damage.
• Turn off the robot if it will be unused for an extended period.
• Inform household members or colleagues when the robot is operating to prevent tripping hazards.
• Disconnect the power supply before removing the battery.
• This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, if they have been given supervision or instruction on safe use and understand the hazards involved. Children should not play with the appliance. Cleaning and user maintenance should not be done by children without supervision.
• Supervise children to ensure they do not play with the appliance.
• Turn off and unplug the robot before performing maintenance on the robot or charging base.

1.3 Battery and Charging

• Do not incinerate the product; the battery may explode even if severely damaged.
• Do not use third-party batteries or charging bases.
• Do not dismantle, repair, or modify the battery and charging base.
• Do not place the charging base near heat sources like heaters.
• Do not wipe or clean the charging base with wet cloths or hands.
• Dispose of old batteries through a professional recycling agency.
• If the power cord is damaged, it must be replaced by a professional technician.
• Ensure the robot is turned off and use original packaging for transportation.
• If unused for an extended period, turn off the robot after fully charging and store it in a cool, dry place. Charge the robot at least once every three months to prevent battery damage from excessive discharge.
• Use the correct tool to remove the battery when needed. Disconnect the power supply before removal. Remove the bottom cover screw, open the cover, unplug the battery connector, and remove the battery.
• Remove the battery before discarding the robot.
• This appliance contains non-replaceable batteries. Dispose of the appliance properly when the battery reaches the end of its life.

Part 2: Product Overview

2.1 Packing List

The package includes:

• Robot Vacuum Cleaner (main brush x 1, dustbin x 1, filter x 1)
• Cleaning brush x 1
• Charging base x 1
• Power adapter x 1
• Remote control x 1 (without AAA batteries)
• User manual x 1
• Filter x 1
• Side brushes x 4
• Warranty card x 1

Main Unit Components:

• Top cover
• Bumper
• Signal window
• Power switch
• Dustbin
• Cliff sensors
• Charging contacts
• Caster wheel
• Battery cover
• Main wheel
• Main brush

Charging Base Components:

• Power indicator
• Signal emission area
• Adapter port
• Charging contacts

Dustbin Components:

• Dustbin cover
• Dustbin release buckle
• HEPA filter

Remote Control Buttons and Functions:

Installation and Use:

• Install two AAA batteries in the remote control battery compartment, ensuring correct polarity. Turn on the power switch on the side of the robot.
• You can operate the robot with the remote control even if it's not connected to Wi-Fi.
• If you press a direction button while the robot is on the charging base, it will pull out, turn 180°, and then you can control it remotely.
• Remove batteries if the remote control will not be used for a long time.

Part 3: Installation and Operation

3.1 Connect the Charging Base

• Assemble the charging base and plug in the adapter.
• Place the charging base against a wall, ensuring approximately 1 meter (3 feet) of clear space on each side and 2 meters (6 feet) in front. The power indicator should be on.

3.2 Charging the Robot for the First Time

• Place the robot on the charging base, aligning the contact points.
• For optimal battery life: Charge for 4-6 hours before first use. The indicator will stop blinking when fully charged.
• The robot will automatically return to the charging base to charge during normal use.
• If the robot is unused for a long period, turn it off after fully charging and store it in a dry, cool environment. Charge it every three months to prevent irreversible battery damage.

3.3 App Download and Wi-Fi Connection

Notes: The AIRROBO app requires a Wi-Fi connection. Ensure your phone and robot are within Wi-Fi range. If connection fails, it might be due to using a 5GHz network; switch to 2.4GHz.

1. Scan the QR code or search for "AIRROBO" in the App Store or Google Play to download the app.
2. Ensure your phone is connected to a 2.4GHz Wi-Fi network and Bluetooth is enabled before downloading.
3. Turn on the robot's power switch. The robot enters configuration mode.
4. Log in to the AIRROBO APP. Create an account if you are a new user.
5. Click "Add device" or [+] to add the robot.
6. Select a 2.4GHz Wi-Fi network and enter the password.
7. Once successfully added, click "Done" to proceed.
8. You can now control the robot via the AIRROBO APP.

3.4 Operation

• Auto Cleaning: The robot plans a zigzag cleaning route and cleans edges. It returns to the charging base automatically upon completion.
• Spot Cleaning: Use the remote or app to place the robot in a specific area. Activate Spot cleaning for a focused zigzag clean of that area.
• Spiral Cleaning: Use the remote or app to place the robot in the center of an area. Activate Spiral cleaning for a spiral pattern clean.
• Edge Cleaning: Activate Edge cleaning to have the robot clean along walls automatically. It returns to the charging base when finished.
• Scheduled Cleaning: Set a cleaning time in the app's settings. The robot will start cleaning at the scheduled time and return to the base afterward.
• Reset Wi-Fi: Press and hold the Clean button and Home button (or the Wi-Fi button on the remote) for 3 seconds to reset Wi-Fi. The Clean button indicator will flash orange. Reconnect in the app.
• Suction Level: Select suction modes (Quiet, Standard, Powerful) via the remote control or app.

Part 4: Specifications

Main Units

Accessories

Part 5: Declaration of Conformity

5.1 FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, try to correct the interference by:

• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and receiver.
• Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consulting the dealer or an experienced radio/TV technician.

5.2 FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

5.3 Statement to Canadian Users

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003. This device complies with RSS-247 of ISEDC.

5.4 IC Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

5.5 WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE) and should not be mixed with unsorted household waste. Dispose of waste equipment at designated collection points. Correct disposal and recycling help prevent negative consequences to the environment and human health.

5.6 EU Declaration of Conformity

Manufacturer: Best Epoch Technology Co., Ltd. declares that the AIRROBO Robot Vacuum Cleaner (Type designation: P20) conforms to relevant Union harmonization legislation, including European Directive (2014/53/EU). The product complies with harmonized standards for health, EMC, radio spectrum, and electrical safety.

Signed for and on behalf of: Best Epoch Technology Co.,LTD.

Name: Lucia Liu

Position: Certification Engineer

Date: May 27, 2022

Contact Information

Best Epoch Technology Co., LTD
Address: 2201, Block C1, Nanshan I Park, No. 1001 Xueyuan Road, Nanshan District, Shenzhen City, China P.R.

Customer Support:

• USA: support.airrobo@ubtrobot.com
• Europe: support-eu@ubtrobot.com
• Japan: support-jp@ubtrobot.com
• Russia: support-ru@ubtrobot.com

Trademarks: Google Play is a trademark of Google, Inc. Apple and the Apple logo are trademarks of Apple, Inc.

Note: The pictures of the product are for reference only and subject to change without notice.