 |
TECWERK Cutting Tool Application Recommendations - Material and Machining Data
Detailed application recommendations from TECWERK for cutting tools, providing tensile strength, cutting speed (Vc), and cooling methods for various materials including steel, stainless steel, non-ferrous metals, and hardened steel. Includes specific data for product 2000 862 279-. |
 |
TECWERK Twist Drill Cutting Data and Application Recommendations
This document provides application recommendations and cutting data for TECWERK twist drills, detailing parameters for various steel types, non-ferrous metals, and hardened steels, including tensile strength and cooling methods. |
 |
TECWERK Cutting Speed and Cooling Recommendations for Machining
This document provides essential cutting speed (Vc) and cooling recommendations for machining various materials, including steels, stainless steels, non-ferrous metals, cast iron, aluminum alloys, and hardened steels. It lists recommended Vc values in m/min and cooling methods (Emulsion, Emulsion/Öl) based on material type and tensile strength where applicable. The data is provided by TECWERK for their drilling products. |
 |
Application Recommendations for Machining Materials
Detailed table of application recommendations and cutting parameters for various materials including steels, cast iron, non-ferrous metals, and superalloys, specifying speed and cooling methods. |
 |
TECWERK NC Counterbore Application Recommendations and Cutting Data
This document provides application recommendations and cutting data for TECWERK NC counterbores, detailing recommended cutting speeds (Vc) and cooling methods for various materials including different grades of steel, stainless steel, cast iron, non-ferrous metals, and hardened steel. |
 |
TECWERK Machining Recommendations: Cutting Speeds and Cooling
A technical data table from TECWERK providing recommended cutting speeds (Vc) and cooling methods for various materials, including different types of steel, cast iron, non-ferrous metals, and superalloys. The table specifies parameters based on tensile strength and material grades. |
 |
TECWERK Cutting Recommendations for NC Countersinks
Application recommendation table for TECWERK NC countersinks, providing cutting speed (Vc) and cooling guidelines for various materials including steel, stainless steel, cast iron, non-ferrous metals, sintered parts, and hardened steel. Includes material tensile strength data. |
 |
Application Recommendations for Machining Materials
Technical guide providing application recommendations for machining various materials, including steel, stainless steel, cast iron, non-ferrous metals, and tempered steel. Details recommended cutting speeds (Vc) and cooling methods for different material grades and hardness levels. |
