| Material | Zugfestigkeit [N/mm²] | Vc [m/min] | Kühlung |
|---|---|---|---|
| Stahl | 500 | 15-30 | Emulsion |
| Rostfreie Stähle | 400 | 10-25 | Emulsion |
| NE-Metalle | <1200 (<HRC38) | 10-25 | Emulsion |
| Saperles | <1600 (<HRC48) | 18-22 | Emulsion |
| GG | 800 | 22-28 | Emulsion |
| GGG | -1200 | 18-22 | Emulsion |
| Al Knotleg Al 51-10% Ca Ms | 45-55 | 22-34 | Emulsion/Öl |
| Stahl gehärtet (HRC 48-57) | 15-30 | Emulsion | |
| Stahl gehärtet (HRC 58-63) | 10-25 | Emulsion |
 |
TECWERK NC Counterbore Application Recommendations and Cutting Data This document provides application recommendations and cutting data for TECWERK NC counterbores, detailing recommended cutting speeds (Vc) and cooling methods for various materials including different grades of steel, stainless steel, cast iron, non-ferrous metals, and hardened steel. |
 |
TECWERK Machining Recommendations: Cutting Speeds and Cooling A technical data table from TECWERK providing recommended cutting speeds (Vc) and cooling methods for various materials, including different types of steel, cast iron, non-ferrous metals, and superalloys. The table specifies parameters based on tensile strength and material grades. |
 |
Application Recommendations for Machining Materials Technical guide providing application recommendations for machining various materials, including steel, stainless steel, cast iron, non-ferrous metals, and tempered steel. Details recommended cutting speeds (Vc) and cooling methods for different material grades and hardness levels. |
 |
TECWERK Cutting Tool Application Recommendations - Material and Machining Data Detailed application recommendations from TECWERK for cutting tools, providing tensile strength, cutting speed (Vc), and cooling methods for various materials including steel, stainless steel, non-ferrous metals, and hardened steel. Includes specific data for product 2000 862 279-. |
 |
TECWERK Countersink Cutting Data and Application Recommendations Comprehensive cutting data and application recommendations for TECWERK countersinks, detailing parameters for various materials including steel, stainless steel, and non-ferrous metals. Includes guidance on tensile strength, cutting speed (Vc), and cooling methods. |
 |
TECWERK Twist Drill Cutting Data and Application Recommendations This document provides application recommendations and cutting data for TECWERK twist drills, detailing parameters for various steel types, non-ferrous metals, and hardened steels, including tensile strength and cooling methods. |
 |
Application Recommendations for Machining Materials Detailed table of application recommendations and cutting parameters for various materials including steels, cast iron, non-ferrous metals, and superalloys, specifying speed and cooling methods. |
 |
TECWERK Cutting Recommendations for NC Countersinks Application recommendation table for TECWERK NC countersinks, providing cutting speed (Vc) and cooling guidelines for various materials including steel, stainless steel, cast iron, non-ferrous metals, sintered parts, and hardened steel. Includes material tensile strength data. |