| Material | Parameter | Stahl N/mm² | Rostfreie Stähle | Neu | NE-Metalle | Stahl gehärtet | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| <800 | <1200 | <1200 (HRC38) | <1600 (HRC48) | <800 | 15 | 8 | GG | 25 | 20 | Al Knetleg | Al Si-10% | Co.Ms | HRC 48-57 | HRC 58-63 | ||
| 2000 862 279- | Zugfestigkeit | 4500 | ||||||||||||||
| Vc (m/min) | 40 | 30 | 10 | 5 | ||||||||||||
| Kühlung | Emulsion | Emulsion | Emulsion/Öl | Emulsion/Öl | Emulsion | Emulsion | Emulsion | Trocken/Luft | Emulsion | Emulsion | Emulsion/Öl | Emulsion/Öl | Emulsion | Emulsion | Emulsion/Öl | |
 |
TECWERK Countersink Cutting Data and Application Recommendations Comprehensive cutting data and application recommendations for TECWERK countersinks, detailing parameters for various materials including steel, stainless steel, and non-ferrous metals. Includes guidance on tensile strength, cutting speed (Vc), and cooling methods. |
 |
TECWERK Cutting Speed and Cooling Recommendations for Machining This document provides essential cutting speed (Vc) and cooling recommendations for machining various materials, including steels, stainless steels, non-ferrous metals, cast iron, aluminum alloys, and hardened steels. It lists recommended Vc values in m/min and cooling methods (Emulsion, Emulsion/Öl) based on material type and tensile strength where applicable. The data is provided by TECWERK for their drilling products. |
 |
TECWERK NC Counterbore Application Recommendations and Cutting Data This document provides application recommendations and cutting data for TECWERK NC counterbores, detailing recommended cutting speeds (Vc) and cooling methods for various materials including different grades of steel, stainless steel, cast iron, non-ferrous metals, and hardened steel. |
 |
TECWERK Twist Drill Cutting Data and Application Recommendations This document provides application recommendations and cutting data for TECWERK twist drills, detailing parameters for various steel types, non-ferrous metals, and hardened steels, including tensile strength and cooling methods. |
 |
TECWERK Machining Recommendations: Cutting Speeds and Cooling A technical data table from TECWERK providing recommended cutting speeds (Vc) and cooling methods for various materials, including different types of steel, cast iron, non-ferrous metals, and superalloys. The table specifies parameters based on tensile strength and material grades. |
 |
Application Recommendations for Machining Materials Detailed table of application recommendations and cutting parameters for various materials including steels, cast iron, non-ferrous metals, and superalloys, specifying speed and cooling methods. |
 |
TECWERK Zentrierbohrer Einsatzempfehlung: Schnittwerte und Kühlung Technische Empfehlungen für TECWERK Zentrierbohrer, einschließlich Schnittgeschwindigkeiten (Vc) und Kühlmitteln für verschiedene Materialien wie Stahl, rostfreie Stähle, Guss und NE-Metalle. |
 |
TECWERK Spiralbohrer DIN 8037 Einsatzempfehlungen und Schnittwerte Finden Sie detaillierte Einsatzempfehlungen und Schnittwerte für TECWERK Spiralbohrer, einschließlich Modelle wie DIN 8037 Typ N HM und DIN 6535 HA, für verschiedene Materialien wie Stahl, rostfreie Stähle und NE-Metalle. |