FPG
FPGWORLD.COM
INLINE 3000 SERIES BAIN MARIE 800 FREESTANDING/CURVED HEATED
Product Overview
Range: INLINE 3000 SERIES BAIN MARIE
Temperature: HEATED
Model: IN-3B08-CU-FF-FS
Front: CURVED/FIXED FRONT
Installation: FREESTANDING
Height: 1261mm
Width: 803mm
Depth: 663mm
Temperature Range: +30°C - +110°C
Recommended Core Product Temperature: +65°C - +80°C
Environmental Test Conditions: 22°C / 65% RH
Features
- High energy efficiency: 0.73 kWh per hour (average).
- Cabinet operating temperature range +30°C - +110°C.
- Recommended core product temperature +65°C - +80°C.
- Smart display with toughened safety glass encased in brushed stainless steel frame.
- Fixed Front Heated Display.
- Fitted with halogen heat lamps, with 3000 hour warm white lighting.
- Supplied with 2x 1/1 gastronorm dishes 65mm deep.
- Extrusion at the top of the cabinet (front only) is fitted with a stainless steel panel that can be replaced with a branded insert.
Operational Excellence
- Sliding doors (staff side) and fixed front (customer side).
- Constructed from stainless and mild steel with toughened safety glass and double-glazed end panels for maximum energy efficiency, climate control, and durability.
- Low wattage density element provides even temperature distribution.
- Dry operation well only.
- Fitted with adjustable 150mm legs (+30mm adjustment).
Options & Accessories
Contact a FPG Sales Representative for our full range, including:
- Add a holding shelf
- Branded decals/insert
- Rear door or end glass mirror application
- Adjustable 100mm legs (+25mm adjustment), lockable castors or unidirectional rollers
- GN pans (various sizes)
- GN dividers
- Forward-facing controls
- Rear deck assemblies
- Custom joinery solution
Heated Data & Electrical Data
Model: IN-3B08-CU-FF-FS
Temperature Range: +30°C - +110°C
Recommended Core Product Temperature: +65°C - +80°C
Environmental Test Conditions: 22°C / 65% RH
Heating: Low wattage density element / 2x 100 watt linear halogen
Model | Voltage | Phase | Current | E24h (kWh) | kWh per hour (average) | IP Rating | Mains Connection | Connection Plug | Heat Lamps | Halogen Lighting Hours | Halogen Lighting Colour |
---|---|---|---|---|---|---|---|---|---|---|---|
IN-3B08-CU-FF-FS | 220-240 V | Single | 4.8 A | 17.52 | 0.73 | IP 22 | 3 metre, 3 core cable | 10 amp, 3 pin plug 1 | 2x 100 watt linear halogen | 3000 | Warm white |
1 Please advise country to change plug specification.
Capacity, Access & Construction
Model | Display Area | No. of 1/1 Pans | Access Front | Access Rear | Chassis Construction |
---|---|---|---|---|---|
IN-3B08-CU-FF-FS | 0.3 m² | 2 | Fixed front | Sliding doors | Stainless 304 and mild steel |
Dimensions
Model | H x W x D mm (Uncrated) | Mass (Uncrated) |
---|---|---|
IN-3B08-CU-FF-FS | 1261 x 803 x 663 | - kg 1 |
1 Crated weights and dimensions vary. Please contact FPG for information on your shipment.
Diagrams:
Plan View: Shows the top-down layout of the appliance, indicating overall width (803mm O/A appliance) and depth (663mm O/A appliance), with a required benchtop cutout dimension of 808mm.
Front Elevation: Displays the front of the unit, showing the overall height (1261mm O/A appliance), the joinery height (652mm), and the depth of the display area (502mm). It also indicates the adjustable leg height (+30mm).
Section View: Illustrates a side cross-section, detailing the internal components and construction, including the display depth (530mm) and the overall depth (663mm).
Rear Elevation: Shows the back of the unit, indicating the cable exit at the base and the cable length (3m).
Installation Note
Model cutout dimensions: IN-3B08-CU-FF-FS models require 808 x 668mm benchtop cutout. Joinery height 652mm (see product manual for installation guide).
Further Information
More information, including technical data and installation guidelines, is available from the Product Manual published on the FPG website.
In line with its policy to continually develop, improve, and support its products, Future Products Group Ltd reserves the right to change specifications and design without notice.
Have a question? Please email FPG at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region.
Sustainability Indicator: The unit features elements that indicate sustainability benefits.
Compliance Marks: AS/NZS Standards, CE, LVD, EMC (These are typically represented by logos in the PDF, here noted as text).