Home - FPG | Food Display Solutions
Contact Us - FPG | Food Display SolutionsContact Us - FPG | Food Display Solutions
User Guide for FPGWORD models including: Inline 3000 Series 1500mm Heated Curved Freestanding Fixed Front, Inline 3000 Series, 1500mm Heated Curved Freestanding Fixed Front, Heated Curved Freestanding Fixed Front, Freestanding Fixed Front, Fixed Front, Front
Inline 3000 Series - FPG | Food Display Solutions
File Info : application/pdf, 2 Pages, 334.64KB
DocumentDocument3000 SERIES 1500 FREESTANDING/CURVED HEATED RANGE TEMPERATURE MODEL FRONT INSTALLATION HEIGHT WIDTH DEPTH INLINE 3000 SERIES HEATED IN-3H15-CU-FF-FS IN-3H15-CU-SD-FS CURVED/ FIXED FRONT CURVED/ SLIDING DOORS FREESTANDING 1261mm 1503mm 663mm TEMPERATURE RANGE RECOMMENDED CORE PRODUCT TEMPERATURE ENVIRONMENTAL TEST CONDITIONS +30°C +90°C +65°C +80°C 22°C / 65% RH FEATURES High energy efficiency: 1.3 kWh per hour (average) Cabinet operating temperature range +30°C - +90°C Recommended core product temperature +65°C - +80°C · Smart display with toughened safety glass encased in brushed stainless steel frame Fixed Front or Sliding Doors Heated Display Three tiltable, height-adjustable stainless steel wire rack shelves are full cabinet width to support maximum display capacity 25,000 hour LED lighting system at 2758 lumens per metre in cabinet top · Unique shelf mounted ticket strip front and rear: 30mm · Extrusion at the top of the cabinet - front only - is fitted with a stainless steel panel that can be replaced with a branded insert Showing : Inline 3000 Series heated 1500mm curved freestanding fixed front Operational Excellence Sliding doors (staff side) and fixed front or sliding doors options (customer side) Constructed from stainless and mild steel with toughened safety glass and double-glazed end panels for maximum energy efficiency, climate control and durability Low wattage density element provides even temperature distribution · Fitted with adjustable 150mm legs (+30mm adjustment) Indicates sustainability benefits Please contact FPG to discuss your requirements for meeting country-specific standards. OPTIONS & ACCESSORIES Contact a FPG Sales Representative for our full range, including: · Shelf trays: Toughened safety glass or mild steel. Colour and woodprint options available for steel shelf trays · Stainless steel product trays with sides · Stainless steel pie chutes · Additional shelf · Ticket strip to base: 30mm · 25,000 hour LED lighting to shelves · Branded decals/insert · Rear door or end glass mirror application · Adjustable 100mm legs (+25mm adjustment), lockable castors or unidirectional rollers · Forward-facing controls · Rear deck assemblies · Custom joinery solution FPGWORLD.COM 3000 SERIES 1500 FREESTANDING/CURVED HEATED HEATED DATA MODEL IN-3H15-CU-XX-FS TEMPERATURE RANGE +30°C +90°C RECOMMENDED CORE PRODUCT TEMPERATURE +65°C - +80°C ENVIRONMENTAL TEST CONDITIONS 22°C / 65% RH HEATING Low wattage density element ELECTRICAL DATA MODEL VOLTAGE PHASE CURRENT E24H (kWh) IN-3H15-CU-XX-FS 220-240 V Single 1Please advise country to change plug specification. CAPACITY, ACCESS & CONSTRUCTION MODEL IN-3H15-CU-FF-FS IN-3H15-CU-SD-FS DISPLAY AREA 1.2 m2 1.2 m2 7.7 A 31.2 LEVELS 3 Shelves 3 Shelves kWh per hour (average) 1.3 IP RATING MAINS CONNECTION CONNECTION PLUG1 IP 20 3 metre, 3 core cable 10 amp, 3 pin plug LED LIGHTING HOURS LUMENS COLOUR 25,000 2758 per metre Natural ACCESS FRONT Fixed front Sliding doors ACCESS REAR Sliding doors Sliding doors CHASSIS CONSTRUCTION Stainless 304 and mild steel Stainless 304 and mild steel DIMENSIONS MODEL H x W x D mm (Uncrated) MASS (Uncrated) IN-3H15-CU-XX-FS 1261 x 1503 x 663 - kg Crated weights and dimensions vary. Please contact us for information on your shipment. Installation note; Model cutout dimensions: IN-3H08-CU-XX-FS models require 1580 x 668mm benchtop cutout. Joinery height 652mm (see product manual for installation guide). 663 O/A APPLIANCE PLAN VIEW 1503 O/A APPLIANCE 1414 SHELF WIDTH 225 285 365 652 JOINERY HEIGHT 74 81 81 76 609 1261 (+30) O/A APPLIANCE 502 150 (+30) ALLOW CUT OUT 1508 FRONT ELEVATION ALLOW CUT OUT 668 SECTION VIEW 30 CABLE EXIT BASE CABLE LENGTH 3m REAR ELEVATION More information including technical data and installation guidelines is available from the Product Manual published on our website. In line with our policy to continually develop, improve and support our products, Future Products Group Ltd reserves the right to change specifications and design without notice. Have a question? Please email us at sales@fpgworld.com or visit www.fpgworld.com for full contact details for your region. 12/24 © 2024 Future Products Group Limited Worldwide contact details: FPGWORLD.COM