FPG Inline 3000 Series 1200 Heated Display Cabinet
FPGWORLD.COM
Product Overview
The FPG Inline 3000 Series 1200 is a freestanding, curved, heated display cabinet designed for commercial food service environments.
Key Specifications
Range | INLINE 3000 SERIES |
---|---|
Temperature | HEATED |
Model | IN-3H12-CU-FF-FS (Curved/Fixed Front), IN-3H12-CU-SD-FS (Curved/Sliding Doors) |
Installation | FREESTANDING |
Height | 1261mm |
Width | 1203mm |
Depth | 663mm |
Temperature Range | +30°C - +90°C |
Recommended Core Product Temperature | +65°C - +80°C |
Environmental Test Conditions | 22°C / 65% RH |
Features
- High energy efficiency: 1.1 kWh per hour (average).
- Smart display with toughened safety glass encased in a brushed stainless steel frame.
- Available in Fixed Front or Sliding Doors configurations.
- Three tiltable, height-adjustable stainless steel wire rack shelves, full cabinet width for maximum display capacity.
- 25,000 hour LED lighting system at 2758 lumens per metre in the cabinet top.
- Unique shelf-mounted ticket strip (30mm) front and rear.
- Extrusion at the top of the cabinet (front only) fitted with a stainless steel panel for branded inserts.
Operational Excellence
- Sliding doors available for staff side, with fixed front or sliding door options for customer side.
- Constructed from stainless and mild steel with toughened safety glass and double-glazed end panels for maximum energy efficiency, climate control, and durability.
- Low wattage density element provides even temperature distribution.
- Fitted with adjustable 150mm legs (+30mm adjustment).
Options & Accessories
- Shelf trays: Toughened safety glass or mild steel (colour and woodprint options available for steel).
- Stainless steel product trays with sides.
- Stainless steel pie chutes.
- Additional shelves.
- Ticket strip to base: 30mm.
- 25,000 hour LED lighting to shelves.
- Branded decals/insert.
- Rear door or end glass mirror application.
- Adjustable 100mm legs (+25mm adjustment), lockable castors, or unidirectional rollers.
- Forward-facing controls.
- Rear deck assemblies.
- Custom joinery solutions.
Technical Data
Heated Data
Model | IN-3H12-CU-XX-FS |
---|---|
Temperature Range | +30°C - +90°C |
Recommended Core Product Temperature | +65°C - +80°C |
Environmental Test Conditions | 22°C / 65% RH |
Heating | Low wattage density element |
Electrical Data
Model | IN-3H12-CU-XX-FS |
---|---|
Voltage | 220-240 V |
Phase | Single |
Current | 7.2 A |
E24H (kWh) | 26.4 |
kWh per hour (average) | 1.1 |
IP Rating | IP 20 |
Mains Connection | 3 metre, 3 core cable |
Connection Plug | 10 amp, 3 pin plug (Note: Plug specification may vary by country) |
LED Lighting Hours | 25,000 |
LED Lighting Lumens | 2758 per metre |
LED Lighting Colour | Natural |
Capacity, Access & Construction
Model | Display Area | Levels | Access Front | Access Rear | Chassis Construction |
---|---|---|---|---|---|
IN-3H12-CU-FF-FS | 1.0 m² | 3 Shelves | Fixed front | Sliding doors | Stainless 304 and mild steel |
IN-3H12-CU-SD-FS | 1.0 m² | 3 Shelves | Sliding doors | Sliding doors | Stainless 304 and mild steel |
Dimensions
Model | IN-3H12-CU-XX-FS |
---|---|
H x W x D mm (Uncrated) | 1261 x 1203 x 663 |
Mass (Uncrated) | - kg (Crated weights and dimensions vary) |
Diagrams and Installation Notes
Detailed dimensional drawings are provided for installation planning:
- Plan View: Illustrates the top-down layout, showing the overall appliance width (1203mm), shelf width (1114mm), and required benchtop cutout dimensions (1208mm width, 668mm depth).
- Front Elevation: Depicts the front of the unit, indicating the overall appliance height (1261mm), adjustable leg height (150mm with +30mm adjustment), and shelf positions at 225mm, 285mm, and 365mm from the base.
- Section View: Provides a side profile, showing the cabinet depth (663mm), joinery height requirement (652mm), and cable management details (3m cable length, exit base).
- Rear Elevation: Shows the rear of the unit, highlighting cable exit points and length.
Installation requires a benchtop cutout of 1208 x 668mm with a joinery height of 652mm. Refer to the product manual for detailed installation guidelines.
Compliance and Sustainability
The product features indicators for sustainability benefits, and complies with relevant standards such as ASNZ and CE.