FPG Inline 5000 Series 1200 Freestanding/Square Heated Display
Model Series: INLINE 5000 SERIES
Product Type: Heated Display Unit
Manufacturer: FPG (Future Products Group Ltd)
Key Specifications
Specification | Details |
---|---|
Range | INLINE 5000 SERIES |
Temperature | HEATED |
Model Variants | IN-5H12-SQ-FF-FS (Fixed Front) / IN-5H12-SQ-SD-FS (Sliding Doors) |
Front Type | SQUARE / FIXED FRONT or SQUARE / SLIDING DOORS |
Installation Type | FREESTANDING |
Overall Height | 1443mm |
Overall Width | 1207mm |
Overall Depth | 770mm |
Temperature Range | +55°C - +95°C |
Recommended Core Product Temperature | +65°C - +80°C |
Environmental Test Conditions | 22°C / 65% RH |
Heating System | Low wattage density element |
Features
- High energy efficiency: 2.08 kWh per hour (average)
- ✔️ Cabinet operating temperature range +55°C - +95°C
- ✔️ Recommended core product temperature +65°C - +80°C
- Smart display with double-glazed glass finished with a black trim
Display Options & Operational Excellence
Display Configuration:
- Three tiltable, height-adjustable stainless steel wire rack shelves are full cabinet width to support maximum display capacity.
- Unique shelf mounted ticket strip front and rear: 30mm.
Lighting:
- 25,000 hour LED lighting system at 2758 lumens per metre in cabinet top and to each shelf.
Operational Features:
- Sliding doors (staff side) and fixed front or sliding doors options (customer side).
- ✔️ Constructed from stainless and mild steel with fully double-glazed, toughened safety glass for maximum energy efficiency, climate control, and durability.
- ✔️ Low wattage density element provides even temperature distribution.
- Designed to be installed into joinery.
- Fitted with adjustable 150mm legs (+30mm adjustment).
Electrical Data
Model | Voltage | Phase | Current | E24H (kWh) | kWh per hour (average) | IP Rating | Mains Connection | Connection Plug | LED Lighting Hours | LED Lighting Lumens | LED Lighting Colour |
---|---|---|---|---|---|---|---|---|---|---|---|
IN-5H12-SQ-XX-FS | 220-240 V | Single | 13.6 A | 49.92 | 2.08 | IP 22 | Fixed wiring¹ | N/A | 25,000 | 2758 per metre | Natural |
¹ Please see the product manual for more information.
Capacity, Access & Construction
Model | Display Area | Levels | Access Front | Access Rear | Chassis Construction |
---|---|---|---|---|---|
IN-5H12-SQ-FF-FS | 1.4 m² | 3 Shelves | Fixed front | Sliding doors | Stainless 304 and mild steel |
IN-5H12-SQ-SD-FS | 1.4 m² | 3 Shelves | Sliding doors | Sliding doors | Stainless 304 and mild steel |
Dimensions & Weight
Model | Height x Width x Depth (mm, Uncrated) | Mass (kg, Uncrated) |
---|---|---|
IN-5H12-SQ-XX-FS | 1443 x 1207 x 770 | 154 |
Crated weights and dimensions vary. Please contact FPG for shipment information.
Installation & Cutout Dimensions:
- Model cutout dimensions for IN-5H12-SQ-XX-FS models require a 1160mm width x 725mm depth benchtop cutout.
- Joinery height requirement: 603mm.
- Refer to the product manual for detailed installation guides.
Diagrammatic Dimensions:
- Plan View: Overall appliance width is 1207mm. Shelf width is 1130mm. Base width is 1070mm. Overall appliance depth is 770mm.
- Front Elevation: Overall appliance height is 1443mm (with an additional +30mm adjustment from legs). The base height is 453mm from the floor. The appliance depth at the base is 770mm.
- Section View: Shelf heights from base are approximately 390mm, 420mm, 450mm, and 538mm. The cut-out depth required is 725mm.
- Rear Elevation: A cable exit is located at the base, measuring 255mm from the side. The cable length is 3m.
Options & Accessories
Contact an FPG Sales Representative for a full range of options, including:
- Shelf trays: Toughened safety glass or mild steel. Colour and woodprint options available for steel shelf trays.
- Stainless steel product trays with three sides.
- Stainless steel pie chutes.
- Additional shelves.
- Ticket strip to base: 30mm.
- Branded decals.
- Rear door or end glass mirror application.
- Adjustable 100mm legs (+25mm adjustment), lockable castors or unidirectional rollers.
- External stainless steel chassis surround.
- Rear deck assemblies.
- Custom joinery solution.
Sustainability & Compliance
? Indicates sustainability benefits
Please contact FPG to discuss your requirements for meeting country-specific standards.