Hover-1 Dream Electric Hoverboard

Operation Manual H1-DRM

Safety First: Helmets Save Lives!

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when riding your E-Scooter.

Correct Fit: Make sure your helmet covers your forehead.

Incorrect Fit: Forehead is exposed and vulnerable to serious injury.

Important Warnings and Precautions

⚠️ WARNING!

PLEASE READ THE OPERATION MANUAL THOROUGHLY. Failure to follow the basic instructions and safety precautions listed in the operation manual can lead to damage to your Dream, other property damage, serious bodily injury, and even death.

Thank you for purchasing the Hover-1 Dream electric hoverboard. Please read all instructions carefully before using and retain this manual for future reference.

ATTENTION

  1. Use only the supplied charger from Hover-1 with this hoverboard.
  2. The operating temperature range of the Dream is 32°F - 104°F (0°C - 40°C).
  3. Do not ride on icy or slippery surfaces.
  4. Read the operation manual and warning labels before riding.
  5. Store the Dream in a dry, ventilated environment.
  6. When transporting the Dream, avoid violent crashes or impact.

Low Temperature Warning

Low temperatures will affect the lubrication of moving parts inside the Dream hoverboard, increasing internal resistance. Additionally, the discharge capacity and the capacity of the battery will be significantly decreased.

Use caution when riding the Dream in cold temperatures (below 40°F/4°C). Doing so may increase the risk of mechanical failures of the hoverboard, which may lead to damage to your Dream, other property damage, serious bodily injury, and even death.

Safety Instructions

Important Symbols

Serial Number

Please keep your serial number on file for warranty claims as well as proof of purchase.

⚠️ WARNING

Prolonged Exposure to UV rays, rain, and the elements may damage the enclosure materials. Store indoors when not in use.

Introduction

The Dream hoverboard is a personal transporter. Our production processes are developed with strict testing for each hoverboard. Operating the hoverboard without following the contents of this manual may lead to damage to your hoverboard or bodily injury.

Package Contents

Features and Parts

Diagram showing the Hover-1 Dream hoverboard with numbered parts:

Operating Principals

The Dream uses digital electronic gyroscopes and acceleration sensors to control balance and motion, depending on the user's center of gravity. The Dream also uses a control system to operate the motors that are located within the wheels. The Dream has a built-in inertia dynamic stabilization system that can assist with balance when moving forward and backward, but not while turning.

TIP: To increase your stability, you must shift your weight in order to overcome the centrifugal force during turns, especially when entering a turn at higher speeds.

Specifications

SpecificationDetails
Net Weight13.86 lbs (6.3 kg)
Max Supported Weight220 lbs (100 kg)
Min Supported Weight44 lbs (20 kg)
Motor400W (dual 200W motors)
Max SpeedUp to 7 mph (11.2 km/h)
Max RangeUp to 6 miles (9.6 km)
Max Incline Angle10°
Min Turning Radius
Charge TimeUp to 6 hours
Battery TypeLithium-ion
Battery Voltage25.2V
Battery Capacity4Ah
Power RequirementAC 100V-240V, 50Hz/60Hz
Ground Clearance1 Inch (2.54 cm)
Tire Size6.5 Inches (16.51 cm)
Tire TypeNon-pneumatic solid tires
UL CertificationUL2272 certified

Controls and Display

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY

Turning Your Device On/Off

Power On: Place your Dream flat on the floor and press the power button (located on the rear of your Dream) once. Check the LED indicator (located in the center of your Dream). The battery indicator should be lit, indicating the Dream is powered on.

Power Off: Press the power button once.

Mat Sensors

There are four sensors under the foot mats of your Dream.

When riding the hoverboard, you must ensure you are stepping on the foot mats. Do not step or stand on any other area of your hoverboard.

The hoverboard may vibrate or spin in one direction if weight and pressure are applied to only one foot mat.

Battery Indicator

The display board is located in the middle of the Dream.

  • A green LED Light indicates the hoverboard is fully charged.
  • A red flashing LED light and beeping indicates low battery.
  • A yellow flashing LED light indicates the hoverboard is charging.

When the LED light turns red, please recharge the Dream.

Running Indicator

When the operator triggers the foot mats, the running indicator LED will light up, which means that the hoverboard has entered the running state.

When the hoverboard encounters an error during operation, the running LED light will turn red (for more details, see "SAFETY ALERTS" on page 18).

Before Riding

It is important that you fully understand all functions of your Dream. If these functions are not used correctly, you will not have full control of your Dream.

Practice using these elements of your Dream at slower speeds in a flat, open area before taking the Dream out into public areas.

Pre-Ride Checklist

Ensure that your Dream is in proper working order each time you ride. If a part of the hoverboard does not function correctly, please contact Hover-1 Customer Support.

⚠️ WARNING

Any Dream that does not work properly can cause you to lose control and fall. Do not ride a Dream with a part that is damaged. Replace the damaged part before riding.

  • Ensure the battery is fully charged before riding your hoverboard.
  • Please wear all appropriate safety gear before operating your hoverboard.
  • Make sure to wear comfortable clothes and flat, closed-toe shoes when operating your hoverboard.

Safety Precautions

Different localities and countries have different laws about riding electric transportation devices on public roads. You should check with local officials to ensure you are complying with these laws.

Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations.

⚠️ WARNING

When you ride in low-visibility conditions such as fog, dusk, or night, you might be difficult to see, which could lead to a collision. Wear bright, reflective clothing when riding in low-visibility conditions.

⚠️ WARNING

When a hoverboard and a kart attachment (sold separately) are being used together, it is NOT ADVISABLE to ride the combo uphill. If you attempt to ride on a steep incline above 5-10°, a safety mechanism built into the hoverboard will activate, which will shut down your hoverboard automatically. If this happens, dismount your hoverboard, place it on a flat surface, wait 2 minutes, then power your hoverboard on again.

⚠️ WARNING

To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools, or other bodies of water. Always wear shoes and never allow more than one rider at a time.

Riding Your Dream

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS MAY LEAD TO DAMAGE TO YOUR DREAM, DAMAGE TO PROPERTY, VOID YOUR MANUFACTURER WARRANTY, AND MAY CAUSE SERIOUS BODILY INJURY OR DEATH.

Before using your Dream, be sure to familiarize yourself with the operating procedures.

Operating Your Dream

Make sure the Dream is fully charged before initial use. For charging instructions, please refer to "CHARGING YOUR DREAM" on page 19.

Stand directly behind your Dream and place one foot on the corresponding foot mat. Keep your weight on the foot that is still on the ground, otherwise the Dream may begin to move or vibrate, making it difficult to step on evenly with your other foot. When you are ready, shift your weight to the foot already placed on the Dream and step on with your second foot quickly and evenly.

Diagram showing mounting: Foot on ground, then second foot on hoverboard.

? NOTES:

Stay relaxed and step on quickly, confidently, and evenly. Imagine climbing stairs, one foot, then the other. Look up once your feet are even. The hoverboard may vibrate or spin in one direction if weight and pressure are applied to only one foot mat. THIS IS NORMAL.

Find your center of gravity. If your weight is distributed correctly on the foot mats and your center of gravity is level, you should be able to stand on your Dream just as if you were standing on the ground. On average, it takes 3-5 minutes just to get comfortable standing on your Dream and maintaining proper balance. Having a spotter will help you feel more secure. The Dream is an incredibly sensitive device; it senses even the slightest bit of motion. Having any anxiety or reservation about stepping on may cause you to panic and trigger unwanted movement.

When you first begin using your Dream, the fastest way to move in your desired direction is to focus in that direction. You will notice that just thinking about which way you would like to go will shift your center of gravity, and that subtle movement will propel you in that direction.

Your center of gravity determines which direction you move and your speed. Stand straight up to come to a complete stop. Tilt your center of gravity in the direction you wish to move.

To turn, focus on the direction you wish to turn and stay relaxed. Apply pressure on your right foot to turn right and apply pressure on your left foot to turn left.

⚠️ WARNING

To avoid danger, do not turn sharply or at high speeds. Do not turn or ride quickly along slopes, as it may cause injury.

As you get comfortable on the Dream, you will notice it becomes easier to maneuver. Remember at higher speeds, it is necessary to shift your weight when making turns to maintain your stability.

Bend your knees if you encounter bumps or uneven surfaces, then dismount and carry your hoverboard to a safe operating surface.

Diagram showing body posture for movement: Left image shows leaning back for "Move Backward", middle image shows upright for "Stop", right image shows leaning forward for "Move Forward".

Dismounting and Limitations

? NOTES:

Try staying relaxed and focus on finding your center of gravity to maintain full control of your Dream.

Dismounting your hoverboard can be one of the easiest steps, yet when done incorrectly, may cause you to fall. To properly dismount from a stopped position, lift your dominant leg up and set your foot down on the ground behind you (STEP BACK). Then, step off the hoverboard with your other foot.

Diagram showing dismounting: Hoverboard stopped, one foot lifts off, then second foot lifts off.

⚠️ WARNING

Make sure to lift your feet completely off the foot mat to clear the hoverboard when stepping back to dismount. Failure to do so may send the hoverboard into a tailspin.

Speed and Weight Limitations

Speed and weight limits are set for your own safety. Please abide by the limits listed here in the manual.

  • Maximum Speed: 7 mph
  • Maximum Weight: 220 lbs
  • Minimum Weight: 44 lbs

Operating Range and Calibration

⚠️ WARNING

Riding the Dream while exceeding the weight limit may increase the possibility of injury or product damage.

? NOTES:

When max speed is reached, the Dream will beep to alert the user and tilt the rider slowly back to prevent injury.

Operating Range

The Dream can travel up to 6 miles on a fully charged battery under ideal conditions. The following are some of the major factors that will affect the operating range of your Dream:

  • Terrain: Operating range is highest when riding on a smooth, flat surface. Riding uphill and/or on rough terrain will reduce operating range significantly.
  • Weight: A lighter user will have a higher operating range than a heavier user.
  • Ambient Temperature: Please ride and store the Dream in recommended temperatures. This will increase operating range, battery life, and overall performance of your Dream.
  • Speed and Riding Style: Maintaining a moderate and consistent speed while riding produces maximum operating range. Traveling at high speeds for extended periods of time, frequent starts and stops, and idling will decrease overall operating range.

Balance & Calibration

If your Dream is unbalanced, vibrating, or not turning properly, you can follow the steps below to calibrate it:

  1. First, place the Dream on flat ground or the floor. The foot mats should be even with each other and not tilted forward or backward. Make sure the charger is not plugged in and the hoverboard is turned off.
  2. Press and hold the power button for a total of 10-15 seconds. The hoverboard will turn on, and the battery indicator will light up.
  3. After the light flashes 5 times consecutively, you may release the power button. Turn the hoverboard off and then back on. Calibration is now complete.

Safety Alerts

If a system error occurs or an improper operation is performed while riding the Dream, the device will alert the user in a variety of ways.

You will notice the running indicator light will turn red and you will hear a beep sound, alerting you to take precaution and cease operation. The hoverboard may stop suddenly.

The following are common occurrences that will produce safety alerts. These notices should not be ignored, and appropriate action should be taken to correct any improper operation, failure, or errors:

Charging Your Dream

⚠️ WARNING

When the Dream turns off during a safety alert, all operation systems will halt. Do not attempt to ride the Dream when the system initiates a stop. Turn your Dream off and back on to unlock it from a safety lock.

Battery Care / Maintenance

Battery Specifications

Battery Maintenance

⚠️ WARNING

Failure to follow the safety precautions listed below could lead to serious bodily injury or death.

⚠️ WARNING

SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS EMITTED FROM THE BATTERY.

Care & Maintenance

⚠️ WARNING

Avoid using water or other liquids for cleaning. If water or other liquids enter the Dream, it will cause permanent damage to the internal components.

⚠️ WARNING

Users who disassemble the Dream without permission from Hover-1 will void the warranty.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Instructions for a Class B Digital Device or Peripheral

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warranty

For warranty information, please visit us at: www.hover-1.com

Manufacturer: DGL Group, Ltd.
2045 Lincoln Highway, Edison, NJ 08817
TEL: 732-692-5000

Affix Serial Number Label Here:

Connect with Hover-1

Models: H1-DRM, Dream, Hoverboard, H1-DRM Dream, Dream Hoverboard, H1-DRM Hoverboard, H1-DRM Dream Hoverboard

File Info : application/pdf, 25 Pages, 1.19MB

PDF preview unavailable. Download the PDF instead.

H1-DRM-Manual-10252022 cd29fc6c-0089-4bbe-b235-b73ccb3a77c0 ?v=1668704120

References

Adobe PDF library 15.00 Adobe Illustrator 25.2 (Macintosh)

Related Documents

Preview Hover-1 Dream Electric Hoverboard: Operation Manual & Safety Guide
Comprehensive operation manual for the Hover-1 Dream electric hoverboard, covering safety instructions, operating principles, specifications, maintenance, and troubleshooting. Learn how to ride safely and maintain your hoverboard.
Preview Hover-1 Ranger Electric Scooter Operation Manual
Comprehensive operation manual for the Hover-1 Ranger electric scooter, covering safety precautions, operating instructions, specifications, charging, battery care, Bluetooth pairing, app usage, and troubleshooting.
Preview Hover-1 Dream Electric Hoverboard Operation Manual
Comprehensive operation manual for the Hover-1 Dream electric hoverboard, covering safety precautions, operating principles, specifications, controls, maintenance, and troubleshooting.
Preview Hover-1 Origin Operation Manual: Safety, Features, and Riding Guide
Comprehensive operation manual for the Hover-1 Origin electric scooter, covering safety precautions, operating principles, controls, Bluetooth features, riding techniques, charging, maintenance, and troubleshooting.
Preview Hover-1 EPSILON Electric Hoverboard Operation Manual | Safety, Specs, and Riding Guide
Comprehensive operation manual for the Hover-1 EPSILON electric hoverboard. Learn about safety precautions, specifications, controls, Bluetooth pairing, charging, maintenance, and troubleshooting.
Preview Hover-1 Nova Electric Scooter Operation Manual - Safety, Specs, and Riding Guide
Comprehensive operation manual for the Hover-1 Nova electric scooter. Learn about safety precautions, specifications, controls, riding techniques, charging, maintenance, and troubleshooting.
Preview Hover-1 Max Electric Scooter Operation Manual
This operation manual provides comprehensive safety guidelines, operating instructions, specifications, and maintenance information for the Hover-1 Max electric scooter.
Preview Hover-1 Sypher Electric Hoverboard Operation Manual
This operation manual provides comprehensive instructions for the Hover-1 Sypher electric hoverboard, covering safety guidelines, operating principles, features, maintenance, and specifications. Learn how to safely ride, charge, and care for your Sypher hoverboard.