Redmi Pad SE 8.7 Quick Start Guide

Getting Started

Thank you for choosing the Redmi Pad SE 8.7. To turn on the device, long press the power button. Follow the on-screen instructions to configure your device.

For more information, visit the official website: www.mi.com/global/service/userguide

Device Overview

The Redmi Pad SE 8.7 features the following external components:

• SD Card Tray
• Volume Buttons
• Power Button
• USB Type-C Port

Diagram Description: A diagram showing the front, side, and bottom views of the Redmi Pad SE 8.7 tablet, with labels pointing to the SD Card Tray, Volume Buttons, Power Button, and USB Type-C Port.

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks. Use only authorized accessories compatible with your device.
• The device's operating temperature range is 0°C to 40°C. Using the device outside this range may cause damage.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damage.
• Charge the device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage.
• After charging, disconnect the adapter. Do not charge for more than 12 hours.
• Batteries must be recycled or disposed of separately from household waste. Mishandling may cause fire or explosion. Dispose of or recycle the device, battery, and accessories according to local regulations.
• Do not disassemble, hit, crush, or burn the battery. If deformed or damaged, stop using immediately.
• Do not short circuit the battery, as this may cause overheating, burns, or other injury.
• Do not place the battery in high-temperature environments. Overheating may cause explosion.
• User shall not remove or alter the battery; only authorized repair centers should perform this.
• Keep your device dry.
• Do not attempt self-repair. Contact customer support or an authorized repair center for issues.
• Connect other devices according to their manuals; do not connect incompatible devices.
• For AC/DC adapters, the socket-outlet should be near the equipment and easily accessible.

Safety Precautions

• Observe all applicable laws and rules restricting tablet use in specific situations and environments.
• Do not use the tablet at petrol stations, in explosive atmospheres, or areas with chemicals or particles like grain, dust, or metal powders. Obey signs to turn off wireless devices.
• Do not use the tablet in hospital operating rooms, emergency rooms, or intensive care units. Comply with all hospital rules. If you have a medical device, consult your doctor and the manufacturer. Maintain a minimum distance of 15 cm between the tablet and a pacemaker. Avoid use near hearing aids or cochlear implants.
• Observe aircraft safety regulations and turn off the tablet on board aircraft when required.
• When driving, use the tablet in accordance with traffic laws.
• To avoid lightning strikes, do not use the tablet outdoors during thunderstorms.
• Do not use the tablet in high humidity places like bathrooms, as this may cause electric shock, injury, fire, or charger damage.
• Connect the "Redmi Pad SE 8.7" to a computer using a USB data cable. Use the included USB cable with a Mi brand charger.
• Third-party chargers must comply with USB2.0 or higher standards and relevant safety standards (IEC 60950, IEC 62368-1).
• The product supports chargers with a maximum output of 18W (max voltage 9V, max current 2A). Using other chargers may damage the product and cause safety risks.

Regulatory Information

WEEE (Waste Electrical and Electronic Equipment)

Special precautions must be taken to safely dispose of this product. This marking [[WEEE Symbol]] indicates it may not be discarded with other household waste in the EU. Recycle responsibly to prevent harm to the environment and human health. Use return and collection systems or contact the retailer for safe recycling.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

Additional safety information and precautions can be accessed at: www.mi.com/en/certification

EU Regulations

Xiaomi Communications Co., Ltd. [[Xiaomi Logo]] declares that this Tablet with Bluetooth and Wi-Fi 24075RP89G complies with essential requirements and provisions of RE Directive 2014/53/EU. The full text of the EU declaration of conformity [[CE Mark]] is available at: www.mi.com/en/certification

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk: limit: 2.0W/kg) as specified by Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, the device transmitted at its highest certified power level in all tested frequency bands.

When attaching the device near the body, use a belt clip or holster without metallic components. RF exposure compliance was not tested or certified with metallic accessories worn on the body, so such accessories should be avoided.

Certification Information (Highest SAR): SAR 10 g limit: 2.0 W/Kg, SAR Value: Body: 0.995 W/Kg (0 mm distance).

Legal Information

This device may be operated in all EU member states. Observe national and local regulations where the device is used.

This device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in: AT, BE, BG, HR, CY, CZ, DK, EE, FI, FR, DE, EL, HU, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, SI, ES, SE, UK(NI), IS, LI, NO, CH, TR.

This device is restricted to indoor use only when operating in the 5150 to 5350MHz in Hong Kong.

Wi-Fi connectivity may vary based on regional availability and local network support. Functions may be added via OTA.

Restrictions in the 2.4 GHz band: Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Frequency Bands and Power

This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power:

• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm

FCC Regulations

This tablet complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This tablet has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)

This device meets government requirements for exposure to radio waves. The exposure standard for wireless devices employs Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets FCC RF exposure guidelines for use with an accessory that contains no metal. RF exposure compliance with any body-worn accessory that contains metal was not tested or certified, and use of such an accessory should be avoided.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.

UK Regulations

Regulations 2017 (SI 2017/1206) Declaration of Conformity

Xiaomi Communications Co., Ltd. [[Xiaomi Logo]] declares that this Tablet with Bluetooth and Wi-Fi 24075RP89G is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). The full text of the UK declaration of conformity [[UKCA Mark]] is available at: www.mi.com/en/certification

RF Exposure Information (SAR)

This device is in compliance with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206).

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands.

When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR): SAR 10 g limit: 2.0 W/Kg, SAR Value: Body: 0.995 W/Kg (0 mm distance).

Legal Information

Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in the UK.

This device is restricted to indoor use only when operating in the 5150 to 5350MHz in Hong Kong.

Wi-Fi connectivity may vary based on regional availability and local network support. Functions may be added via OTA.

Please ensure the used power adapters are compliant with applicable country regulations and international and regional safety standards.

E-label

This device has an electronic label for certification information. To access it, please go to Settings > About tablet > Certification, or open Settings and type "Certification" into the search bar.

Disclaimer

This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide. Please see details at www.mi.com/global/service/userguide. All illustrations are for illustration purposes only and may not accurately depict the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: Redmi

Model: 24075RP89G

© Xiaomi Inc. All rights reserved.

Manufacturer's Authorized UK Representative: Xiaomi Technology UK Limited, Address: 100 Brook Drive Green Park, Unit Part Ground Floor, North Wing, Reading, England, RG2 6UJ