Xiaomi Pad 7 Pro Quick Start Guide

Introduction

Thank you for choosing the Xiaomi Pad 7 Pro. To turn on the device, long press the power button. Follow the on-screen instructions to configure your device. For more information, visit the official website: www.mi.com/global/service/userguide.

WEEE Information

Special precautions must be taken for the safe disposal of this product. The WEEE symbol indicates that this product may not be discarded with other household waste in the EU. To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

Caution

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage, do not listen at high volume levels for long periods. Additional safety information and precautions can be accessed at: www.mi.com/en/certification.

Important Safety Information

Read all safety information below before using your device:

• Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
• Use only authorized accessories compatible with your device.
• The device's operating temperature range is 0°C to 40°C. Using the device outside this range may cause damage.
• If your device has a built-in battery, do not attempt to replace it yourself to avoid damage.
• Charge this device only with an authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage.
• After charging, disconnect the adapter from the device and power outlet. Do not charge for more than 12 hours.
• The battery must be recycled or disposed of separately from household waste. Mishandling may cause fire or explosion. Dispose of or recycle the device, battery, and accessories according to local regulations.
• Do not disassemble, hit, crush, or burn the battery. Stop using immediately if the battery appears deformed or damaged.
• Do not short-circuit the battery, as this may cause overheating, burns, or injury.
• Do not place the battery in a high-temperature environment, as overheating may cause explosion.

Safety Precautions

• Observe all applicable laws and rules restricting tablet use in specific situations and environments.
• Do not use your tablet at petrol stations or in any explosive atmosphere or potentially explosive environment, including fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air may contain chemicals or particles such as grain, dust, or metal powders. Obey all posted signs to turn off wireless devices. Turn off your tablet or wireless device when in a blasting area or in areas requiring "two-way radios" or "electronic devices" to be turned off to prevent potential hazards.
• Do not use your tablet in hospital operating rooms, emergency rooms, or intensive care units. Always comply with hospital and health center rules and regulations. If you have a medical device, consult your doctor and the device manufacturer regarding potential interference. To avoid potential interference with a pacemaker, maintain a minimum distance of 15 cm between your tablet and the pacemaker. To avoid interference with medical equipment, do not use your tablet near hearing aids, cochlear implants, or similar devices.
• Observe all aircraft safety regulations and turn off your tablet on board aircraft when required.
• When driving, use your tablet in accordance with relevant traffic laws and regulations.
• To avoid being struck by lightning, do not use your tablet outdoors during thunderstorms.
• Do not use your tablet in places with high humidity, such as bathrooms, as this may result in electric shock, injury, fire, and charger damage.
• Connect the "Xiaomi Pad 7 Pro" to a computer using a USB data cable. Use the included USB cable with a Mi brand charger and connect to a power strip.
• You can also use any third-party charger that complies with USB2.0 or higher protocol standards and meets the requirements of International Information Technology Equipment Safety Standard (IEC 60950), Audio/video, Information and Communication Technology Equipment Standard (IEC 62368-1), and relevant laws and regulations of your country or region.
• The product allows the use of chargers with a maximum output of 67W. The maximum voltage shall not exceed [20 V] and the maximum current shall not exceed [6.3A]. Using other chargers that do not meet these requirements may damage the product and affect personal or property safety.

Security Statement

Please update your tablet's operating system using the built-in software update feature, or visit an authorized service outlet. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity

Xiaomi Communications Co., Ltd. hereby declares that this Tablet with Bluetooth and Wi-Fi 24091RPADG is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: www.mi.com/en/certification.

RF Exposure Information (SAR)

This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU). During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands. When attaching the device near the body, use a belt clip or holster that does not contain metallic components. RF exposure compliance was not tested or certified with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Legal Information

This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device is restricted to indoor use only when operating in the 5250 to 5350 MHz, 5945 to 6425MHz frequency range in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU, IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR. Wi-Fi connectivity (including Wi-Fi frequency bands, Wi-Fi standards and other features as ratified in IEEE Standard 802.11 specifications) may vary based on regional availability and local network support. The function may be added via OTA when and where applicable.

2.4 GHz Band Restrictions

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Please ensure the used power adapters are compliant with applicable country regulations and international and regional safety standards.

Frequency Bands and Power

This tablet offers the following frequency bands in EU areas only and maximum radio-frequency power:

• Bluetooth: 20 dBm
• Wi-Fi 2.4 GHz band: 20 dBm
• Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm, 5945 – 6425 MHz: 23dBm
• Wireless reverse charging: 110-148 KHz < 37.7 dBuA/m at 10m Distance

E-label

This device has an electronic label for certification information. To access it, please go to Settings > About tablet > Certification, or open Settings and type "Certification" into the search bar.

Model Information

Model: 24091RPADG. 2409 indicates that this product will be launched after 202409.

When using this device as a wireless charger, it is intended for use as a desktop device and should not be carried when in this mode. To comply with RF exposure requirements when using in wireless charging mode, please place the device at a minimum distance of 20cm from persons.

NBTC

The telecommunication equipment and this device conform to the requirements of NBTC.

Certification Information (Highest SAR)

This radio communication equipment has the specific absorption rate (SAR) of 0.993 W/kg, which is in compliance with the Safety Standard for the Use of Radio communication Equipment on Human Health announced by the National Telecommunications Commission.

Disclaimer

This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

Manufacturer Information

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085

Brand: Xiaomi

Model: 24091RPADG

© Xiaomi Inc. All rights reserved.