Assembly Instruction
Item No: 194840327110
Product: SWIVEL GLIDER RECLINING CHAIR, TOP GRAIN LEATHER MATCH PVC
Note: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking the wood.
Component List
| No. | Drawing | Qty | Description |
|---|---|---|---|
| A | [Image of chair seat] |
1 PC | SEAT |
| B | [Image of chair back rest] |
1 PC | BACK REST |
Assembly Steps
-
Step 1
Turn over the package during unpacking. Cut off the rope that tightens the swivel and mechanism. [Scissors cutting rope icon]
[Diagram showing package unpacking and rope cutting]
-
Step 2
Align the female brackets at the back rest onto the male brackets at the seat. Insert the back rest to the seat, then push to the end and make sure it is fixed in position securely. [Arrow pointing from back rest brackets to seat brackets]
[Diagram showing back rest installation with labels A and B indicating connection points]
-
Step 3
Back Rest Installation [Velcro icon]
[Diagram illustrating the connection of the back rest to the seat, possibly showing a velcro mechanism]
-
Step 4
[Diagram showing a person sitting in the chair in various reclining positions, including a 360-degree swivel indication]
Care Instruction for Genuine All Leather / PVC
In order to maintain the original appearance of your leather furniture, please follow below simple care procedure:
- Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Exposure to sunlight or heating and air conditioning outlets will fade/damage leather.
- Wipe gently with a damp soft cloth to remove dust, dirt and any grime build up.
- Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.
