Assembly Instructions

Important Attentions

Hello! Please read these important attentions...

Please put a thick carpet on the ground to protect the furniture finish and corners. During the installation process, DON'T fasten screws tight 100% at a time.

Chair Assembly

Components:

Note: The accessory pack does not include a screwdriver. Please prepare a screwdriver before you assemble.

Step 1:

Take the leg frame 1 (B), leg frame 2 (C) and seat frame (A) and connect them together.

Use the Allen M4 (J) and screws (F) to connect the leg frame to the seat frame (A).

Step 2:

Use screw (H) to connect the two leg frames (C) and (B) together. Then use the Allen M4 (J) and screws (G) to connect the leg frame 1 (B) and the leg frame 2 (C).

After tightening the screws, use the plastic lid (I). Cover the four screw heads.

Step 3:

Put the Back and Seat cushion on the Chair.

Step 4:

Assembly Complete.

Table Assembly

Components:

Step 1:

Use the Allen M4 (G) and Screws 7X90MM (D) to connect the Supporting Leg (B) with the Table Top (A).

Use the Allen M4 (G) and the Screws 7X70MM (E) to connect the Connecting Rod (C) to the Supporting Legs (B).

This process requires four operations.

Step 2:

Use the Plastic Lid (F) to cover the screw heads.

Step 3:

Assembly Complete.