Assembly Instruction
Item No: 194840333722
Power Left Side Reclining Chair with Power Headrest and Charging Ports
⚠️ Note: Do not use power tools for assembly. The use of power tools increases the risk of over-tightening, which can result in wood splitting or cracking.
Component List
| No | Drawing | Qty | Description |
|---|---|---|---|
| A | [Seat] | 1 | SEAT |
| B | [Plastic Legs] | 2 | PLASTIC LEGS Ø60*40mm |
| C | [Plug] | 1 | PLUG |
Step #1
Diagram Description: An illustration of the reclining chair with labels pointing to different functions and ports. The labels indicate: 'Reset', 'Open footrest', 'Open height headrest', 'USB', 'Type-C', 'Close footrest', and 'Close height headrest'.
Step #2
Diagram Description: This step shows the underside of the chair. It indicates that 'Legs And Adaptor/Plug Inside'. Components labeled 'A' (Seat) and 'B' (Plastic Legs) are shown being attached to the chair base. A 'Connector' is also indicated.
Step #3
Diagram Description: This step illustrates the connection of the chair's power adapter to an 'Electrical Wall Outlet'. The power cord and adapter are shown connecting to the chair's internal mechanism.
Step #4
Diagram Description: A visual representation of the fully assembled reclining chair in its reclined position.
Step #5
Diagram Description: This step shows various configurations of the reclining chair, labeled as 'LRPWH', 'ARPWH', 'CR', 'AC', and 'RRPWH', likely representing different assembled states or modules.
Step #6
Diagram Description: Similar to Step 5, this step displays different arrangements of the chair modules, again labeled with 'LRPWH', 'ARPWH', 'CR', 'AC', and 'RRPWH'.
Step #7
Diagram Description: This step shows a sectional view of the assembled chair, with modules labeled 'LRPWH', 'ARPWH', 'CR', 'AC', and 'RRPWH' forming a larger seating arrangement.
Care Instruction for Textured Fabric Furniture:
In order to maintain the original appearance of your textured polyester Furniture, please follow below simple care procedures:
- Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Sunlight and or exposure to heating and air conditioning outlets will fade/damage textured fabric.
- Vacuum or wipe with a soft cloth to remove dust.
- Hardware may loosen over time. Periodically check to make sure all connections are tight, Re-tighten if necessary.
⚠️ For items use on wooden floor, hard surfaces or carpets, it is recommended to install protective pads under all legs and supports to avoid/prevent from damages/scratches and discoloration.
