PATENT PRODUCT Grille Installation Instruction
Rev. 181101
Part Information
Part#: D65719C/S/J
Application: For 2006-2008 Dodge Ram
Parts List
| Item | Part Name | QTY | Description | Item | Part Name | QTY | Description |
|---|---|---|---|---|---|---|---|
| 1 | Billet Grille | 4 | Stainless steel | 4 | Truss Head Screws | 16 | 6#-32x1.5" |
| 2 | Tabs | 16 | 5 | Nylon Lock Nuts | 16 | 6-32 | |
| 3 | Flat Washers | 16 |
Install Notes
Overlay: ✔️ Replacement: ❌ Drill: ❌ Cut: ❌
Installation Steps
| Step | Description | Illustration |
|---|---|---|
| 1 | Identify the grille & hardware with parts list. | [Image of a billet grille] |
| 2 | Remove the grille shell bolts in order to remove the grille from the hood. | [Image of someone removing bolts from a car grille] |
| 3 | Center the billet grille into the opening of the factory grille shell. Secure the bolt to the threaded holes on the front of the grille. Be sure the bolts are through the OEM grille shell. | [Image showing the grille being centered and bolts secured] |
| 4 | Secure billet grille using the tabs, washers and lock nuts from the back side of the OEM grille shell. | (16) Tabs, (16) Flat Washers and (16) Nylon Lock Nuts [Image showing tabs, washers, and lock nuts securing the grille from the back] |
| 5 | Make sure the billet grille is centered and tighten the fasteners. | [Image showing a close-up of tightened fasteners] |
| 6 | Reinstall the factory grille shell to the vehicle. | |
| 7 | Installation completed!!! |
The instruction here is for your reference only. You may need to bend the grille a little bit to adjust to fit. We strongly recommend the professional installer for best result. We are not responsible for any damage caused by the installation. Thank you for choosing our product!
Page 1 of 1
