Generac Guardian Series Residential Standby Generators
8/11 kW Air-Cooled Gas Engine
Generac Guardian Series generators provide reliable backup power for residential use. This document outlines the features, specifications, and available accessories for the 8 kW and 11 kW models.
Key Features and Inclusions:
- True Power™ Electrical Technology: Delivers utility-quality power with less than 5% Total Harmonic Distortion, ensuring safe operation of sensitive electronics.
- Evolution™ Controller: A two-line LCD multilingual digital controller (English/Spanish/French/Portuguese) with a user-friendly interface.
- Transfer Switch Options: Available with a 50 Amp Pre-Wired Switch or a 200 Amp Smart Switch.
- Electronic Governor: Provides stable frequency and voltage output.
- Sound Attenuated Enclosure: Offers quiet operation and protection from the elements.
- Flexible Fuel Line Connector: For easy connection to fuel sources.
- Composite Mounting Pad: Eliminates the need for a concrete pad in most installations.
- Fuel Type: Operates on Natural Gas or LP Gas.
- Warranty: Includes a 5 Year Limited Warranty.
- Installation Flexibility: Can be installed as close as 18 inches (457 mm) from a building, subject to local codes.
- Innovative Design & Prototype Testing: Generac's commitment to rigorous testing ensures reliability and superior performance.
- Solid-State, Frequency Compensated Voltage Regulation: Ensures optimized response to load changes and maximum motor starting capability with digital voltage regulation at ±1%.
- Single Source Service Response: Generac's dealer network provides comprehensive parts and service.
- Generac Transfer Switches: Designed for total system compatibility and reliability.
Specifications:
Generator:
- Models: 006237-0, 006245-0 (8 kW); 006437-1, 006438-1, 006439-1 (11 kW); 006720-0 (11 kW Aluminum)
- Standby Power Rating: 8 kW (LP/NG), 11 kW (LP), 10 kW (NG)
- Rated Voltage: 240V
- Total Harmonic Distortion: Less than 5%
- Main Line Circuit Breaker: 35 Amp (8kW), 50 Amp (11kW)
- Frequency: 60 Hz
- Power Factor: 1.0
- Unit Weight: Approx. 360/163.3 lbs/kg (8kW), 407/184.6 lbs/kg (11kW)
- Dimensions (L x W x H): Approx. 48 x 25 x 29 in / 1218 x 638 x 732 mm
- Sound Output: 62-63 dB(A) at 23 ft (7 m) at normal load.
Engine:
- Type: Generac OHVI® or OHVI V-TWIN
- Cylinder Block: Aluminum with Cast Iron Sleeve
- Ignition System: Solid-state with Magneto
- Governor System: Electronic
- Compression Ratio: 9.5:1
- Oil Capacity: Approx. 1.5 qt/1.4 L (8kW), 1.7 qt/1.6 L (11kW)
- Operating rpm: 3,600
Fuel Consumption:
- Natural Gas: 78 ft³/hr (2.21 m³/hr) at 1/2 load, 121 ft³/hr (3.43 m³/hr) at full load.
- Liquid Propane: 31.6 ft³/hr (0.87 gal/hr) [3.29 L/hr] at 1/2 load, 51.6 ft³/hr (1.42 gal/hr) [5.37 L/hr] at full load.
Controls:
- Display: 2-Line Plain Text Multilingual LCD
- Mode Buttons: Auto, Manual, Off
- Features: Ready to Run/Maintenance Messages, Engine Run Hours, Programmable Exerciser, Utility Voltage Monitor, Generator Voltage Monitor, Engine Warm-up, Engine Cool-down, Smart Battery Charger, Main Line Circuit Breaker, Electronic Governor.
Transfer Switch Options:
Pre-Wired Switch Features:
- Electrically operated, mechanically-held contacts.
- Rated for all classes of load.
- 2 pole, 250 VAC contactors.
- 30 millisecond transfer time.
- Main contacts are silver plated or silver alloy.
- NEMA 1 indoor rated enclosure.
- Includes pre-wired 30 foot (9.1 meter) whip and 5 foot (1.5 meter) connection whip.
- Available for 8 kW and 11 kW models.
- Circuit Breaker Protected Available RMS Symmetrical Fault Current @ 250 Volts: 10,000 Amps.
Smart Switch Features (Available on 11 kW model only):
- Includes Digital Power Management Technology (DPM).
- Intelligently manages two air conditioner loads without additional hardware.
- Can manage up to four additional large (120/240 VAC) loads with Power Management Modules (PMMs).
- Electrically operated, mechanically-held contacts.
- Rated for all classes of load.
- Service equipment rated, dual coil design.
- Rated for aluminum and copper conductors.
- NEMA/UL 3R aluminum outdoor enclosure.
- Main contacts are silver plated or silver alloy.
- 200 Amps, 120/240 Volts.
Available Accessories:
- Mobile Link™: Allows remote monitoring of generator status via internet connection (PC or smart device).
- 26R Wet Cell Battery: Recommended battery for system startup.
- Cold Weather Kit: Maintains optimal battery and oil temperatures in temperatures below 32 °F (0 °C). Includes battery warmer and oil filter heater.
- Auxiliary Transfer Switch Contact Kit: Locks out single large electrical loads. Not compatible with 50 amp pre-wired switches.
- Fascia Base Wrap Kit: Provides a sleek appearance and protects against rodents and insects.
- Paint Kit: For touching up scratched or damaged generator enclosures.
- Scheduled Maintenance Kit: Provides hardware for complete routine maintenance.
- Wireless Remote Monitor: Provides instant status information wirelessly. Not compatible with CorePower or EcoGen systems.
- PMM Starter Kit: Enables the use of 24 VAC Power Management Modules (PMMs).
- Power Management Module (50 Amps): Increases Smart Switch power management capabilities. Requires PMM starter kit. Not compatible with pre-wired switches.
Dimensions & UPCs:
Refer to the installation manual for exact dimensions. The provided diagrams show approximate dimensions for left side and front views.
UPCs:
- 006245-0: 696471062458
- 006237-0: 696471062373
- 006439-0: 696471064391
- 006437-0: 696471064377
- 006438-0: 696471064384
- 006720-0: 696471067200