Paul Neuhaus Q Smart Home Lights

Fitting Instructions

Product Information:

• Product Name: Q-Marko LED Ceiling Light
• Energy Efficiency Class:
• Voltage: 230V/50Hz
• Light Source: 1x LED-Board 24V DC/38W, 1x LED-Board 24V DC/12.5W (not changeable)
• Color Temperature: 2700-5000 K / RGB
• Luminous Flux: 4900 lm / 1500 lm
• Power Consumption: 38W / 12.5W
• Lifespan: 25,000 hours
• Switching Cycles: 15,000
• Response Time: <0.5 s
• Wireless Technology: 2.4 GHz, 10 dBm
• Included: IR remote control (2x AAA, 1.5V batteries required)
• Certifications: CE

1. Montage/Fitting

As a ceiling light:

Visual Description: The diagram shows a circular light fixture being mounted to a ceiling. It illustrates attaching the fixture to a mounting plate with screws and connecting wires.

• Secure the mounting plate to the ceiling using appropriate screws (not included).
• Connect the electrical wires as per the electrical connection section.
• Attach the light fixture to the mounting plate.

2. Electrical Connection

230 Volt / 50 Hz Connection:

Visual Description: The diagram shows the electrical wiring. Wires labeled 'N' (neutral) and 'L' (live) from the 230V supply are connected to corresponding terminals on the light fixture. A ground wire is also shown connected.

• Connect the neutral wire (N) to terminal 'a'.
• Connect the live wire (L) to terminal 'b'.
• Ensure all connections are secure.

3. Teach Remote Control

Pairing the Q-Remote Control:

Visual Description: The diagram illustrates the process of pairing the remote control with the light fixture. It shows the remote control's antenna and a reset button on the fixture. A sequence of on/off switching is depicted with time intervals.

• Refer to the Q-Remote Control manual for detailed instructions.
• Resetting for Zigbee Network Integration: To integrate the lamp into a Zigbee network, reset the lamp to its factory settings.
• Reset Procedure:
1. Switch on the lamp.
2. Wait 5-10 seconds.
3. Switch off the lamp.
4. Wait 1-2 seconds.
5. Switch on the lamp.
6. Wait 1-2 seconds.
7. Switch off the lamp.
8. Wait 1-2 seconds.
9. Switch on the lamp.
10. Wait 1-2 seconds.
11. Switch off the lamp.
12. Wait 1-2 seconds.
13. Switch on the lamp.
• The lamp will flash to confirm the reset.

General Information

Visual Description: The document includes a QR code linking to the instruction manual and a CE conformity mark.

• Read the instruction manual for further details.